Use case:
I need to draw hundred lines and a few pieces of text on my view. I need to give a scrolling effect, for which I capture the ACTION_MOVE event and redraw all the lines with the updated points. To get the desire result I tried with different approaches but none works as intended.
Approach 1
I made a custom class which extends View. All the drawing and calculation is done directly in my onDraw() method. Since there is so much of operation done in onDraw() method, the performance of the app is very poor. I even checked the performance using Profile GPU rendering and I can see the lines are very tall.
Approach 2
I created a Bitmap and after drawing all the lines onto my bitmap in another thread, I used postInvalidate() to draw the bitmap in onDraw() method:
mBufferedBitmap = Bitmap.createBitmap(getWidth(), getHeight(), Bitmap.Config.ARGB_8888);
mBufferedBitmap.eraseColor(Color.TRANSPARENT);
Canvas mBufferedCanvas = new Canvas(mBufferedBitmap);
drawLines(mBufferedCanvas)
postInvalidate();
Since I erase all the previous drawing on the bitmap and draw new lines with updated points, there is a flickering on the screen.
Approach 3
I tried extending my custom class to SurfaceView and performing all the operations on canvas object in another thread. But since SurfaceView uses CPU for drawing operations, the performance will be poor in low configuration mobiles.
Can anyone guide me how to achieve this task with better performance?
It is possible to use your approach 1 to achieve good performance.
An example that sounds close to your use case (drawing lines, a little text and having these update on gesture movement) is MPAndroidChart. This is an open source library that achieves high performance (see the following comparison if you want stats)
The classes to examine are the Renderer classes as these contain code draw in the onDraw(Canvas c) of the chart subtypes. You can see some of the tricks used to achieve high performance there:
Don't allocate in a render loop. Instead, allocate outside the loop and reuse/recycle variables. See LineChartRenderer line 199
Use buffering. For example, in MPAndroidChart, the points for the four corners of the bars in the bar chart are buffered and the buffer array is reused. See the BarBuffer class.
Use the native Canvas drawing functions (drawPath, drawLine etc.)
A complete list of tips for optimising rendering can be found in the Android Performance Slow Rendering Guide
Approach 2 is the best one. If you see flickering, it means that the bitmap is drawn to screen after you erase it and before you draw all the lines. If this is the case use another bitmap and do double buffering:
ScreenBitmap is what is drawn to screen
OffScreenBitmap is used for drawing in background.
Draw all your lines and text to OffScreenBitmap, and once finished, copy it to ScreenBitmap.
in onDraw, draw the ScreenBitmap.
Create these bitmaps once (typically in onSizeChanged), so that there is no alloocation in onDraw
Related
I'm trying to incrementally draw a waveform on a canvas in a separate thread, i.e. in each loop of the thread draw only the portion recently acquired by the hardware without redrawing the whole curve.
I am not sure if I can rely on the canvas' contents retained between SurfaceHolder.unlockCanvasAndPost and SurfaceHolder.lockCanvas.
The documentation seems to be a bit ambiguous on that and my experiments give surprising results: the "old" contents is different for the canvas returned in two subsequent loops of the drawing thread. It looks as if two canvases were used alternately (but I checked - it is the same canvas but with different contents).
The simplest way which I found to reproduce this behaviour:
Import the LunarLander sample applicaton.
In the LunarView.run method insert sleep(500) instruction in the loop.
In the LunarView.doDraw method comment out the line:
canvas.drawBitmap(mBackgroundImage, 0, 0, null);, which erases the old contents.
Run the game and let the ship crash. You will see the intermediate positions of the ship but they will blink: odd and even positions will be shown alternately.
So, my question is: can we draw pictures adding changes only to the contents which has been drawn before and if so - is there any documented way of dealing with the strange behaviour described above?
The lunar landing does not cache.
It draws the background image each time (refreshing) and then draws the spaceship.
private void doDraw(Canvas canvas) {
// Draw the background image. Operations on the Canvas accumulate
// so this is like clearing the screen.
canvas.drawBitmap(mBackgroundImage, 0, 0, null);
Check your If clauses closesly. Maybe one is alternating true and false. This would cause things to draw and then not draw, in rapid succession.
Use Log if need be to output your booleans, to see if one is changing.
Failing this, this the following gaming loop instead.
http://blorb.tumblr.com/post/236799414/simple-java-android-game-loop
I have made my own canvas class which extends an imageView. My onDraw() method draws out the users gps position and I keep calling this onDraw method every time the user moves. My problem is I also want to draw out a gps trail which only needs to be drawn once (doesnt need to be updated when a user moves). I am wondering is it possible to have more than 1 onDraw method or is there any way of separating 1) the user location and 2) the gps trail??
My reason is I do not want to waste memory by redrawing the gps route everytime the users gps position changes. It is a waste.
Have you seen performance take a hit? If not, don't worry about it. I would think that this would be wasting CPU cycles if anything... not memory. So if the app seems fast enough already, don't worry about optimizing it.
If your app is a bit laggy, and you've found that the trail is the bottleneck... I would suggest caching it into a bitmap. This way, you will still have to draw the trail, but you will not have to calculate the coordinates of the trail on each frame.
I have had to solve a somewhat similar problem recently and I'll explain briefly what I did in case it's of any help.
What you can do is use multiple overlapping Views, where one may contain the background graphics that you don't want to redraw often, and a foreground View that contains the graphics that are frequently updated. Then, to gain performance, you can design the background View's onDraw() so that it is backed by a Bitmap that you then retain as a class variable. In the very first onDraw() of your background graphics, you do the relatively slow drawing to Canvas. In subsequent calls to onDraw(), you simply draw that Bitmap to Canvas.
I've just done this myself. Basically what my application does is display a number of graphical gauges. Those gauges have lots of graphics that are drawn just once (gauge face, number legends), and the pointer graphic that needs to be redrawn over and over as the model data changes. First of all, I split the background graphics and moving foreground graphics into separate overlapping Views. Now, invalidating and redrawing the foreground pointer graphic of course causes anything it overlaps to be invalidated too, so the onDraw() method for the background graphics View is being called each time the pointer View is redrawn. The background View only needs to draw the background graphics once, but retains the Bitmap that backs the canvas, and in subsequent onDraw() calls it draws this bitmap back to Canvas (which is a lot faster than initially creating the graphics using Path() objects).
Bitmap bm;
....
protected void onDraw(Canvas canvas){
if(null==bm){
bm=Bitmap.createBitmap(getMeasuredWidth(),getMeasuredHeight(),Bitmap.Config.ARGB_8888);
// do your slow vector graphics drawing to Canvas here
}
Paint drawPaint = new Paint();
drawPaint.setAntiAlias(false);
drawPaint.setFilterBitmap(false);
drawPaint.setDither(false);
canvas.drawBitmap(bm, 0, 0, drawPaint);
}
Well, there can't be more than 1 onDraw method, assuming that I understood your question correctly. You will need to think about alternate approaches about how to handle this.
#DeeV suggested, that can be a solution for you.
I have a drawing app where the user can draw lines with their finger, adjust the color, thickness, etc. As the user is drawing, I am converting the massed X/Y points from MotionEvent into SVG Paths, as well as creating Android Path's and then drawing the Android Path's to the screen via a Canvas, and committing the SVG Path's to the app's database.
I am following the model used in FingerPaint, in that the 'in progress' lines are drawn on the fly by repeated calls to invalidate() (and thus, onDraw()), and once the line is complete and a new line is started, the previous line(s) are drawn in onDraw() from the underlying Canvas Bitmap, with in progress lines again generating repeated re-draws.
This works fine in this application - until you start rotating the underlying Bitmap to compensate for device rotation, supporting the ability to 'zoom in' on the drawing surface and thus having to scale the underlying Bitmap, etc. So for example, with the device rotated and the drawing scaled in, when the user is drawing, we need to scale AND rotate our Bitmap in onDraw(), and this is absolutely crawling.
I've looked at a SurfaceView, but as this still uses the same Canvas mechanism, I'm not sure I'll see noticeable improvement... so my thoughts turn to OpenGL. I have read somewhere that OpenGL can do rotations and scaling essentially 'for free', and even seen rumors (third comment) that Canvas may be disappearing in future versions.
Essentially, I am a little stuck between the Canvas and OpenGL solutions... I have a 2D drawing app that seems to fit the Canvas model perfectly when in one state, as there are not constant re-draws going on like a game (for instance when the user is not drawing I don't need any re-drawing), but when the user IS drawing, I need the maximum performance necessary to do some increasingly complex things with the surface...
Would welcome any thoughts, pointers and suggestions.
OpenGL would be able to handle the rotations and scaling easily.
Honestly, you would probably need to learn a lot of OpenGL to do this, specifically related to the topics of:
Geometry
Lighting (or just disabling it)
Picking (selecting geometry to draw on it)
Pixel Maps
Texture Mapping
Mipmapping
Also, learning OpenGL for this might be overkill, and you would have to be pretty good at it to make it efficient.
Instead, I would recommend using the graphic components of a game library built on top of openGL, such as:
Cocos2d
libgdx
any of the engines listed here
Well, this question was asked 6 years ago. Maybe Android 4.0 has not come up?
Actually, after Android 4.0 the Canvas at android.view.View is a hardware accelerated canvas, which means it is implementd by OpenGL, so you do not need to use another way for performance.
You can see the https://github.com/ChillingVan/android-openGL-canvas/blob/master/canvasglsample/src/main/java/com/chillingvan/canvasglsample/comparePerformance/ComparePerformanceActivity.java to compare the performance of normal canvas in view with GLSurfaceView.
You are right that SurfaceView uses Canvas underneath the hood. The main difference is that SurfaceView uses another thread to do the actual drawing, which generally improves performance. It sounds like it would not help you a great deal, though.
You are correct that OpenGL can do rotations very quickly, so if you need more performance that is the way to go. You should probably use GLSurfaceView. The main drawback with using OpenGL is that it is a real pain to do text. Basically you have to (okay, don't have to, but seems to be the best option) render bitmaps of text.
I have a SurfaceView which is currently drawing a series of Bitmaps. These bitmaps can easily be manipulated geometrically (scale/rotate/translate/etc). An example would be a ball which is bouncing, which may just use translate/rotate operations. The ball is just a single bitmap.
I wish to replace this 'ball' Bitmap with a sequence of Bitmaps, for example if the ball were to explode in a flurry of fireworks, I have the individual frames and I wish to string them together.
Without having to manually cycle through them on each onDraw() call in my SurfaceView, how can I go about this? I know in normal conditions I can just make an AnimationDrawable using the frames in an XML file, bind it to an ImageView (set as background) then call it. However, I am using a SurfaceView for displaying all my graphics on screen, not ImageViews. I have read you can overlay other views on top of SurfaceViews, but I am unsure that I could get the exact position required. For example, the ball may explode at X=65 Y=21 on my SurfaceView, how could I translate this exact co-ordinate to my ImageView?
Any help or tips on alternative methods would be greatly appreciated.
If you want to keep it more separated, you can create another class that handles this animation and keeps track of which frame it's on and the bitmaps to use then delegate drawing of the sprite to this class in your SurfaceView's onDraw.
I want to draw something at about 30 frames per seconds on Android Canvas or other convenient object for this purpose. In my application different graphic objects are drawn and if any of the graphic object is touched, the graphic object changes its shape. I looked at the
onDraw(Canvas canvas) callback of View subclass but calling invalidate() does not help here: first I cannot control the frame rate and second if the objects are moving too fast, the motion appears jerky.
I personally dislike Android's built-in Animation classes, so I tend to do all animations with Canvas by hand. I have found the most luck with creating a list of the images you want to use in your animation and then an int variable to store the current "frame" you are on. To advance the frame, I create a thread that sleeps for, say, 30 ms and then update the frame variable accordingly. Then in whatever update handler you are using, you can just create a switch statement or something of the like, and draw the respective frame.
It may seem like a lot of work, but it really isn't. Shove it all into a class and you will love yourself for many animations to come.