Develop Reference

Cannot get android device to talk to local server

I have done this successfully before but I am not sure what is going on in this case.
Case that worked:
When I am at home and I connect my computer and my phone to same wifi such that they are on the same network. I can lookup the IP address of my computer and use that IP on my android app to talk to my computer. The local IP is something like 192.168.1.5.
However now I am using a public wifi router. When I connect my computer to wifi I get an IP like 10.10.77.162. When I try to use that IP in my android app to talk to my computer it fails everytime.
What am I doing wrong? Is there an easy way around this?

You have to make sure you forward the port you connect on from your router to your local computer inside your network. Similar to when you open ports for some games such as wow.

Connect your phone the same WiFi network.
Addresses in the 192.168.* and 10.* range aren't globally accessible. They're only used for local networks. If both devices are on the network, they can communicate with each other, but they can't if only one is.

Basically this was due to the fact that I was on a public network in which the router was outside of my control. The router was blocking traffic as one would expect.

Setting up a P2P connection between two android phones?

I am trying to develop an android application, through I could share some files or other applications in real time(can be thought as a miniature version of remote desktop sharing). So I am trying to set up a P2P connection between 2 phones, but for that phones would be requiring IP address of each other. Is there any way by which I can get the IP address of the other device by just using the phone number. If not then how will I get to know the IP addresses of the devices?
Could you please post some other suggestions for setting up a real-time P2P connection ?

The phones don't have public IP addresses, and aren't (usually) in the same subnet, so you can't just send IP packets directly from one to the other. You'll need a server to relay the packets. One way I've done this is to use the asmack library and an XMPP server like OpenFile.

Socket communication with android devices

Can i interact with a server(android device) from a client(android device) just to query a database located in the server using TCP sockets?

And Yes and No.
If your device is within wireless network and have own local IP. You can connect to it from client phone if it is in the same network just providing proper IP and Port.
If server phone is located in another wireless network, then Port have to be forwarder using router settings to the server port. Bear in mind that if you will reconnect to wireless network by phone, then IP will be automatically assigned by network infrastructure and it might be changed from previous.
If you want to connect to server phone when it is on 3G network (or similar non wifi), you wont have any specific IP, and it is not static, that way it will be almost impossible to create reliable network. It is more Peer-to-Peer model of network you are looking for.
It is much better if you use Server in the middle as Gateway, that way it will be reliable. The only thing is that you will have to host server and its processes with all traffic and so on.

Socket programming WiFi issue

I am implementing a mobile chat application, I am using socket connection for implementing p2p connectivity. My chat is working fine with android devices. My issue is I can connect a device in 3g network or with in the same WiFi network but the connection is not working when a device form outside WiFi try to connect a device in the WiFi network. I know it's because of the local IP of the device assigned by the WiFi. How can I root and connect a device in the WiFi?

Sounds more like a router settings issue, than an app issue (meaning that users of your app would need to do this for their own networks as well).
Your wifi router needs to know how to forward communication to your device. So say that your app is connecting on port 1234, then you need to tell your router to forward communication from the outside on port 1234 to the internal IP of your phone in your wifi network.
The phone that is outside of the network should target your network's external IP and port 1234.

Sajan, your issue is not only an IP mapping issue, but also a NAT traversal issue. It is not always possible to punch holes in NATs. And when it is, it must be done with some sophisticated techniques including a super peer located outside of your wifi/lan which will read the translated address from your inside peer.
Unless you are using UDP and the NAT is friendly, it is not possible to send TCP communication directly to the inside peer. In most case, you'll have to check what is possible with the NAT, and if there is something possible, you'll need to perform mapping prediction and tell both peer to attempt com on predicted IP addresses.
That's valid if you don't want you users to have to configure their NATs. And even in that case, such configuration will not always be enough (if there are cascades of NATs, or proxies for example).

How to start a local network connection programmatically via Wi-Fi hotspot on Android?

I want to start a local network connection using the built-in Wi-Fi hotspot on Android devices.
Is there a way to accomplish it?
And how to communicate between two devices?
EDIT:
I want to do it programmatically. Then I can transfer my own data between devices.

I haven't done this before, so my answer is all theoretical.
I think what you need to do is declare one device the server and start its hotspot manually with a known name.
Start / stop built-in Wi-Fi / USB tethering from code? (According to this question, you can't start hotspot programatically).
Once you have the hotspot set up, you start up the server app and wait for incoming connections. The server app can show you the ip address or hostname.
On the clients, you can do a simple check and see if the hotspot name is around and automatically connect to it if you find it. See this link for connecting to a network:
Using WifiManager to connect to a network
As for your second question, how to communicate - you need to establish a connection between the devices. For this, you need the ip address of the server. The simplest thing to do would be to show the ip address on the server UI and then manually enter it on the clients and press connect. It would then establish a connection to the server on a known port and you can send messages between client and server.
For reference, I found NanoHttpd, which is a webserver for Android. It uses ServerSocket to listen for incoming connections.

Possible answers:
Before ICS and non rooted devices
There is no way you can connect to a device over wifi. There is no API to do. Bluetooth is your best option or user interaction.
Before ICS and rooted devices
I am not sure if someone hacked the code, but when I tried to do an automatic connection to a wifi spot I noticed:
The api is hidden inside the SDK.
The method that does the connection checks the thread who ask for it. If it's not the os thread, it throws an exception.
Using ICS
With ICS there is a new way to connect devices through wifi called Wi-Fi Direct.
Here is a link with some demos.

If you are going to develop your own application for each and every individual terminals(devices) then i think for you socket programming will do the trick .
Yes , android supports socket programming in the same was as java socket programming .
1st google java socket programming tutorials and then you can using the same knowledge in android .
Also do remember to include the uses internet permission in the manifest , actually thats something which ate my brains for a long time :)

You mean communication between wifi enabled devices without any server like p2p? if so its wifi direct which is supported in ICS check this out http://developer.android.com/reference/android/net/wifi/p2p/package-summary.html
Before ICS there is no standard android API for wifi direct, though Galaxy S2 has wifi direct it uses proprietary API's which 3rd party devs can't use.

i dont know programmically create wify LAN,but you can create wify LAN manually,then you can do java tcp/udp program as said by brianestey
"As for your second question, how to communicate - you need to establish a connection between the devices. For this, you need the ip address of the server. The simplest thing to do would be to show the ip address on the server UI and then manually enter it on the clients and press connect. It would then establish a connection to the server on a known port and you can send messages between client and server."
for manual connection follow the steps
take settings/wireless&networks/portable wi-fi hotspot settings from any one of the phone
create new hotspot and turn on wi-fi portable hotspot from there
connect all other device to that hotspot including your pc
you will get ip of each device programmically (includig pc,but i dont know)