I am using Windows 10 (64 bit) and Android Studio 2.3.
My Android emulator is located in folder:
d:\Programs\Android\avd.android\avd\Nexus_4_4.avd\
Suppose I'm in folder D:\temp.
How from folder D:\temp I can launch my emulator (from command line of pc)?
Open command prompt anywhere and use the following command
To get the list of available emulator
emulator -list-avds
To open a emulator
emulator -avd Nexus_5X_API_23
I could only successfully run the command from the tools folder (Windows 10):
cd %ANDROID_HOME%/tools
To get the list of available virtual devices:
emulator -list-avds
To run it:
emulator -avd Nexus_5X_API_24
You can then put this at a .bat file:
cd %ANDROID_HOME%/tools
emulator -avd YOUR_VIRTUAL_DEVICE_ID
Step for :
Copy this cd C:\Users{User}\AppData\Local\Android\Sdk\emulator from your system
Paste this on System Variable Path Setting.
List available emulators: emulator -list-avds
Start the emulator: emulator -avd {myEmulator}
None of the above answers helped me on a windows 10 machine. This is what a window user needs to do:
Go to the emulator folder: cd C:\Users\{User}\AppData\Local\Android\Sdk\emulator
List available emulators: emulator -list-avds
Start the emulator: emulator -avd {myEmulator}
For WINDOWS only
1. first step to locate your AppData in your user folder if its hidden then in file-mangaer navigate to view-hidden items(check mark)
cd C:\Users\UserName\AppData\Local\android\sdk\emulator
2. second step is to see avd(android virtual devices) available
emulator -list-avds
3. Third steo is to launch avd
emulator -avd Pixel_2_API_29
Run the following command in cmd:
Cd C:\Users\Username\Appdata\local\Android\Sdk\Emulator
.\emulator -avd Andro (Emulator Name)
You can make a shortcut by using a bat file.
Step 1 - Save the Path C:\Users\Username\AppData\Local\Android\Sdk\emulator in Environment variable.
Step 2 - Then make a .bat file and write the command
emaulator -avd (Emaulator Name)
For Windows Users:
Open CMD Then
First Locate your emulator folder directory
cd c:\Users\<Your name>\AppData\Local\Android\Sdk\tools
emulator.exe -list-avds
emulator.exe -avd emulator-name or emulator-Id
That's It. you are done.
For Mac users, open Terminal and run below commands -
Navigate to the emulator folder directory(where SDK is installed). In my case -
$ cd /Users/username/Library/Android/sdk/emulator
Then check for available emulators -
$ ./emulator -list-avds
And finally -
$ ./emulator -avd **nameofthedevice** -netdelay none -netspeed full
Simple steps i followed :
cd ~/Library/Android/sdk/tools/
./emulator -list-avds
Pick one of your available emulator name and run ./emulator -avd Nexus_5X_API_24
Emulator can also be opened from here
Open the location C:\Users{User_Name}\AppData\Local\Android\Sdk\tools
Now, open cmd from the current location.
Type the command emulator.exe -avd {NameOfYourEmulator}
This worked for me in Windows 10.
To know the list of emulators. Use the command
emulator -list-avds
Copy emulator.exe file location and paste that in global environment variable to access globaly in your system above all may be worked before but in 2020 emulator.exe is in diffrent folder
C:\Users{username}\AppData\Local\Android\emulator
for me it was
C:\Users\sachin\AppData\Local\Android\emulator
2.simply run in terminal
emulator -list-avds
emulator -avd {emulator name}
Try this way, it's Fast and no need append to syspath:
Run "Run" Win+R and put
cmd /K "cd C:\Users\{username}\AppData\Local\Android\Sdk\emulator&&emulator #{device_name}"
change {username} to your username and {device_name} to your device name
1. first step to locate your AppData in your user folder if its hidden then in file-mangaer navigate to view-hidden items(check mark)
cd C:\Users\UserName\AppData\Local\android\sdk\emulator
2. second step is to see avd(android virtual devices) available
emulator -list-avds
3. Third steo is to launch avd
emulator -avd Pixel_2_API_29
So, the issue i correctly installed eclipse,android sdk,ndk, coocs2d-x 2.1.4. I can build cocos2d-x android project, import it to eclipse, etc. Everything seems fine, but not really. The problem is that i can't launch my virtual machine to emulate andoid OS. I created avd, it works fine with simple android projects, but when i use it to run cocos2d-x project as android application it does nothing. No output at all. I found this guide and followed it. But i faced a problem. 1st of all, when i follow this step:
Now start the Android for x86 Intel Emulator using the following command:
$ <SDK directory>/tools/emulator-x86 -avd Your_AVD_Name -qemu -m 2047 -enable-kvm
i have an error message:
gloomist-CN tools # ./emulator-x86 #myavd -qemu -m 2047 -enable-kvm
emulator: ERROR: unknown virtual device name: 'myavd'
emulator: could not find virtual device named 'myavd'
But it is in sdk as a valid android virtual device. And the next one. In that tutorial that i pasted link to above, the last step is:
Run the emulator with the correct library path and options
Make sure to
Set the library path to the directory containing the Open GL library for the emulator (LD_LIBRARY_PATH=...)
Run the x86 version of the emulator (run /tools/emulator-x86)
Enable GPU use (Use the option "-gpu on")
Also, you need to specify the name of the Android Virtual Device to use (Use the option "-avd ")
On OS X the command line looks like this
LD_LIBRARY_PATH=~/bin/android-sdk/tools/lib ~/bin/android-sdk/tools/emulator-x86 -verbose -avd android17x86 -gpu on
i don't really know what author meant by all this. Could anyone explain me the way to do it in linux?
So basically, the main problem is: how to run a cocos2d-x project on AVD in eclipse on lixnux? That's it.
I use Linux version 3.2.0-23-generic (buildd#palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14).
Can anyone help me to figure out how can i accurately launch my cocos2d-x project on AVD using eclipse?
Are you sure 'myavd' is a valid avd?
Try to run this command to get a list of AVD's you have created in your system:
# <SDK directory>/tools/android list avd
And re-run emulator-x86 passing a valid avd.
I also suggest you follow the step by step guide about how to configure your android enviroment which comes with cocos2d-x dist. You can find it in: /samples/Cpp/TestCpp/proj.android/README.md
Hope this helps
I was able to fix this error on Ubuntu 18.04 by running:
sudo chmod 777 /dev/kvm
Its not exactly high security, but it gets the job done.
I'm on Mac, working on Android development from the terminal. I have successfully created the HelloWorld project and now I'm trying to run it from the command line in the Android emulator. Which command runs the emulator for my HelloWorld project?
I already have the Android tools and platform-tools in my PATH.
Edit:
How do I tell the emulator to run my HelloWorld project from the command line? I've already built the project with ant.
I assume that you have built your project and just need to launch it, but you don't have any AVDs created and have to use command line for all the actions. You have to do the following.
Create a new virtual device (AVD) for the platform you need. If you have to use command line for creating your AVD, you can call android create avd -n <name> -t <targetID> where targetID is the API level you need. If you can use GUI, just type in android avd and it will launch the manager, where you can do the same. You can read more about AVD management through GUI and through command line.
Run the AVD either by using command emulator -avd <name> or through previously launched GUI. Wait until the emulator fully loads, it takes some time. You can read about additional options here.
Now you have to install the application to your AVD. Usually during development you just use the same Ant script you used to build the project, just select install target. However, you can install the application manually using command adb install <path-to-your-APK>.
Now switch to emulator and launch your application like on any normal device, through the launcher. Or, as an alternative, you can use the following command: adb shell am start -a android.intent.action.MAIN -n <package>/<activity class>. For example: adb shell am start -a android.intent.action.MAIN -n org.sample.helloworld/org.sample.helloworld.HelloWorld. As a commenter suggested, you can also replace org.sample.helloworld.HelloWorld in the line above with just .HelloWorld, and it will work too.
List all your emulators:
emulator -list-avds
Run one of the listed emulators with -avd flag:
emulator -avd name-of-your-emulator
where the emulator executable is under:
${ANDROID_SDK}/tools/emulator
Or, for newer SDKs, try:
cd ${ANDROID_HOME}/emulator
emulator -avd name-of-your-emulator
I think the best way to reach it via terminal is :
cd ~/Library/Android/sdk/emulator
Or for Windows:
cd %userProfile%\AppData\Local\Android\sdk\emulator
To run a certain AVD directly:
./emulator -avd {AVD_NAME}
To list your AVDs use :
./emulator -list-avds
Just to add here, whenever you get "error: device offline" means that connection with emulator & adb bridge has been broken due to time taken in emulator startup.
Rather than re-starting emulator at this point try below two commands which stops & start adb bridge again.
adb kill-server
adb start-server
Here you can check the options to execute this command via command-line:
emulator -avd avd_name [-option [value]] ... [-qemu args]
For example, I use it like this below:
emulator -avd ICS_ARM -wipe-data -no-boot-anim -cpu-delay 0
open CMD
Open Command Prompt
type the path of emulator in my case
C:\adt-bundle-windows-x86_64-20140702\sdk\tools
write "emulator -avd emulatorname" in my case
emulator -avd AdilVD
If you are strictly trying to run the emulator from the command line try this in OSX.
"/Applications/Android Studio.app/sdk/tools/emulator" -avd <NAMEOFDEVICE> -netspeed full -netdelay none
You can simplify it by adding an alias to the .bash_profile, and sending it to a background job.
alias android='/Applications/Android\ Studio.app/sdk/tools/emulator <NAMEOFDEVICE> -netspeed full -netdelay none &'
Let Bash know about the changes.
source ~/.bash_profile
Instructions for Mac with zsh:
Open terminal window (CTRL+ALT+T)
Run command
nano ~/.zshrc
to edit your profile
Add following lines in the opened file:
export ANDROID_SDK_HOME="~/Library/Android/Sdk"
alias emulator="$ANDROID_SDK_HOME/emulator/emulator"
Save the file (CTRL+O, CTRL+X)
Source the profile by running command source ~/.zshrc or just log out and log back in
Test by running the command:
emulator -help or emulator -list-avds
to show your simulator in terminal
and run Android emulator with command:
emulator -avd <name>
NOTE: Should be same for bash by replacing .zshrc with .bashrc
Open command prompt and go to <android-Home>\sdk\tools>emulator -avd <AVD_NAME>
Here "emulator" is the command used to open your Android Virtual Device.
If you have Git Bash you can open your emulator with a double-click, with some initial setup (tested in Windows 10 only):
Open Git Bash.
Run cd ~/AppData/Local/Android/sdk/emulator
Run ./emulator -list-avds and keep note of the emulator's name. MY_EMULATOR for example.
Open Notepad and add these two lines (insert your emulator's name instead of MY_EMULATOR):
cd ~/AppData/Local/Android/sdk/emulator; ./emulator -avd MY_EMULATOR
Save the file somewhere convinient as myfile.sh. You can change "myfile" as suits you best, but the extension .sh is needed.
Open Git Bash at the directory where you stored myfile.sh and run chmod +x myfile.sh. Remember to put your file's name instead of myfile.
And that's it! From now on, everytime you need to start that emulator, just locate your myfile.sh and double click on it and wait for your Android emulator to launch!
To list all the devices installed: emulator -list-avds
This will list all the devices installed inside your Android Studio.
To run emulator: emulator -avd device_name
For example, if you got Pixel_3a_API_30_x86 after running the command in option 1, then your command to run emulator will be: emulator -avd Pixel_3a_API_30_x86
The android create avd command is deprecated. It's now recommended to use avdmanager instead to launch emulators from the command line.
First, create a new emulator if one doesn't already exist:
avdmanager create avd --name "MyEmulator" -k "system-images;android-
26;google_apis;x86"
This assumes that you already have an X86 system image installed that matches API 26, and has the Google APIs installed.
You can then launch the emulator with emulator #MyEmulator.
Open CMD
To get all Emulator list (C:\Users\DJango\AppData\Local\Android\sdk\emulator>emulator -list-avds)
Choose any emulator
(C:\Users\DJango\AppData\Local\Android\sdk\emulator>emulator -avd Pixel_2_API_28)
(Linux)
In you terminal Copy & Paste and changing the three fields in blue
/home/YouUser/Folder/adt-bundle-linux-x86_64-20140702/sdk/tools/emulator64-x86 -avd Android5.1.1
YouUser = user of session in linux
Folder = path of folfer
Android5.1.1 = You version of android in the emulator,for example (Android4.4.2)
you can view the emulators in you folder home
cd /home/Youuser/.android/avd/
Nowadays asuming you have Android Studio installed (2.2) in my case and just 1 emulator you might use this one liner
export ANDROID_SDK_ROOT=~/Library/Android/sdk/ && emulator '#'`emulator -list-avds`
If you do this often, make it easier:
$ echo 'export ANDROID_SDK_ROOT=~/Library/Android/sdk/' >> ~/.profile
Add an alias to ~.aliases
alias androidup="emulator '#'`emulator -list-avds`"
Recall to source ~/.profile ~/.aliases before testing it
Next time just $ androidup
Go to the directory where emulator is located
${ANDROID_SDK}/tools/emulator
Check emulator list from CLI
emulator -list-avds
Run a AVD from the list
emulator -avd {avd_name}
list of avd name available on
.android/avd
/SDK_PATH/tools/emulator -netdelay none -netspeed full -avd
"AVD_NAME"
In windows, I use this PowerShell script to start it up.
$em = $env:USERPROFILE+"\AppData\Local\Android\sdk\tools\emulator.exe";
Start-Process $em " -avd Nexus_5X_API_24" -WindowStyle Hidden;
For automation (CI) we did something like below steps:
Frist, find SDK's tools location, and store in variable for later use.
tools=$ANDROID_HOME/cmdline-tools/latest/bin
arch="x86_64"
package="system-images;android-23;google_apis;$arch"
Ensure Android-image's downloaded.
$tools/sdkmanager "$package"
Accept the licenses.
echo yes | $tools/sdkmanager --licenses
Create AVD.
echo no | $tools/avdmanager create avd --force --name MyAVD --abi google_apis/$arch --package "$package"
Says "no" to "Do you wish to create a custom hardware profile? ..."
Launch emulator parallel.
$ANDROID_HOME/emulator/emulator -netdelay none -netspeed full -no-snapshot-load -no-snapshot -avd MyAVD > /dev/null &
Build APK.
./gradlew assembleDebug
At last, Android-tests (Instrumented tests) automatically detect and run on Emulator.
./gradlew connectedAndroidTest
Note that because we launch Emulator parallel, you need to wait until Emulator is ready, and that before Step #7.
Maybe count build-time with script, and if build takes less than what Emulator-launch takes, call sleep.
I am late, here but want to share so may be it help some one and me too when ever needed later :) ,
So below is the way to open emulator from command line with one command using bash script.
I am using MX Linux but process is same on all operating systems
1- First Check the installed emulators
emulator -list-avds
it will result like below
emulator -list-avds
Nexus_4_API_28
Pixel_2_API_28
2- open any plain text or code editor and create a new file and write as below
#!/bin/sh
emulator -avd Nexus_4_API_28
Nexus_4_API_28 is the emulator that i want to open you write yours which you got from first step
save this file with .sh extension
3- Then, change the permissions on the file to make it executable:
chmod u+x emu.sh
4- Now open the emulator just executing this bash script file with following command
./emu.sh
For one-click (BATCH file) launch, this is what I've done:
got the name of AVD from Android Studio -> Tools -> AVD Manager -> Click on Arrow Down and choose View Details ( for me it's Pixel_2_API_28, so change accordingly below)
create an start.bat file and put the following inside:
c:
cd C:\Program Files (x86)\Android\android-sdk\emulator\
emulator -avd Pixel_2_API_28
Explanations:
First line: for me was necessary because I am launching it from d:
Second line: for me was not working the tools\emulator
Third line:
make sure you change the name of the AVD with yours (here
Pixel_2_API_28)
Using:
launch start.bat from command line
easily type this command in cmd.
replace after Users\ your user name \
if you don't have this file reinstall android studio.
On Mac (and Linux I think), after you have created your AVD, you can make an alias:
alias run-android='~/Library/Android/sdk/tools/emulator -avd ${YOUR_AVD_NAME} &'
Note: the execution of the alias will not lock your terminal, if you want that, just remove the last '&'.
Run emulator it self will give you an error because he expect that, in your current position, you have: /emulator/qemu/${YOUR_PATFORM}/qemu-system-x86_64' to start the emulator.
I wrote this simple shell script using Zenity that lets you pick which avd you want to run. If you don't have ANDROID_HOME defined, you can just replace that with the full path to emulator.
This would be easy to do with select instead of Zenity also, but I opted for Zenity since I'm running it from the xfce-application menu (though a .desktop-file).
#!/bin/sh
opt=$(zenity --title="Choose AVD" --text="Choose which emulator to start" --list \
--column="Devices" --separator="\n" `$ANDROID_HOME/emulator/emulator -list-avds`);
$ANDROID_HOME/emulator/emulator -avd $opt
Run the first emulator available:
~/Library/Android/sdk/tools/emulator -avd `~/Library/Android/sdk/tools/emulator -list-avds | awk '{print $1}'`
A launcher script which lists existing AVDs and lets you pick the one you want. Requires python3 (at least v3.4) and a valid environment variable ANDROID_HOME or ANDROID_SDK pointing to the Android SDK dir.
#!/usr/bin/env python3
import os
import subprocess
from pathlib import Path
android_emulator_dir: Path = Path(os.environ['ANDROID_HOME'] or os.environ['ANDROID_SDK']) / 'emulator'
if android_emulator_dir.exists():
emulator_dir = android_emulator_dir.absolute()
print(f'SDK emulator dir: {emulator_dir}', end='\n\n')
proc = subprocess.Popen(['./emulator', '-list-avds'], stdout=subprocess.PIPE, cwd=emulator_dir, text=True)
avds = {idx: avd_name.strip() for idx, avd_name in enumerate(proc.stdout, start=1)}
print('\n'.join([f'{idx}: {avd_name}' for idx, avd_name in avds.items()]))
avd_idx = input("\nType AVD index and press Enter... ")
avd_name = avds.get(int(avd_idx))
if avd_name:
subprocess.Popen(['./emulator', '-avd', avd_name, '-no-boot-anim'], cwd=emulator_dir)
else:
print('Invalid AVD index')
else:
print(f'Either $ANDROID_HOME or $ANDROID_SDK must be defined!')
AppleScript version (MacOS only)
osascript -e '
set avds to paragraphs of (do shell script "~/Library/Android/sdk/emulator/emulator -list-avds")
set avd to (choose from list avds with prompt "Please select an AVD to start" default items "None" OK button name {"Start"} cancel button name {"Cancel"})
do shell script "~/Library/Android/sdk/emulator/emulator -avd " & avd & " -no-boot-anim > /dev/null 2>&1 &"
'
The script above can also be run from the Script Editor.app or from Automator.app (the bit between the single quotes). Also you can use Script Editor to save it as a native macos app: select File on the menu, press and hold the ⌥ (Option) key, select Save As and then select File Format: Application.
windows 10 what helped me:
1 cd C:\Users\xxx\AppData\Local\Android\Sdk\emulator
2 list all the available: emulator -list-avds
3 start as NON-GUI mode: emulator -avd Pixel_3a_API_30_x86 -no-window
For Windows:
Search Environment in Windows Search Bar and choose "Edit the System Environment Variable"
In the System Properties window, click on Environment Variable and specify the value of the PATH environment variable:
C:\Users\{USER}\AppData\Local\Android\Sdk\emulator.
Now open CMD or Powershell and type:
emulator -list-avds
This will show list of all AVDs.
To run specific AVD, type in CMD/Powershell: emulator -avd {EmulatorName}
If you have added correct path of the android emulator, AVD will open.
If you already have emulator and wanted to use that using command just use this 1 line code only
cd C:\Users\yourUserName\AppData\Local\Android\Sdk\emulator | ./emulator -avd Pixel_5_API_32
Thanks me Later...
Starting emulator from command line with dns help
Emulator program location : /Users/{{UserName}}/Library/Android/sdk/tools
Check existing avd :-
emulator -list-avds
Start emulator with dns set
/Users/{{UserName}}/Library/Android/sdk/tools/emulator -avd Pixel_API_26 -dns-server 8.8.8.8