Develop Reference

How to get Bluetooth Headset battery level?

I'm trying to build an app which gets battery level of currently connected Bluetooth headset. This app can be used on phones which don't have this functionality built-in.
While searching on stackoverflow, I found How to get Bluetooth Headset battery status in android this question. I got the currently connected Bluetooth headset using BluetoothProfile.HEADSET profile.
But in the device object of type BluetoothDevice I don't see any method or property to get battery level of Bluetooth Headset.
I can get the device name and isAudioConnected.

If question is about Bluetooth HFP feature: HF indicators feature is optional for the both sides. If the both sides support it, BluetoothHeadset will broadcast BluetoothHeadset.ACTION_HF_INDICATORS_VALUE_CHANGED with BluetoothHeadset.EXTRA_HF_INDICATORS_IND_ID equal 2 (Battery Level) and BluetoothHeadset.EXTRA_HF_INDICATORS_IND_VALUE with scope 0..100. Do not remember Android version were it was implemented, you should check it.
Also battery level can be implemented in device using vendor specific HFP AT commands (especially for old handsfree devices) and maybe BLE.

I found a solution, but it only works on android 8 and above
I took this code from here
Kotlin
fun getBatteryLevel(pairedDevice: BluetoothDevice?): Int {
return pairedDevice?.let { bluetoothDevice ->
(bluetoothDevice.javaClass.getMethod("getBatteryLevel"))
.invoke(pairedDevice) as Int
} ?: -1
}

The first thing to register BroadcastReciver by "android.bluetooth.device.action.BATTERY_LEVEL_CHANGED"
and you can receive this action by the broadcast receiver then get extra data by "android.bluetooth.device.extra.BATTERY_LEVEL"
and if you want to trigger this action, you need to reconnect your Bluetooth device or Bluetooth device battery level happened to change.
Good luck for you.

Connected AirPods Pro to OnePlus 5T with Android 9.
None of those registered events happen:
"android.bluetooth.device.action.BATTERY_LEVEL_CHANGED"
"android.bluetooth.headset.profile.action.AUDIO_STATE_CHANGED"
"android.bluetooth.headset.action.HF_INDICATORS_VALUE_CHANGED"

I am Able to achieve the handset battery Level in Java
try {
BluetoothDevice device = bluetoothAdapter.getRemoteDevice("Connected device ID");
java.lang.reflect.Method method;
method = device.getClass().getMethod("getBatteryLevel");
int value = (int) method.invoke(device);
result.success(value);
} catch (Exception ex) {
result.error("invalid_argument", "'deviceId' argument is required to be string", null);
break;
}

This is #Kirill Martyuk answer as an Extension variable
val BluetoothDevice.batteryLevel
get() = this.let { device ->
val method = device.javaClass.getMethod("getBatteryLevel")
method.invoke(device) as Int?
} ?: -1
Usage would be something like
val manager = context.getSystemService(Context.BLUETOOTH_SERVICE) as BluetoothManager?
val adapter = manager?.adapter
val devices = adapter?.bondedDevices.orEmpty()
devices.forEach { device ->
Log.d("DEVICE_NAME", device.name)
Log.d("CHARGE_LEVEL", device.batteryLevel.toString())
}

List the files on a MTP device

It seems that:
HANDLE hFind = FindFirstFile(L"mtp://phone/SDcard/music/, &ffd);
if (hFind != INVALID_HANDLE_VALUE)
{
do
{
//...
} while(FindNextFile(hFind, &ffd) != 0);
FindClose(hFind);
}
doesn't work for devices connected via MTP. Is there a WinAPI function for this?
More precisely: how to list all the filenames (+filesize and modification date) on a device connected to PC via MTP (such as Android phone), in C/C++?

startVoiceRecognition with bluetooth headset is not working

I need to use bluetooth headset with voice recognition, which almost works fine in some devices like S3, S4 and Samsung Grand. However, when I tried same on Nexus 7, I am getting
BluetoothHeadsetServiceJni : Failed to start voice recognition, status: 6
error when I am calling startVoiceRecognition() method. I am using the code from this SO page.
What are the possible reasons for this issue occur only in some devices? Is there any way to solve this issue?

Using shoe rat suggestion, modify the start method in the link and see if it will work.
public boolean start()
{
if (!mIsStarted)
{
mIsStarted = true;
if (Build.VERSION.SDK_INT < Build.VERSION_CODES.HONEYCOMB || "Nexus 7".equals(Build.MODEL)
{
mIsStarted = startBluetooth();
}
else
{
mIsStarted = startBluetooth11();
}
}
return mIsStarted;
}

I have been check as Narayan mentioned, I found BluetoothHeadset.STATE_AUDIO_CONNECTED does fire in nexus 7 as well some other ZTE devices, may be this is manufature fault or a that device does not support call and you are try to communicate via call_mode, I think there is only workaround to solve this issue

Nexus 7 does not support VoiceRecognition,becuase Nexus 7 does not support Bluetooth HFP(handsfreee profile) who contains VoiceRecognition.
You can find device Bluetooth info in https://www.bluetooth.org/tpg/listings.cfm.

How to connect to Bluetooth SPP using dot42?

After reading the dot42 comments and trolling Java examples I managed to setup a Bluetooth connection but fail to open the connection. I cannot determine the problem. I followed the docs step by step.
My target device is a HTC Explorer running on 2.3 Gingerbread. Here is my code.
//Target 2.3 (Gingerbread)
[assembly: Application("dot42Application1")]
[assembly: UsesPermission(Android.Manifest.Permission.BLUETOOTH)]
[assembly: UsesPermission(Android.Manifest.Permission.BLUETOOTH_ADMIN)]
namespace dot42Application1
{
[Activity]
public class MainActivity : Activity
{
private TextView txStatus;
protected override void OnCreate(Bundle savedInstance)
{
base.OnCreate(savedInstance);
SetContentView(R.Layouts.MainLayout);
// Find UI controls
txStatus = FindViewById<TextView>(R.Ids.txStatus);
Intent enableIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
var bt = BluetoothAdapter.GetDefaultAdapter();
if (bt != null) //If device has not Bluetooth this will be null
{
if (bt.IsEnabled()) //Is Bluetooth device enabled?
{
var BT_My_Addr = bt.Address; //Get the devices MAC
var BT_Bonded = bt.GetBondedDevices().ToList(); //Get a list of bonded devices- I bonded to a BT2TTL Board earlier.
txStatus.Text = BT_My_Addr + System.Environment.NewLine; //Shows my MAC on screen.
string BT_Remote_Address = string.Empty;
foreach (var BTDevice in BT_Bonded) //Just searchging for string in bonded list
{
if (BTDevice.Name.Contains("linvor"))
{
BT_Remote_Address = BTDevice.Address;
}
}
//Gets remote device
var BT_Remote_Device = bt.GetRemoteDevice(BT_Remote_Address);
//Create a RFCOMM Socket to remote device using popular UUID ofr BT Serial boards
var BTsocket = BT_Remote_Device.CreateInsecureRfcommSocketToServiceRecord(Java.Util.UUID.FromString("00001101-0000-1000-8000-00805F9B34FB"));
//Call anyway to make sure there is no discvoerry in the backgorund. It slows stuff down.
bt.CancelDiscovery();
//Exception here? Dont know why :(
BTsocket.Connect();
//Suppsoed to dump 0 to 99999 to my listening serial device but I never get this far.
var BT_Out = BTsocket.GetOutputStream();
for (int i = 0; i < 99999; i++)
{
BT_Out.Write(Encoding.ASCII.GetBytes(i.ToString()));
}
}
else
{
txStatus.Text = "Bluetooth is disabled :(";
}
}
}
}
And this is what it shows after the socket creation
and the error...
What am I doing wrong? :(

I seem to have solved the problem by analysing various code snippets on the internet. I think the problem was trying to do everything in the OnCreate method. The steps I followed are the following:
Created a button on the main view (MainActivity.xml) and attached a onClick method.
Moved all the code OUT of the OnCreate method. (I think this allows the application to fully initialise.) Created an event handler for the button with two methods.
The two methods are the same as the code I posted in my original question. Just they are separated out and called when the user clicks the button.
findBT() Gets the default adapter. Checks if Bluetooth is enabled if not does the intent filter. Or if it is it will cycle through the bonded list and match a device name and store the BluetoohDevice in a variable. This is another thing that is different from my code. I do not use GetRemoteDevice I just assign the device from the BondedList to my global variable.
openBT() creates the RFCOMM socket (this did not work with unsecure - it threw an exception but using the secure method worked!)
You have to pair to the remote device using the Androids Bluetooth control panel. This code will not scan or connect to devices that are not paired. It will just throw null exceptions.
Also I left the target SDK 2.3.x but I am using the 4.x API.
-Disclosure. I am not a seasoned Android developer and just learning about the life cycle of Java applications in the Android context. I hope this can help other C# developers trying to do the same.

Can I turn on WiFi-Direct from code? on API-16 (Android 4.2.2)

I am developing an application with NFC and wifi direct. I get the MAC address using NFC and the Wifi Direct to transfer data. I call discoverpeers() and could get success. But there is no callback WIFI_P2P_PEERS_CHANGED_ACTION, the callback comes only when I go to settings and the select wifidirect.
This was discussed in the other question
Can I turn on WiFi-Direct from code? on Android API-14 (ICS)
"I'd like to add that WiFi direct on JB and above (at least on AOSP) is not active all the time - it only appears to be. If you look at listeners for WiFi direct, it turns itself off after some time. It turns itself back on if you open the wifi direct menu, however. You might have to have the host do a peer search or initialize itself in order to be able to be found. Likely a battery saving trick. I have also found that it's blocking, since as it accepts a connection, the entire system will lock up and fail to connect sometimes. (The system invitation) – Mgamerz "
Can anyone suggest the solution for the problem WIFI_P2P_PEERS_CHANGED_ACTION callback is not got and can get only when manually go to settings->wifi->tap on wifidirect
I used two devices Samsung galaxy nexus and nexus 7 both running on 4.2.2

There is no available API to enable wifiP2P but you can invoke method "enableP2p" from android settings 4.0.1
WifiP2pManager manager = (WifiP2pManager) getActivity().getSystemService(Context.WIFI_P2P_SERVICE);
Channel channel = manager.initialize(getActivity(), getActivity().getMainLooper(), null);
try {
Method method1 = manager.getClass().getMethod("enableP2p", Channel.class);
method1.invoke(manager, channel);
//Toast.makeText(getActivity(), "method found",
// Toast.LENGTH_SHORT).show();
} catch (Exception e) {
//Toast.makeText(getActivity(), "method did not found",
// Toast.LENGTH_SHORT).show();
}
To disable wifiP2P use this method
Method method1 = manager.getClass().getMethod("disableP2p", Channel.class);

Not from code. The user has to. That's why the demo has the link to wifi settings in the action bar.
When you call manager.discoverPeers(channel, new WifiP2pManager.ActionListener()
define onFailure and look at the reasonCode. If it's 0, then either the Wifi or WiFi direct is off.
If you look at the WiFi Direct demo app, the WifiDirectBroadcast Reciever, this piece of code looks at whether p2p is enabled specifically
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if (WifiP2pManager.WIFI_P2P_STATE_CHANGED_ACTION.equals(action)) {
// UI update to indicate wifi p2p status.
int state = intent.getIntExtra(WifiP2pManager.EXTRA_WIFI_STATE, -1);
if (state == WifiP2pManager.WIFI_P2P_STATE_ENABLED) {
// Wifi Direct mode is enabled
activity.setIsWifiP2pEnabled(true);
} else {
activity.setIsWifiP2pEnabled(false);
activity.resetData();
}
Then when discover peers is called it looks at the variable set by setIsWifiP2pEnabled

thanks user3093354. to continue with your solution, in order to disable the p2p you have to invoke:
Method method1 = manager.getClass().getMethod("disableP2p", Channel.class);

//Try this it may be help you
WifiManager wifiManager = (WifiManager)this.getSystemService(this.WIFI_SERVICE);
wifiManager.setWifiEnabled(true); //True - to enable WIFI connectivity .
//False -disable WIFI connectivity.
//add this permissions in Manifest file :
<uses-permission android:name="android.permission.CHANGE_WIFI_STATE"/>
<uses-permission android:name="android.permission.ACCESS_WIFI_STATE"/>
<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.CHANGE_NETWORK_STATE"/>

You can load the wifi driver from a command prompt with the desired concurrency level if you are rooted:
/system/bin/insmod /system/lib/modules/wlan.ko con_mode=3
These are the values:
typedef enum
{
VOS_STA_MODE=0,
VOS_STA_SAP_MODE=1,
VOS_P2P_CLIENT_MODE,
VOS_P2P_GO_MODE,
VOS_MONITOR_MODE,
VOS_FTM_MODE = 5,
VOS_IBSS_MODE,
VOS_P2P_DEVICE_MODE,
VOS_MAX_NO_OF_MODE
} tVOS_CON_MODE;
This is for an Atheros card.