Develop Reference

Job failed using Gitlab

I have used the Gitlab for run the CI plan.
Problem sequence:
Run the CI plan, with below yaml script, now CI getting passed
Again run the CI plan, now CI getting failed with below error code
warning: failed to remove MediaDrmCts/app/build/outputs/apk/debug/output.json: Invalid argument
Environment:
Gitlab runner in Windows PC
Shell
Yaml Code:
assembleDebug:
stage: build
script:
- echo 'start building...'
- cd MediaDrmCts
- ./gradlew clean assemble
artifacts:
paths:
- MediaDrmCts/app/build/outputs/
debugTests:
stage: test
script:
- cd MediaDrmCts
- ./gradlew -Pci --console=plain :app:testDebug
Error Log:
Please help us to resolve the issue?

This could be related to the issues in GitLab with killing processes on Windows:
tl;dr the windows runner (current version is around ~13.6 with no fix yet) can't kill the full tree of processes started in the job properly, so processes holding file locks are left around for the next job/pipeline to fail on when it attempts to clean up
https://gitlab.com/gitlab-org/gitlab-runner/-/issues/3185
https://gitlab.com/gitlab-org/gitlab-runner/-/issues/3121
I've had similar issues in the past and a workaround is to clean up troublesome directories in the job that makes them, rather than letting the git clean command clean them up in the next job.
One option:
debugTests:
stage: test
script:
- cd MediaDrmCts
- ./gradlew -Pci --console=plain :app:testDebug
after_script:
- if (Test-Path ./MediaDrmCts/app/build) { Remove-Item ./MediaDrmCts/app/build -Recurse -Force; }
...
Another option
If your builds aren't sensitive to how clean the repo folder is, then you can try turning off the git clean -ffdx step in your .gitlab-ci.yml file:
...
variables:
GIT_CLEAN_FLAGS: none
...
which will tell the GitLab runner not to attempt cleaning up the repository of extra files before each run.
Keep in mind that this may have some unintended consequences, such as the wrong files being left over from previous runs on other branches, so be wary, and have good tests!

Cannot Find entry file index.ios.js in any of the project roots ["/Users/neo/newProjects/F2"]

Actual Behavior
Instead of launching, I get a red screen and this error message when launching a react native projects from scratch: Cannot Find entry file index.ios.js in any of the project roots ["/Users/neo/newProjects/F2"]
Expected behavior
Launch of a clean app starter
What I am trying to do
I'm trying to init and run a react-native project from scratch in the android and ios simulator, but I'm getting the following error.
What I have tried
I've tried doing the following:
Install via documentation
Moving through the install steps outlined here several times:
https://facebook.github.io/react-native/docs/getting-started.html
NPM Install
Performing NPM Install from within the project folder
Editing .profiles ( android )
editing the ~.profiles file, to set the android home variable.. this is what it looks like now:
export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH for scripting
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" $
export ANDROID_HOME=${HOME}/Library/Android/sdk
export PATH=${PATH}:${ANDROID_HOME}/tools
export PATH=${PATH}:${ANDROID_HOME}/platform-tools`
Npm start
Running npm start and checking activity on the port, ( was the package manager running )
checking the port for activity
( forget how, verified its available )
Code that worked for someone...
I have also tried running this code in the terminal
react-native bundle \
--entry-file=index.ios.js \
--platform=ios \
--dev=false \
--assets-dest=./production/ios \
--bundle-output=./production/ios/ios.jsbundle
After reviewing this article https://github.com/facebook/react-native/issues/8664
And got this error message:
ENOENT: no such file or directory, open './production/ios/ios.jsbundle'
I noticed this suggestion
rerunning npm install and rnpm link
I tried running rnpm link, but got "no such command found"
after reading this article
Entry file error in react native from packager
In the same article I saw this:
"Figured out that after updating to RN 0.28 my app is spitting this issue due to incompatible dependencies. This is how I solved this problem"
rm -rf node_modules
npm cache clean
Then open package.json except react-native change all package versions to *
Then run
npm update --save
npm update --save-dev
Check package if package.json is updated with version numbers, if not verify from npmjs and update manually
Delete app from the device and try to run again
But I cannot discern what the advisor is doing here... and the logic behind it... if it seems relevant, can someone comment on this?
Terminal Output
I am getting this in the terminal:
Loading dependency graph, done.
error: bundling: Error
at DependencyGraph._getAbsolutePath
(/Users/neo/newProjects/F2/node_modules/react-native/packager/src/node-haste/index.js:272:11)
at DependencyGraph.getDependencies (/Users/neo/newProjects/F2/node_modules/react-native/packager/src/node-haste/index.js:216:26)
at Resolver.getDependencies (/Users/neo/newProjects/F2/node_modules/react-native/packager/src/Resolver/index.js:106:27)
at _resolverPromise.then.resolver (/Users/neo/newProjects/F2/node_modules/react-native/packager/src/Bundler/index.js:561:62)
at process._tickCallback (internal/process/next_tick.js:109:7)
Bundling `index.ios.js` 0.0% (0/1), failed.
Versions
Node v7.9.0
react-native-cli: 2.0.1
react-native: 0.44.0
Homebrew 1.2.0
Just updated xcode
OSX 10.11.6 (15G1004)
What I notice
I notice that it seems to be looking in this file.. ["/Users/neo/newProjects/F2"] whereas in some locations on my machine the files are organized Users/Neo/... ( capital username ) ... and I sense that has something to do with this.
also, on project build it does throw this warning... not sure what it means...
"react-native#0.44.0" has unmet peer dependency "react#16.0.0-alpha.6"
Any suggestions or ideas?
update
tried changing directories out of the users folder and initializing
here is what I got in the stacktrace
2017-05-02 09:25:21.478 xcodebuild[52491:5334564] Error saving log: Error Domain=NSPOSIXErrorDomain Code=2 "No such file or directory" UserInfo={NSFilePath=/code/F4/ios/build/Logs/Build/B9E13558-CCE5-4451-AC21-7E643189BF7B.xcactivitylog, NSLocalizedDescription=No such file or directory} | User info: {
NSFilePath = "/code/F4/ios/build/Logs/Build/B9E13558-CCE5-4451-AC21-7E643189BF7B.xcactivitylog";
NSLocalizedDescription = "No such file or directory";
}
Installing build/Build/Products/Debug-iphonesimulator/F4.app
An error was encountered processing the command (domain=NSPOSIXErrorDomain, code=2):
Failed to install the requested application
An application bundle was not found at the provided path.
Provide a valid path to the desired application bundle.
Print: Entry, ":CFBundleIdentifier", Does Not Exist
Command failed: /usr/libexec/PlistBuddy -c Print:CFBundleIdentifier build/Build/Products/Debug-iphonesimulator/F4.app/Info.plist
Print: Entry, ":CFBundleIdentifier", Does Not Exist
Also, tried installing expo and running from there...
Heres what the terminal shows
Error sourcing shell startup scripts: /Users/neo/.bash_profile: line 2: rbenv: command not found
/Users/neo/.bash_profile: line 4: rbenv: command not found
/Users/neo/.bash_profile: line 5: rbenv: command not found
/Users/neo/.bash_profile: line 7: rbenv: command not found
/Users/neo/.bash_profile: line 9: rbenv: command not found
/bin/bash: shell_session_update: command not found
.
Please run npm install -g exp && exp path``
10:25:22 AM
Starting React Native packager...
10:25:31 AM
Scanning 656 folders for symlinks in /code/my-new-project/node_modules (11ms)
10:25:32 AM
Loading dependency graph.
10:25:32 AM
Running packager on port 19001.
10:25:32 AM
10:25:37 AM
Dependency graph loaded.
10:25:51 AM
Project opened! You can now use the "Send Link" or "Device" buttons to view your project.
10:36:58 AM
Couldn't start project on Android: could not install *smartsocket* listener: Address already in use
ADB server didn't ACK
* failed to start daemon *
error: cannot connect to daemon
`

Install Calabash-Android causes error on OS X Mavericks

I need some help with trying to install Calabash-Android. After installing rvm, home-brew, when I install Calabash i get a strange error:
sudo gem install calabash-android
Building native extensions. This could take a while...
ERROR: Error installing calabash-android:
ERROR: Failed to build gem native extension.
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby extconf.rb
checking for main() in -lc... yes
creating Makefile
make "DESTDIR="
compiling gherkin_lexer_ar.c
ragel/i18n/ar.c.rl:440:1: warning: control may reach end of non-void function [- Wreturn-type]
}
^
ext/gherkin_lexer_ar/gherkin_lexer_ar.c:864:18: warning: unused variable 'lexer_en_main' [-Wunused-const-variable]
static const int lexer_en_main = 1;
^
2 warnings generated.
linking shared-object gherkin_lexer_ar.bundle
clang: error: unknown argument: '-multiply_definedsuppress' [-Wunused-command-line- argument-hard-error-in-future]
clang: note: this will be a hard error (cannot be downgraded to a warning) in the future
make: *** [gherkin_lexer_ar.bundle] Error 1
Gem files will remain installed in /Library/Ruby/Gems/2.0.0/gems/gherkin-2.12.2 for inspection.
Results logged to /Library/Ruby/Gems/2.0.0/gems/gherkin- 2.12.2/ext/gherkin_lexer_ar/gem_make.out
doronkatz#Dorons-MacBook-Air ~ $ mkdir ~/android
doronkatz#Dorons-MacBook-Air ~ $ mkdir ~/android
mkdir: /Users/doronkatz/android: File exists
doronkatz#Dorons-MacBook-Air ~ $ sudo gem install calabash-android
Password:
Building native extensions. This could take a while...
ERROR: Error installing calabash-android:
ERROR: Failed to build gem native extension.
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby extconf.rb
checking for main() in -lc... yes
creating Makefile
make "DESTDIR="
compiling gherkin_lexer_ar.c
ragel/i18n/ar.c.rl:440:1: warning: control may reach end of non-void function [-Wreturn-type]
}
^
ext/gherkin_lexer_ar/gherkin_lexer_ar.c:864:18: warning: unused variable 'lexer_en_main' [-Wunused-const-variable]
static const int lexer_en_main = 1;
^
2 warnings generated.
linking shared-object gherkin_lexer_ar.bundle
clang: error: unknown argument: '-multiply_definedsuppress' [-Wunused-command-line- argument-hard-error-in-future]
clang: note: this will be a hard error (cannot be downgraded to a warning) in the future
make: *** [gherkin_lexer_ar.bundle] Error 1
Gem files will remain installed in /Library/Ruby/Gems/2.0.0/gems/gherkin-2.12.2 for inspection.
Results logged to /Library/Ruby/Gems/2.0.0/gems/gherkin- 2.12.2/ext/gherkin_lexer_ar/gem_make.out
Not sure what the error means, I have installed Xcode tools for mavericks as well. Any thoughts out there?

I had the same problem and I just found out a solution for this.
I found one related problem here:
http://techespanto.wordpress.com/2013/03/29/upgrade-ruby-version-on-mac-osx/
and it suggested I had to upgrade the ruby version on my machine. The first two commands in that link are not working, so I leave you here what I did:
Install the command line tools for mac with:
xcode-select --install
Install homebrew in your mac with:
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
Install rvm with:
\curl -L https://get.rvm.io | bash -s stable --rails --autolibs=enable
List the latest ruby versions with:
rvm list known
Install the latest ruby version with:
rvm install ruby-<version>
(for me it was ruby-2.1-head)
And that's all. Hope it works for you as well!

You can also try the solution from https://stackoverflow.com/a/22787223/1165581
I looked at the calabash-ios google group for you and I think I have the solution for your
Try installing it like this
sudo ARCHFLAGS=-Wno-error=unused-command-line-argument-hard-error-in-future gem install calabash-cucumber
If that fails you can try to downgrade xcode from 5.1 to one of the previous(Preferences->Locations).
And the reference link

Cannot build cordova project successfully error while executing ant debug command

I was having an error that is Camera not successful invoked on first try (click) so I tried this solution on stackoverflow Phonegap(3.0.0) Camera not successful on first try.
I followed the steps as mentioned in the answer removed android by cordova platform remove android then I run the second command cordova platform add android ;
Now when I use netbeans to run the cordova application on cordova android decvice this error occurs:
exec: ant debug -f "/var/www/mobile/platforms/android/build.xml"
[ 'ant debug -f "/var/www/mobile/platforms/android/build.xml"',
{ [Error: Command failed:
BUILD FAILED
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:720: The following error occurred while executing this line:
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:734: Compile failed; see the compiler error output for details.
Total time: 8 seconds
] killed: false, code: 1, signal: null },
'Buildfile: /var/www/mobile/platforms/android/build.xml\n\n-set-mode-check:\n\n-set-debug-files:\n\n-check-env:\n [checkenv] Android SDK Tools Revision 22.3.0\n [checkenv]
.
.
.**LONG TEXT which I removed from the post **
.
\nBUILD FAILED\n/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:720:
The following error occurred while executing this line:\n/var/www/adt-bundle-linux-x86_64- 20130917/sdk/tools/ant/build.xml:734:
Compile failed; see the compiler error output for details.\n\nTotal time: 8 seconds\n' ]
Error executing "ant debug -f "/var/www/mobile/platforms/android/build.xml"":
BUILD FAILED
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:720: The following error occurred while executing this line:
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:734: Compile failed; see the compiler error output for details.
Total time: 8 seconds
child_process.spawn(/var/www/mobile/platforms/android/cordova/build,[]) = 2
/usr/local/lib/node_modules/cordova/node_modules/q/q.js:126
throw e;
Error: An error occurred while building the android project.Error executing "ant debug -f "/var/www/mobile/platforms/android/build.xml"":
BUILD FAILED
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:720: The following error occurred while executing this line:
/var/www/adt-bundle-linux-x86_64-20130917/sdk/tools/ant/build.xml:734: Compile failed; see the compiler error output for details.
Total time: 8 seconds
at ChildProcess.<anonymous> (/usr/local/lib/node_modules/cordova/src/compile.js:65:22)
at ChildProcess.EventEmitter.emit (events.js:98:17)
at maybeClose (child_process.js:735:16)
at Socket.<anonymous> (child_process.js:948:11)
at Socket.EventEmitter.emit (events.js:95:17)
at Pipe.close (net.js:466:12)
/var/www/mobile/nbproject/build.xml:256: exec returned: 8
BUILD FAILED (total time: 4 minutes 36 seconds)
any idea about this problem?

I was having a similar issue. I ran ant debug -f "/path/to/project/build.xml" from a separate terminal. It displayed a more specific description of the error (which for me wast that there was a space in the project name). This answer also notes:
config.xml can't have a widget id with number as a first character
after a dot. For example: com.42myapp.test or com.myapp.42test won't
work as well as 42com.myapp.test. It will trigger an error from the
compiler.

I was facing similar issues when i started using the CLI to build apps using cordova and started checking the internet for solutions. While i was at it, i discovered the following things that may help you or anyone else facing the same problem can take some hints from this:
These are some very basic checks that you need to take
1. make sure you have all the required sdk's in place (ANT, Java, Android) and is available when you use these commands on the terminal/command $ ant $ java $ adt. if any of these commands are not found, then you need to get it installed or get the class paths fixed.
make sure your project path does not have spaces. i.e. do not have spaces or special characters in directory names. this issue seems to have been fixed on latest versions of cordova and phonegap, but either cases it is a good practice to follow as ant and java paths could be dependent on the folder names you make.
use -d or -v to get extra debug information on the build process to know where and what is causing the issue. $ cordova build android -d or $ cordova build android -v
Make sure you dont use "#" as the link attribute of author tag in the cordova config.xml on the root of the project. This expects the compiler to interpret a hexadecimal color and fails the build. (this was my problem)
Hope this helps.
er... Happy debugging??

Make sure your Ant is 1.8.0 or later version. Cordova 3.3 demands that.

In the past several days, I found that the conflicting files from Dropbox had a very long name. After renaming it, everything worked.

Running android unit tests from the command line?

I'm trying to run unit tests on the android platform in accordance with tutorial. Say, for example, I want to run tests for Email application. I open /apps/Email/tests/AndroidManifest.xml file, look for the <manifest> element, and look at the package attribute, which is com.android.email.tests, and in the <instrumentation> element I look at the android:name attribute, which is android.test.InstrumentationTestRunner. Now I open the console, and run
$ . build/envsetup.sh
$ lunch 1
$ adb shell am instrument -w com.android.email.tests/android.test.InstrumentationTestRunner
But that fails:
INSTRUMENTATION_STATUS: id=ActivityManagerService
android.util.AndroidException: INSTRUMENTATION_FAILED: com.android.email.tests/android.test.InstrumentationTestRunner
INSTRUMENTATION_STATUS: Error=Unable to find instrumentation info for: ComponentInfo{com.android.email.tests/android.test.InstrumentationTestRunner}
So.. What am I doing wrong?

Please run
python development/testrunner/runtest.py email
and then you will see it works :).
Basically you do not have com.android.email.tests package installed.
You can see what is available for instrumentation
pm list instrumentation
And you should see
instrumentation:com.android.email.tests/android.test.InstrumentationTestRunner
(target=com.android.email)
And when doing
pm list packages
package:com.android.email
package:com.android.email.tests

You may need to setup a test project with the android create test-project command first. Check this page on the Android Dev site: Testing In Other IDE's for more info. I've used this method to enable command line testing with ant.

What I actually forgot to do was building and installing that test packages onto my device/emulator. Discovered that after doing:
$ adb shell
# cd data/packages
# ls
And no com.android.email.tests package there.

My issue was this tag:
<instrumentation
android:name="android.test.InstrumentationTestRunner"
android:label="Tests for app.under.test.package"
android:targetPackage="app.under.test.package" />
Firstly I had the android:name attribute wrong then the target package wrong (above is the correct solution)

Test Package Not Installed on the Emulator
I had the exact same issue and realized that the test package hadn't been installed on the emulator, which is what #marekdef is saying.
Instead of using the command found in the generated test file, I used the following:
ant debug install test
*I had my test project in <project_home>/tests so the following command is what I ended up using from my project home directory:
(cd tests && ant debug install test;)
Hope that helps.

I received the "Unable to find instrumentation info" error under this condition: I defined my test project with a src package name that was the same as that of the project-under-test. For example, the source for both projects was in package com.mycompany.android. This parallel-src-package setup worked fine in Eclipse, but on the emulator it very much appeared that the test apk was overwriting the app apk.
Fix: I changed the src packge of the test project to test.mycompany.android.
Note that, in either case, the Android manifest for the test project defines:
< manifest package="pkg-of-project-under-test" ...>
and
< instrumentation android:targetPackage="pkg-of-project-under-test" ...>

For gradle user you can use the following tasks:
$ gradle :project:installDebug :project:installDebugAndroidTest

I have this run_all_test.sh script to run all unit and instrumented test:
#!/bin/bash
./gradlew --no-daemon clean test connectedCheck --stacktrace;
if [ $? -eq 0 ]
then
echo "tests are successful"
else
echo "tests FAILED"
exit 1
fi
Explanation:
test -> execute all unit test
connectedCheck -> execute all instrumented test
You can start from here to customize it based on your needs following the documentation here: https://developer.android.com/studio/test/command-line

[Android test types]
To run all tests from Command Line using gradlew[About]
JUnit test (UnitTest suffix)
./gradlew test
./gradlew :<moduleName>:test<variantName>UnitTest
Instrument test(AndroidTest suffix)
./gradlew connectedAndroidTest
./gradlew :<moduleName>:connected<variantName>AndroidTest
If you want just to build tests and don't run them use assemble
//Unit
./gradlew :<moduleName>:assemble<variantName>UnitTest
//functional
./gradlew :<moduleName>:assemble<variantName>AndroidTest