Unable to update SDK components within Android Studio 2.1.1 - android

So when I opened Android Studio today, there was a notification telling me that there is an update available for the Android Support Repository. I clicked on the update link and I received this warning:
Due to your system configuration and the packages to be installed, it
is likely that the following packages cannot be successfully installed
while Android Studio is running.
Please exit and install the following packages using the standalone
SDK manager:
-Android Support Repository
I went in the Android SDK settings page and it gave me the same result when clicking Apply.
My SDK is in C:\Android\sdk\ so it can't be a problem with rights elevation. I had the SDK installed before I installed Android Studio, however I had some problems with the SDK so I completely flushed and reinstalled it, while Android Studio was installed.
I also used the edit link next to the path (in the Android SDK settings) and I went through the setup, Android Studio found everything and had nothing to do. There was an update for the latest platform which I did through that instead and Android Studio installed it properly without needing the standalone manager.
Is it just that this component must be updated from the standalone manager or is it a problem with my Android Studio and/or the standalone manager?
UPDATE: I have tried to update from the main menu (after closing the active project) and it still asks me to open the standalone.
To be clear: I can update properly from the standalone SDK manager and there is no problem with opening it, however I have seen a clean install on a colleague's computer and he could install additional components directly inside Android Studio without using the standalone manager at all, so I find it quite annoying to close, update and reopen when I shouldn't have to.
Should I risk to attempt the update from Android Studio (as there is a button for it), reinstall or repair Android Studio or do I need to flush absolutely everything and install from scratch?


I'm not totally sure if this will help but - try uninstalling everything to do with android studio (the ide, sdk, etc.). Also delete every file they created on your computer.
Did you download the 1.2 GB android studio all in one? If not, make sure to grab that one.
Also, make sure your Java SDK is also installed and that your Windows environment variable points to the sdk location correctly.
Finally, you do have to exit android studio in order for the sdk standalone to work properly.
Hope this helps, good luck.

Related

Xamarin - The project is missing Android SDKs required for building

I downloaded a fresh copy of Visual Studio 2019 Community Edition. For installation, I selected only the Xamarin workload for mobile development. I created a new Xamarin.Forms project and it immediately gives the following error:
When I double click the message, I am prompted to Accept the Android SDK License Agreement. I click accept, and nothing changes, I just keep repeating those steps.
Navigating to the Android SDK Manager shows an empty list with an error:
All the solutions I have found online have not worked for me:
Enable "Auto-Install Android SDKs" in Xamarin options
Run Visual Studio as Administrator
Create custom AndroidSdkManager.exe.config file
Uninstall and re-install Visual Studio
Verified JAVA_HOME variable is set correctly
The only thing that resolved the error (before I uninstalled) was changing the Android SDK Manager repository from Microsoft to Google:
This doesn't seem like a proper solution given the warning message shown so I am wondering what else I can do.

If this issue has not been resolved yet, try to:
Open Visual Studio as an admin because the software might be failing to read the files in your system.
Go to Visual Studio > Tools > Android > Android SDK Manager and go to the tools tab and install Android SDK Command Line tools.
Then now, you can double click on the error and the issue should be resolved.

I'm running VS2022 17.4.2 and the same issue appeared on a new 7.0 Maui Blazor App. Closing VS and Running as Administrator, reopening the project, then clicking on the error gave me a License Acceptance. After accepting, all is well.

I was running on Windows 7. The issue was resolved after upgrading to Windows 10 and the Android SDKs installed correctly.

Android SDK not found after Installation of new Android studio 3.0

I installed the new version of Android Studio 3.0.(Which contains only IDE not SDK) in windows 10. When the installation completed, it showed "No Android SDK Found". When I try to setup sdk from SDK manager, all tabs are disabled. Can't able to select SDK tools. If I edit the android location and try to setup sdk component then at the end I get
Nothing to do!
SDK tools directory is missing
I tried with many solutions provided by stackoverflow threads. I even tried to install sdk separately but all the download urls are redirect to Android studio download page which of course doesn't have a sdk. Where do I get the SDK separately ?
What could be gone wrong during setup/installation?

I think you should completely remove the studio(including cache files and previous setting). Try reinstalling again

Android Studio Bug? AntergOS Android SDK can't be installed with Android Studio or AUR

OS : Antergos (Linux)
The problem here is the missing Android SDK, I can not install it from either android-studio-2.2 or AUR.
When I tried to install it from the Android SDK, it does not allow me to check the Android SDK Platform for download
Assuming that Android SDK is already installed I proceed to click next only to be met with this message which confirms that an Android SDK is installed. I then tried to start a project which the program in turn throw an error saying that the Android SDK is not installed. I then check the settings and found that the Android SDK Location is not set. I google for the location of default Android SDK location, which is $HOME/Android/sdk, which does not exist on my machine. The only conclusion I can make is that Android SDK is not installed on my machine. I tried to install it from android-studio-2.2's GUI but it does not let me tick it while saying that it is installed. I then tried to install the Android SDK from the AUR, which returns 'package filename is not valid'.
I tried installing android-studio-2.2 from both AUR and the official android site, neither let me download Android SDK.
What might be the problem? Is it Antergos? Could it be that the default install path is different than many other path on the internet?

You need to reset the older SDK and Android Studio configuration by going to the:
/home/brandon/.. directory
and deleting .AndroidStudio2.2 and Android folder. Make sure you have enabled hidden directory visibility. This will reset old Android Studio setup and start over everything from the beginning.

Use Android Studio with existing Android SDK Tools

NOTICE: I found other questions and answers about the same issue, but the answers are for older versions of Android Studio, and I want confirmation if it still can work for the latest version of Android Studio (2.2.3.0 which was released on December 6, 2016)
I'm new to the Android development and I selected the IDE to use wrongly and before thinking and knowing which IDE to use.
So after this mistake, I must use Android Studio now to use the GRADLE libraries as Eclipse doesn't officialy support them (because Eclipse is now discontinued).
The Android Studio is 1.63 GB (including the Android SDK), while Android Studio is 417 MB (without the Android SDK).
I have Android SDK Tools R25.2.3 ( latest ) already downloaded, so I don't want to download the whole Studio + The Android SDK again.
Is it possible to download the Android Studio without the SDK, then link the SDK to the Studio manually?
I'd be very thankful if someone could help!

Yes it is possible , Studio and SDK can been seen as separate components and they can be linked by providing SDK path in the studio IDE or you can configure you SDK path thorough the setting menu shown at the start screen of android studio.
You can download the standalone IDE through Official Android Studio site.
Note : http://tools.android.com/ has dropped the support of providing separate SDK and IDE components but still IDE can be downloaded individually from Android Official Download Link
Steps to configure after download
1.) Download and Extract the IDE
2.) Find studio or studio64 exe and run the appropriate one in your OS
3.) When you start your studio , it will probably ask for SDK location through a prompt screen and provide the location and hit next and next , eventually it will show you a little process for update window and show you finish screen (Must follow the note below)
3.a) If there was no prompt screen shown then you can configure the SDK path using the setting option on the Splash screen of android studio
3.b) It's possible that when you open an old studio project and SDKis still not configured because every project has it's own setting so again you can see the link in error/log window as configure SDK and just click the link and provide path
Note : Disable internet before configuring you studio otherwise it will look for Updates
Helpful points to possible issue
For old project , replace the old dependencies with the one you have in project structure link for Visual representation of steps
Replace the gradle version with the one supported by your new studio and do the same if any other tool is not found.

Definitely. The Android Studio IDE prompts you to specify the path containing the Android SDK tools, if it doesn't detect the SDK automatically.

No Android SDK found - Android Studio

I have a problem with Android 0.4.2 Studio, when creating a new application, it tells me there is a problem with the rendering and shows me the following problem:
Renderering Problems
No Android SDK found. Please configure an Android SDK.
My setup SDK and JDK is this: Android SDK location: C:\adt-bundle-windows\sdk, I put the path I use in Eclipse SDK, or there may be the problem, if someone has happened and what has been fixed, I'd like to give me the solution, thank you very much.

I just encountered and solve a similar problem.
First you should check the directory like other threads described. Then you can check whether the Build tool version matches your SDK version.
(e.g. for my project, in build.gradle file, you have:)
android {
compileSdkVersion 21
buildToolsVersion "21.1.1" }
and then open you SDK manager, make sure you have the same version of sdk(21.1.1) installed in the selected directoriy:
If not, install it and restart Android Studio. It works for me.
I've also seen other guys saying run Android Studio as administrator would also help:
https://teamtreehouse.com/forum/i-am-getting-this-warning-message-rendering-problems-no-android-sdk-found-please-configure-an-android-sdk

I got the same "No Android SDK Found" error message... plus no rendering for Design window, no little cellphone screen.
My SDK path was correct, pointing to where the (downloaded during setup) SDK lives.
During Setup of the SDK Mgr, I didn't download the latest "preview edition (version 20)"...(I thought it better to use the next most recent version (19)) Later I found, there was no dropdown choice in the AVD Manager to pick Version 19, only the default value of the preview, 20.
I thought "Maybe the rendering was based on a version that wasn't present yet." So, I downloaded all the "preview edition's (version 20)" SDK Platform (2) and system images (4)...
Once download/install completed,
RESTARTED Android Studio and Viola! success... error message gone, rendering ok.

From the File menu, choose Project Structure (if you're running 0.4.4 there's a bug and the menu item doesn't have a title, but it still works), and choose the Android SDK item. You should see something like this where you can set up your JDK and SDK.
After setting it, quit Android Studio and relaunch it for good measure.

i have just discovered, android studio 3.0.1 has no sdk during the installation. because during the installation, it doesn't give sdk as part of install able unlike in recent versions of android studio.

Don't worry just change the
build.gradle
ext.kotlin_version = '1.2.41'
to previous version.
It worked for me hope it works for you too.
Happy coding.

According to the Android Studio download page, the SDK comes bundled with Android Studio. It has its own copy when you install Android Studio.
ADT is a plugin for Eclipse. Try reading through that webpage to see if there is something that got missed when installing.
Here is the wording from the site, regarding ADT:
Similar to Eclipse with the ADT Plugin, Android Studio provides integrated Android developer tools for development and debugging.

I wanted to share a part of the issue I had because it is the first google result.
I installed Android Studio, when I tried to install my first SDK from the SDK Management windows I got the error that I didn't have any SDK installed.
I tried to look on the internet to manually download the .zip,manualy create the folder, no luck what so ever.
When I tried to run the Android Studio as an administrator it detected I didn't have any SDK and prompt me right away at startup to download a SDK.

Do following steps
a) Change minSdkVersion and sync gradle
b) Revert back your minSdkVersion and sync gradle again
It will be resolved.

These days, Android Studio setup do not provide SDK as the part of original package.
In the context of windows, when you start Android Studio 1.3.1, you see the error message saying no sdk found. You just have to proceed and provide the path where sdk can be downloaded. And you are done.

Here is the solution just copy your SDK Manager.exe file at the root folder of your android studio's installation, Sync your project and cheers... here is the link for details.
running Android Studio on Windows 7 fails, no Android SDK found

Try make New Project, and then choose same android version that you've installed sdk verions on "Target Android Device" dialog.
In my case, error message gone.

I had the same problem, Android Studio just could not identify the android-sdk folder. All I did was to uninstall and reinstall android studio, and this time it actually identified the folder. Hope it also works out for you.

Download android sdk through this sdk manager https://dl.google.com/android/repository/tools_r25.2.3-macosx.zip
(note this link is for mac)
open android studio, click next, open where it ask to add path where u downloaded sdk..... add it... click next, it will downloaad updates..... and it done

Right now, the last version of Android Studio bundled (Windows IDE bundle with SDK (64-bit)) with Android SDK is version 2.3.3:
https://developer.android.com/studio/archive.html#android-studio-2-3-3
which size is about 2GB.
You can use it and then upgrade to the latest version of Android Studio.

I am on Mac Os. In my case, my host file was black. I added following entries (these entries should be there by default, but they weren't).
##
# Host Database
#
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
##
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
After re-running android studio, it prompted the sdk download.

I fixed this bug changing the proxy configuration:
No proxy → Auto-detect proxy settings

Categories

Resources