Related
I know that Activities are designed to represent a single screen of my application, while Fragments are designed to be reusable UI layouts with logic embedded inside of them.
Until not long ago, I developed an application as it said that they should be developed.
I created an Activity to represent a screen of my application and used Fragments for ViewPager or Google Maps. I rarely created a ListFragment or other UI that can be reused several times.
Recently I stumbled on a project that contains only 2 Activities one is a SettingsActivity and other one is the MainActivity. The layout of the MainActivity is populated with many hidden full screen UI fragments and only one is shown. In the Activity logic there are many FragmentTransitions between the different screens of the application.
What I like about this approach is that because the application uses an ActionBar, it stays intact and does not move with the screen switching animation, which is what happens with Activity switching. This give a more fluent feel to those screen transitions.
So I guess what I'm asking is to share your current development manner regarding this topic, I know it might look like an opinion based question at first look but I look at it as an Android design and architecture question... Not really an opinion based one.
UPDATE (01.05.2014): Following this presentation by Eric Burke from Square, (which I have to say is a great presentation with a lot of useful tools for android developers. And I am not related in any way to Square)
http://www.infoq.com/presentations/Android-Design/
From my personal experience over the past few months, I found that the best way to construct my applications is to create groups of fragments that come to represent a flow in the application and present all those fragments in one Activity. So basically you will have the same number of Activities in your application as the number of flows.
That way the action bar stays intact on all the flow's screens, but is being recreated on changing a flow which makes a lot of sense. As Eric Burke states and as I have come to realize as well, the philosophy of using as few Activities as possible is not applicable for all situations because it creates a mess in what he calls the "God" activity.
Experts will tell you: "When I see the UI, I will know whether to use an Activity or a Fragment". In the beginning this will not have any sense, but in time, you will actually be able to tell if you need Fragment or not.
There is a good practice I found very helpful for me. It occurred to me while I was trying to explain something to my daughter.
Namely, imagine a box which represents a screen. Can you load another screen in this box? If you use a new box, will you have to copy multiple items from the 1st box? If the answer is Yes, then you should use Fragments, because the root Activity can hold all duplicated elements to save you time in creating them, and you can simply replace parts of the box.
But don't forget that you always need a box container (Activity) or your parts will be dispersed. So one box with parts inside.
Take care not to misuse the box. Android UX experts advise (you can find them on YouTube) when we should explicitly load another Activity, instead to use a Fragment (like when we deal with the Navigation Drawer which has categories). Once you feel comfortable with Fragments, you can watch all their videos. Even more they are mandatory material.
Can you right now look at your UI and figure out if you need an Activity or a Fragment? Did you get a new perspective? I think you did.
My philosophy is this:
Create an activity only if it's absolutely absolutely required. With the back stack made available for committing bunch of fragment transactions, I try to create as few activities in my app as possible. Also, communicating between various fragments is much easier than sending data back and forth between activities.
Activity transitions are expensive, right? At least I believe so - since the old activity has to be destroyed/paused/stopped, pushed onto the stack, and then the new activity has to be created/started/resumed.
It's just my philosophy since fragments were introduced.
Well, according to Google's lectures (maybe here, I don't remember) , you should consider using Fragments whenever it's possible, as it makes your code easier to maintain and control.
However, I think that on some cases it can get too complex, as the activity that hosts the fragments need to navigate/communicate between them.
I think you should decide by yourself what's best for you. It's usually not that hard to convert an activity to a fragment and vice versa.
I've created a post about this dillema here, if you wish to read some further.
Since Jetpack, Single-Activity app is the preferred architecture. Usefull especially with the Navigation Architecture Component.
source
Why I prefer Fragment over Activity in ALL CASES.
Activity is expensive. In Fragment, views and property states are separated - whenever a fragment is in backstack, its views will be destroyed. So you can stack much more Fragments than Activity.
Backstack manipulation. With FragmentManager, it's easy to clear all the Fragments, insert more than on Fragments and etcs. But for Activity, it will be a nightmare to manipulate those stuff.
A much predictable lifecycle. As long as the host Activity is not recycled. the Fragments in the backstack will not be recycled. So it's possible to use FragmentManager::getFragments() to find specific Fragment (not encouraged).
In my opinion it's not really relevant. The key factor to consider is
how often are you gonna reuse parts of the UI (menus for example),
is the app also for tablets?
The main use of fragments is to build multipane activities, which makes it perfect for Tablet/Phone responsive apps.
Don't forget that an activity is application's block/component which can be shared and started through Intent! So each activity in your application should solve only one kind of task. If you have only one task in your application then I think you need only one activity and many fragments if needed. Of course you can reuse fragments in future activities which solve another tasks. This approach will be clear and logical separation of tasks. And you no need to maintain one activity with different intent filter parameters for different sets of fragments. You define tasks at the design stage of the development process based on requirements.
There's more to this than you realize, you have to remember than an activity that is launched does not implicitly destroy the calling activity. Sure, you can set it up such that your user clicks a button to go to a page, you start that page's activity and destroy the current one. This causes a lot of overhead. The best guide I can give you is:
** Start a new activity only if it makes sense to have the main activity and this one open at the same time (think of multiple windows).
A great example of when it makes sense to have multiple activities is Google Drive. The main activity provides a file explorer. When a file is opened, a new activity is launched to view that file. You can press the recent apps button which will allow you to go back to the browser without closing the opened document, then perhaps even open another document in parallel to the first.
Thing I did: Using less fragment when possible. Unfortunately, it's possible in almost case. So, I end up with a lot of fragments and a little of activities.
Some drawbacks I've realized:
ActionBar & Menu: When 2 fragment has different title, menu, that
will hard to handle. Ex: when adding new fragment, you can change action bar title, but when pop it from backstack there is no way to restore the old title. You may need an Toolbar in every fragment for this case, but let believe me, that will spend you more time.
When we need startForResult, activity has but fragment hasn't.
Don't have transition animation by default
My solution for this is using an Activity to wrap a fragment inside. So we have separate action bar, menu, startActivityForResult, animation,...
The one big advantage of a fragment over activity is that , the code which is used for fragment can be used for different activities. So, it provides re-usability of code in application development.
use one activity per application to provide base for fragment
use fragment for screen ,
fragments are lite weight as compared to activites
fragments are reusable
fragments are better suited for app which support both phone & tablet
You are free to use one of those.
Basically, you have to evaluate which is the best one to your app. Think about how you will manage the business flow and how to store/manage data preferences.
Think about, how Fragments store garbage data. When you implement the fragment, you have a activity root to fill with fragment(s). So, if your trying to implement a lot of activities with too much fragments, you have to consider performance on your app, coz you're manipulating (coarsely speaks) two context lifecycle, remember the complexity.
Remember: should I use fragments? Why shouldn't I?
regards.
I use Fragments for better user experience. For example if you have a Button and you want to run let's say a webservice when you click it, I attach a Fragment to the parent Activity.
if (id == R.id.forecast) {
ForecastFragment forecastFragment = new ForecastFragment();
FragmentManager fm = getSupportFragmentManager();
FragmentTransaction ft = fm.beginTransaction();
ft.replace(R.id.main_content, forecastFragment);
ft.addToBackStack("backstack");
forecastFragment.setArguments(b);
ft.commit();
}
In that way the user won't have to move in another activity.
And secondly I prefer Fragments because you can handle them easily during rotation.
It depends what you want to build really. For example the navigation drawer uses fragments. Tabs use fragments as well. Another good implementation,is where you have a listview. When you rotate the phone and click a row the activity is shown in the remaining half of the screen. Personally,I use fragments and fragment dialogs,as it is more professional. Plus they are handled easier in rotation.
Almost always use fragments. If you know that the app you are building will remain very small, the extra effort of using fragments may not be worth it, so they can be left out. For larger apps, the complexity introduced is offset by the flexibility fragments provide, making it easier to justify having them in the project.
Some people are very opposed to the additional complexity involved with fragments and their lifecycles, so they never use them in their projects. An issue with this approach is that there are several APIs in Android that rely on fragments, such as ViewPager and the Jetpack Navigation library. If you need to use these options in your app, then you must use fragments to get their benefits.
Excerpt From: Kristin Marsicano. “Android Programming: The Big Nerd Ranch Guide, 4th Edition.” Apple Books.
Some wrong ideas:
Always put an activity in your app and handle different screens with fragments.
Write the UI code directly in the activity.
Handle navigating between screens (I don't mean tabs, I mean for example full-screen views) by fragments.
Activities can be replaced by fragments.
Here is the thing!
Fragments are designed to implement reusable parts of UI and use them in any part of the app that is needed. They are not designed for substituting activities.
When we must use each of them?
When we have an independent screen in which there are some different UI parts (tabs, expandable screens, partial screens, etc...) we should use an activity with some fragments to implement and handle different UI parts separately in the same screen.
Each independent part of the application is actually a component that is conceptually different from other parts and it needs to have an independent activity. For example, the login part may contain some different scenarios like using username-password or using fingerprint. Each scenario can be implemented by a fragment and all login-related fragments should be handled by LoginActivity. But for example, the part of the orders in the application doesn't have a conceptual relationship with login, so it must have a different activity and of course, it may contain some fragments like OrdersFragment, SubmitNewOrderFragment, and etc that all of them must be managed by OrdersActivity.
Do not implement a UI directly in an activity. Always implement UI in fragments and add those fragments in the activity even if there is only one fragment in that activity. It helps you to have more reusable code and change UIs easier.
Never use fragments to navigate infinitely in the application even if you force the user to have a limited number of fragments in the back stack. The fact is that when you add a new fragment into the back stack and remove it, it will not be removed from the memory unless the parent activity gets destroyed and it is only not visible. So when you are using fragment manager back stack, by navigating multiple times between fragments in the same activity (especially in the case of you create a new fragment on each navigation and put them into the back stack) you will get an OutOfMemoryException in the application.
I hope it to be helpful.
This question needs to be reevaluated since Jetpack Compose has reached stable.
Jetpack Compose is Android’s recommended modern toolkit for building
native UI.
from https://developer.android.com/jetpack/compose
The typical jetpack-compose architecture is:
Single Activity, multiple composables, and glued together by jetpack navigation.
Note there's no (need for) Fragments anymore.
See Now in Android for a sample.
I've been developing for Android for a couple of years now, and I still find myself going back and forth on this issue: when should I be using fragments on a backstack versus putting each fragment into its own activity?
In the Android Fragment documentation, they show this diagram:
I understand the tablet use case perfectly, but for the Handset use case, I don't get why you would put each fragment into its own activity. I typically create one activity and add the fragments to the backstack (via FragmentManager). Is either one of these approaches considered the 'right' way to do it? If both are okay, what is a good rule of thumb to use for picking which approach to use?
This question is closely related, but I'm not totally satisfied with it. If you're supposed to use separate activities, what's the point of having a fragment backstack in the first place?
I doubt there is a right way to do it. There are likely some ways that are better than others in some circumstances, but for the most part, the answer will be "it depends."
I have noticed in the latest version (22.x) of the SDK with Eclipse that every Activity that is generated is nothing more than a placeholder for a Fragment. The Fragment is auto generated and contains the view logic. It seems like they want to make Activities nothing more than a placeholder/controller for Fragments. I don't think I agree with that. While I definitely see the use case for Tablets, I feel like this pattern should be used more on an as needed basis than as a general rule. This is just my opinion, but I think moving ALL of the logic into the Fragment sacrifices some of the benefits you get from using an Activity, so it is only a useful pattern if you need to re-use that fragment specifically.
If you're supposed to use separate activities, what's the point of having a fragment backstack in the first place?
Good question. I personally prefer to use many Activities and only use Fragments where I need to re-use the logic/views in multiple places. I think the flow of using startActivity and startActivityForResult and allowing the system to manage your activity stack is just a little easier than trying to manage a huge Fragment back stack and one Activity (again, just my opinion).
So when would I ever use the Fragment back stack? There was actually a very good situation for me to use it recently. I had an Activity that needed to build a very complex object. The Object needed many fields input to the user, so I created a Workflow that walked the user through this process one step at a time. I created a single Activity to handle the creation of this logic. Each step of the UI was a Fragment that took input from the user, reported back to the Activity, then the Activity loaded the next Fragment. The Fragments were added to the back stack so the user could go back to previous steps in the workflow.
Object1CreationActivity
FragmentA --> FragmentB --> FragmentC --> FragmentD
Communication between the Fragments and the Activity should be done with interfaces. This is important if we want to re-use these anywhere else. Because of this, I could re-use much of this code to create another Object.
Object2CreationActivity
FragmentB --> FragmentD --> FragmentE
To summarize, Fragments, Activities, the back stack, these are all powerful tools you can use to make Android applications. There may not be a great rule of thumb for when and how to use them, but as long as you are well versed in how they work together, you can use them as appropriate for your application.
fragments are light weight alternatives to activities....that is one way to look at it. e.g. i have my our app which has about 10-13 screens. Either
I create a new activity for each one of them. OR
I create only a few activities that are logically distinct in functional aspects ad swap view screens in them OR
I create 1 activity and delegate actual screen functional to fragments.
I find the third way much better and manageable. Its kinda saying that fragments allow reuse of view using the framelayout options. Further more you can devise an easy way to share data between fragments as against the heavy weight way of using a Parceable to share stuff between activities.
Also Android API folks are going to focus more on fragment based designs instead of activities so its better to stick with standards. Using fragments i a just a tad more complicated than using activities but is well worth the effort to learn them. Helps create scalable and quiet reusable screen views IMHO.
I know that Activities are designed to represent a single screen of my application, while Fragments are designed to be reusable UI layouts with logic embedded inside of them.
Until not long ago, I developed an application as it said that they should be developed.
I created an Activity to represent a screen of my application and used Fragments for ViewPager or Google Maps. I rarely created a ListFragment or other UI that can be reused several times.
Recently I stumbled on a project that contains only 2 Activities one is a SettingsActivity and other one is the MainActivity. The layout of the MainActivity is populated with many hidden full screen UI fragments and only one is shown. In the Activity logic there are many FragmentTransitions between the different screens of the application.
What I like about this approach is that because the application uses an ActionBar, it stays intact and does not move with the screen switching animation, which is what happens with Activity switching. This give a more fluent feel to those screen transitions.
So I guess what I'm asking is to share your current development manner regarding this topic, I know it might look like an opinion based question at first look but I look at it as an Android design and architecture question... Not really an opinion based one.
UPDATE (01.05.2014): Following this presentation by Eric Burke from Square, (which I have to say is a great presentation with a lot of useful tools for android developers. And I am not related in any way to Square)
http://www.infoq.com/presentations/Android-Design/
From my personal experience over the past few months, I found that the best way to construct my applications is to create groups of fragments that come to represent a flow in the application and present all those fragments in one Activity. So basically you will have the same number of Activities in your application as the number of flows.
That way the action bar stays intact on all the flow's screens, but is being recreated on changing a flow which makes a lot of sense. As Eric Burke states and as I have come to realize as well, the philosophy of using as few Activities as possible is not applicable for all situations because it creates a mess in what he calls the "God" activity.
Experts will tell you: "When I see the UI, I will know whether to use an Activity or a Fragment". In the beginning this will not have any sense, but in time, you will actually be able to tell if you need Fragment or not.
There is a good practice I found very helpful for me. It occurred to me while I was trying to explain something to my daughter.
Namely, imagine a box which represents a screen. Can you load another screen in this box? If you use a new box, will you have to copy multiple items from the 1st box? If the answer is Yes, then you should use Fragments, because the root Activity can hold all duplicated elements to save you time in creating them, and you can simply replace parts of the box.
But don't forget that you always need a box container (Activity) or your parts will be dispersed. So one box with parts inside.
Take care not to misuse the box. Android UX experts advise (you can find them on YouTube) when we should explicitly load another Activity, instead to use a Fragment (like when we deal with the Navigation Drawer which has categories). Once you feel comfortable with Fragments, you can watch all their videos. Even more they are mandatory material.
Can you right now look at your UI and figure out if you need an Activity or a Fragment? Did you get a new perspective? I think you did.
My philosophy is this:
Create an activity only if it's absolutely absolutely required. With the back stack made available for committing bunch of fragment transactions, I try to create as few activities in my app as possible. Also, communicating between various fragments is much easier than sending data back and forth between activities.
Activity transitions are expensive, right? At least I believe so - since the old activity has to be destroyed/paused/stopped, pushed onto the stack, and then the new activity has to be created/started/resumed.
It's just my philosophy since fragments were introduced.
Well, according to Google's lectures (maybe here, I don't remember) , you should consider using Fragments whenever it's possible, as it makes your code easier to maintain and control.
However, I think that on some cases it can get too complex, as the activity that hosts the fragments need to navigate/communicate between them.
I think you should decide by yourself what's best for you. It's usually not that hard to convert an activity to a fragment and vice versa.
I've created a post about this dillema here, if you wish to read some further.
Since Jetpack, Single-Activity app is the preferred architecture. Usefull especially with the Navigation Architecture Component.
source
Why I prefer Fragment over Activity in ALL CASES.
Activity is expensive. In Fragment, views and property states are separated - whenever a fragment is in backstack, its views will be destroyed. So you can stack much more Fragments than Activity.
Backstack manipulation. With FragmentManager, it's easy to clear all the Fragments, insert more than on Fragments and etcs. But for Activity, it will be a nightmare to manipulate those stuff.
A much predictable lifecycle. As long as the host Activity is not recycled. the Fragments in the backstack will not be recycled. So it's possible to use FragmentManager::getFragments() to find specific Fragment (not encouraged).
In my opinion it's not really relevant. The key factor to consider is
how often are you gonna reuse parts of the UI (menus for example),
is the app also for tablets?
The main use of fragments is to build multipane activities, which makes it perfect for Tablet/Phone responsive apps.
Don't forget that an activity is application's block/component which can be shared and started through Intent! So each activity in your application should solve only one kind of task. If you have only one task in your application then I think you need only one activity and many fragments if needed. Of course you can reuse fragments in future activities which solve another tasks. This approach will be clear and logical separation of tasks. And you no need to maintain one activity with different intent filter parameters for different sets of fragments. You define tasks at the design stage of the development process based on requirements.
There's more to this than you realize, you have to remember than an activity that is launched does not implicitly destroy the calling activity. Sure, you can set it up such that your user clicks a button to go to a page, you start that page's activity and destroy the current one. This causes a lot of overhead. The best guide I can give you is:
** Start a new activity only if it makes sense to have the main activity and this one open at the same time (think of multiple windows).
A great example of when it makes sense to have multiple activities is Google Drive. The main activity provides a file explorer. When a file is opened, a new activity is launched to view that file. You can press the recent apps button which will allow you to go back to the browser without closing the opened document, then perhaps even open another document in parallel to the first.
Thing I did: Using less fragment when possible. Unfortunately, it's possible in almost case. So, I end up with a lot of fragments and a little of activities.
Some drawbacks I've realized:
ActionBar & Menu: When 2 fragment has different title, menu, that
will hard to handle. Ex: when adding new fragment, you can change action bar title, but when pop it from backstack there is no way to restore the old title. You may need an Toolbar in every fragment for this case, but let believe me, that will spend you more time.
When we need startForResult, activity has but fragment hasn't.
Don't have transition animation by default
My solution for this is using an Activity to wrap a fragment inside. So we have separate action bar, menu, startActivityForResult, animation,...
The one big advantage of a fragment over activity is that , the code which is used for fragment can be used for different activities. So, it provides re-usability of code in application development.
use one activity per application to provide base for fragment
use fragment for screen ,
fragments are lite weight as compared to activites
fragments are reusable
fragments are better suited for app which support both phone & tablet
You are free to use one of those.
Basically, you have to evaluate which is the best one to your app. Think about how you will manage the business flow and how to store/manage data preferences.
Think about, how Fragments store garbage data. When you implement the fragment, you have a activity root to fill with fragment(s). So, if your trying to implement a lot of activities with too much fragments, you have to consider performance on your app, coz you're manipulating (coarsely speaks) two context lifecycle, remember the complexity.
Remember: should I use fragments? Why shouldn't I?
regards.
I use Fragments for better user experience. For example if you have a Button and you want to run let's say a webservice when you click it, I attach a Fragment to the parent Activity.
if (id == R.id.forecast) {
ForecastFragment forecastFragment = new ForecastFragment();
FragmentManager fm = getSupportFragmentManager();
FragmentTransaction ft = fm.beginTransaction();
ft.replace(R.id.main_content, forecastFragment);
ft.addToBackStack("backstack");
forecastFragment.setArguments(b);
ft.commit();
}
In that way the user won't have to move in another activity.
And secondly I prefer Fragments because you can handle them easily during rotation.
It depends what you want to build really. For example the navigation drawer uses fragments. Tabs use fragments as well. Another good implementation,is where you have a listview. When you rotate the phone and click a row the activity is shown in the remaining half of the screen. Personally,I use fragments and fragment dialogs,as it is more professional. Plus they are handled easier in rotation.
Almost always use fragments. If you know that the app you are building will remain very small, the extra effort of using fragments may not be worth it, so they can be left out. For larger apps, the complexity introduced is offset by the flexibility fragments provide, making it easier to justify having them in the project.
Some people are very opposed to the additional complexity involved with fragments and their lifecycles, so they never use them in their projects. An issue with this approach is that there are several APIs in Android that rely on fragments, such as ViewPager and the Jetpack Navigation library. If you need to use these options in your app, then you must use fragments to get their benefits.
Excerpt From: Kristin Marsicano. “Android Programming: The Big Nerd Ranch Guide, 4th Edition.” Apple Books.
Some wrong ideas:
Always put an activity in your app and handle different screens with fragments.
Write the UI code directly in the activity.
Handle navigating between screens (I don't mean tabs, I mean for example full-screen views) by fragments.
Activities can be replaced by fragments.
Here is the thing!
Fragments are designed to implement reusable parts of UI and use them in any part of the app that is needed. They are not designed for substituting activities.
When we must use each of them?
When we have an independent screen in which there are some different UI parts (tabs, expandable screens, partial screens, etc...) we should use an activity with some fragments to implement and handle different UI parts separately in the same screen.
Each independent part of the application is actually a component that is conceptually different from other parts and it needs to have an independent activity. For example, the login part may contain some different scenarios like using username-password or using fingerprint. Each scenario can be implemented by a fragment and all login-related fragments should be handled by LoginActivity. But for example, the part of the orders in the application doesn't have a conceptual relationship with login, so it must have a different activity and of course, it may contain some fragments like OrdersFragment, SubmitNewOrderFragment, and etc that all of them must be managed by OrdersActivity.
Do not implement a UI directly in an activity. Always implement UI in fragments and add those fragments in the activity even if there is only one fragment in that activity. It helps you to have more reusable code and change UIs easier.
Never use fragments to navigate infinitely in the application even if you force the user to have a limited number of fragments in the back stack. The fact is that when you add a new fragment into the back stack and remove it, it will not be removed from the memory unless the parent activity gets destroyed and it is only not visible. So when you are using fragment manager back stack, by navigating multiple times between fragments in the same activity (especially in the case of you create a new fragment on each navigation and put them into the back stack) you will get an OutOfMemoryException in the application.
I hope it to be helpful.
This question needs to be reevaluated since Jetpack Compose has reached stable.
Jetpack Compose is Android’s recommended modern toolkit for building
native UI.
from https://developer.android.com/jetpack/compose
The typical jetpack-compose architecture is:
Single Activity, multiple composables, and glued together by jetpack navigation.
Note there's no (need for) Fragments anymore.
See Now in Android for a sample.
Are Fragments and Fragment Activities inherently faster than Activities?
If I don't need to load my activity in fragments, should I be using FragmentActivities and Fragments over Activities?
Reason I am asking is because I have been using Activities, exclusively, for years, and the Facebook SDK as well as Google Maps 2.0 have forced me to use Fragments, and I wonder now if they are inherently "better" or not, versus some other implementation.
If this "not constructive" or "too open ended" then obviously the answer is "no". But if there are some Google developer documents or blog on this exact subject, then I would like to be aware of it
I became a believer in Fragments in my last application. Whether or not they are computationally faster, they feel faster because you can swap them in and out basically instantaneously, including full support for the back stack if you do it right (call addToBackStack() on the transaction, or something very similar).
I now use Fragments / Fragment activity for all navigation I want to feel very quick, like clicking on a row to get more details. I only launch new activities for when I want to do a fundamentally different thing and have a clean slate to work with. For instance, I usually have a LoginActivity that deals exclusively with logins/registrations, and at least one more that is the core of the app.
But the fundamental benefit of Fragments still remains their flexibility. I can show fragments on top of other fragments, re-arrange them on different screen sizes, etc. But there are loads of other benefits. It just takes a while to feel natural (just like Activities did at first).
One caveat, I always regret embedding fragments in my layouts. I can't give exact reasons here off the top of my head, but essentially you just lose some flexibility. Instead, I build a normal layout for each fragment, and add a placeholder view in the activity layout, create the fragment programmatically, and use transaction.replace() to add it to the layout. Perhaps because this is the main way I swap fragments in and out of that placeholder view, and prefer to just have a single way of doing things where possible.
yeah, fragments are introduced exclusively for supporting large screens to use the area efficiently.handling fragments is very easy and in terms of memory.but nested fragments makes trouble
Fragments are very useful if you want to split a screen. So you can have different views within the same screen. Another way of using fragments, lets say you've got tabs to categorise items. Could have clothes, shoes as your tabs. Each tab will have a fragment to hold the products. The tabs could either held in activity or a fragment. I do find fragments a slightly faster than activities but really its not something you would really notice in most cases. Regardless if they was intended for speed or not they still seem/feel little quicker.
The downside of using fragments, is certain callbacks like onBackPressed is only in an activity. Fragments has no access to this. I often find its best to minimise how much activities as possible. Also don't forget Activities aren't just views, they're also a screen. Whereas fragment is only a view and doesn't have a screen. tool/action bars etc. are also only for Activities however if your using a custom toolbar, you can use this in a fragment by implementing onTouch(if not button but some object) or onClick(buttons) the method for these will give you what you need. So really there are some drawbacks but there is almost a workaround for at least some of them.
I do agree Fragment transition is awesome and pop the stack when working with back buttons and onBackPressed Does the trick.
I always use a switch in parent activity etc. to see, which fragment needs to be in view, i often update it using interface passing bundle etc. Not sure if anyone else has found a more efficient way or not. But I do find it really useful when switching views.
Yep fragments are top brass for most things.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 9 years ago.
Improve this question
I am thinking of implementing one screen with Activity and all other sreens with Fragments and managing all the fragments thru the activity.
Is it a good idea? and my answer is NO but still I want to know more clearly about this thought.
What are the pros and cons of the idea?
Note:
Please don't give me the link for fragment and activity.
EDIT:
Here is something over Fragments and activity:
Pros:
Fragments are meant to be used with activities as a sub activity.
Fragments are not the replacement for activities.
Fragments are meant for reusability(Need to know in what way reusability can be achieved.).
Fragments are the best way to write code to support both tablets and phones.
Cons:
We need to implement the interface to get the data from fragments.
For dialog we have to go a long way to show it.
Why should we use fragments if we are not considering tablets?
What is the starting time difference between activity and fragment?
It depends on the app you are creating. I've created several apps using both approaches and can't say one way is always better than the other. The latest app I created I used the single Activity approach and a Facebook style navigation. When selecting items from the navigation list I update a single Fragment container to display that section.
That said, having a single Activity also introduces a lot of complexities. Let's say you have an edit form, and for some of the items the user needs to select, or create, requires them to go to a new screen. With activities we'd just call the new screen with startActivityForResult but with Fragments there is no such thing so you end up storing the value on the Activity and having the main edit fragment check the Activity to see if data has been selected and should be displayed to the user.
What Aravind says about being stuck to a single Activity type is also true but not really that limiting. Your activity would be a FragmentActivity and as long as you don't need a MapView then there are no real limitations. If you do want to display maps though, it can be done, but you'll need to either modify the Android Compatibility Library to have FragmentActivity extend MapActivity or use the the publicly available android-support-v4-googlemaps.
Ultimately most the devs I know that went the one Activity route have gone back to multiple Activities to simplify their code. UI wise, on a tablet, you are some times stuck using a single Activity just to achieve what ever crazy interaction your designers come up with :)
-- EDIT --
Google has finally released MapFragment to the compatibility library so you no longer have to use the android-support-v4-googlemaps hack. Read about the update here: Google Maps Android API v2
-- EDIT 2 --
I just read this great post about the modern (2017) state of fragments and remembered this old answer. Thought I would share: Fragments: The Solution to All of Android's Problems
I'm about to finish a project(5 months in development), that has 1 activity, and 17 fragments, all full screen. This is my second fragment based project(previous was 4 months).
Pros
The main activity is 700 lines of code, just nicely managing the order of the fragments navigation.
Each fragment is nicely separated into it's own class, and is relatively small (~couple hundred lines of ui stuff).
Management can say, "hey, how about we switch the order of those screens", and I can do it very easily, as those fragments don't depend on each other, they all communicate through the activity. I don't have to dig through individual activities, to find where they call each other.
my app is very graphics heavy, and would never work as 1 screen 1 activity. All those sub activities in the memory, would make the app run out of memory all the time, so I would have to finish() all non visible activities, and make the same control logic for navigation, as I would do with fragments. Might as well do it with fragments just because of this.
if we ever do a tablet app, we will have an easier time re-factoring stuff, because everything is nicely separated already.
Cons
you have to learn, how to use fragments
First, whatever you do, make sure you have a modular design using model, view, presenter that is not highly dependent on an Activity or a Fragment.
What do Activities and Fragments really provide?
Life cycle events and backstack
Context and resources
Therefore, use them for that, ONLY. They have enough responsibility, don't over complicate them. I would argue that even intantiating a TextView in an Activity or Fragment is bad practice. There is a reason methods like public View findViewById (int id) are PUBLIC.
Now the question gets simpler: Do I need multiple, independent life cycle events and backstacks? If you think yeah maybe, use fragments. If you think never ever, don't use fragments.
In the end, you could make your own backstack and life cycles. But, why recreate the wheel?
Pros
You could control your fragments from a single activity, beacause all fragments are independent of each other. The fragments have a lifecycle (onPause, onCreate, onStart...) of their own. By having a lifecycle, fragments can respond independently to events, save their state through onSaveInstanceState, and be brought back (i.e. such as when resuming after an incoming call or when the user clicks the back button).
Cons
Create complexity in your code of activity.
You have to manage the order of the fragments.
Never the less, it is quite a good idea, as if you need to create an app, where you want to show several views. By this idea, you'll be able to view several fragments in a single view..
It depends on the design layout of your app. Suppose if your using Tabs in ActionBar in the design layout then in the Single Activity of the app one can have fragments being changed on Tab click. So now you have an Activity and say suppose three Tabs in the ActionBar and the view for the tabs being provided by the Fragments, which makes it easy to manage plus is feasible also.
So, it all depends on the design scheme of your app and how you take the decision to build for it.
Pros:
Can be used to create a single interface usable by multiple screen sizes and orientations via xml layouts.
Cons:
Requires more complex code in your activity.
I believe it's a good idea, because using different xml layouts based on the current screen size and orientation can make the app more usable and reduce the need to release multiple versions of your app if you plan on releasing your app for both phones and tablets. If your app will never be used by both tablets and phones, it's probably not worth the trouble.
I'm a proponent of deferring all view inflation to fragments to provide better flexibility. For example having a single landing activity for a tablet which aggregates multiple fragments and reusing the same fragments on a phone to show one screen per fragment. However in the phone implementation I'd have a separate activity for each screen. The activities would not have too much code as they would immediately defer to their fragment counterpart for view inflation.
I think it's a bad idea for the phone implementation to have to change to a single landing activity when tabs or a slide out menu is introduced since the tab or menu navigation just results in a completely new screen.
The most important reason I would give for not using the single activity approach is so that the activity lifecycle can be taken advantage of. Activities contain contextual behavior of a certain portion of the application and fragments supplement that behavior. Having the ability to take advantage of the overridable steps in the activity lifecycle helps to separate one activity's behavior from another with methods such as onPause and onResume. This lifecycle also allows you return to previous context. With the single activity approach, once you leave a fragment you have to create an mechanism to return to it.