I have columns of checkboxes, the top row of which are CheckAll checkboxes for that particular column. If I uncheck the Checkall from the first CheckAll checkbox in the leftmost column I would like to uncheck the remaining CheckAll checkboxes.
However the mycheckbox.setSelected(false) has no effect. If however, I do a mycheckbox.setEnabled(false) (just as a test) it DOES work and the checkbox is disabled.
By the way, this is a "header row" for a listview with a custom adapter. The contents of the listview work as expected.
Any idea how to get the checkbox unchecked?
You should use mycheckbox.setChecked(false) instead of setSelected.
I've tried searching for setSelected to see what it does, but in official documentation of the CheckBox, I was not able to find it (which suggested to me that this method is probably found in one of the parent classes of CheckBox). Tried typing it in Android Studio:
CheckBox cb = new CheckBox(getApplication());
cb.setSelected(true);
Went to the implementation of the method (CTRL+Click) and saw this in the TextView class, from which almost every other widget is derived:
#Override
public void setSelected(boolean selected) {
boolean wasSelected = isSelected();
super.setSelected(selected);
if (selected != wasSelected && mEllipsize == TextUtils.TruncateAt.MARQUEE) {
if (selected) {
startMarquee();
} else {
stopMarquee();
}
}
}
Interesting thing to note here is that setChecked method is contained in the CompoundButton class, while setSelected is is TextView. That means that setSelected does something completely different because textView surely cannot be checked/unchecked.
I hope this explains it well.
Basically I have a chart with four different series, that by default shows all four of them at the same time. I want to allow the user to hide and/or show them again as he pleases by marking checkboxes.
I found a similar question here and followed both the advices given, but it didn't work. Here is what one of my checkboxes looks like now:
checkBox1.setOnClickListener(new OnClickListener() {
#Override
public void onClick(View v) {
if(((CheckBox)v).isChecked()){
multiRenderer.addSeriesRenderer(distanceRenderer);
// distanceRenderer.setColor(Color.parseColor("#990000")); //(making transparent method)
}
else{
//distanceRenderer.setColor(Color.TRANSPARENT); //(making transparent method)
multiRenderer.removeSeriesRenderer(distanceRenderer);
}
}
});
The idea is to when I uncheck the checkbox, I will hide that one renderer, when I check it again, it will be added again.
In the suggestions of the thread I linked to, they said to remove all renderers and then reenter the ones that aren't supposed to be hidden. I also tried this, but to no avail. The third option was simply to change the color to transparent whenever I wanted it to disappear, this also didn't work.
I debugged it, and it is getting in the conditions correctly, but nothing happens. Is there something I need to call that I've missed?
Thanks!
Edit: I don't know if this somehow helps, but I also tried to call the XYMultipleSeriesDataset's function repaint(). This caused an IllegalStateException, soooo.... Still no good...
Try this for hide purpose :
r.setColor(Color.TRANSPARENT);
mChartView.repaint();
where r is XYSeriesRenderer .
It's taken me quite a while to get my head around the Android Spinner. After several failed implementation attempts, and after reading many questions partially similar to my own but without satisfactory answers, and some without any answers at all, e.g. here and here, I finally get that a "spinner" in Android isn't meant to be the same thing as a "drop-down list" from desktop apps, or a select in HTML. However, what my app (and I'm guessing the apps of all the other posters whose questions are similar) needs is something that works like a drop-down box, not like a spinner.
My two problems are with what I first considered to be idiosynchrasies the OnItemSelectedListener (I've seen these as separate questions on this site but not as one):
An initial selection of the first list item is triggered automatically without the user's interaction.
When the item that was already selected is selected again by the user, it is ignored.
Now I realise that, when you think about it, it makes sense for this to happen on a spinner - it has to start with a default value selected, and you spin it only to change that value, not to "re-select" a value - the documentation actually says: "This callback is invoked only when the newly selected position is different from the previously selected position". And I've seen answers suggesting that you set up a flag to ignore the first automatic selection - I guess I could live with that if there's no other way.
But since what I really want is a drop-down list which behaves as a drop-down list should (and as users can and should expect), what I need is something like a Spinner that behaves like a drop-down, like a combo-box. I don't care about any automatic pre-selection (that should happen without triggering my listener), and I want to know about every selection, even if it's the same one as previously (after all, the user selected the same item again).
So... is there something in Android that can do that, or some workaround to make a Spinner behave like a drop-down list? If there is a question like this one on this site that I haven't found, and which has a satisfactory answer, please let me know (in which case I sincerely apologise for repeating the question).
+1 to David's answer. However, here's an implementation suggestion that does not involve copy-pasting code from the source (which, by the way, looks exactly the same as David posted in 2.3 as well):
#Override
void setSelectionInt(int position, boolean animate) {
mOldSelectedPosition = INVALID_POSITION;
super.setSelectionInt(position, animate);
}
This way you'll trick the parent method into thinking it's a new position every time.
Alternatively, you could try setting the position to invalid when the spinner is clicked and setting it back in onNothingSelected. This is not as nice, because the user will not see what item is selected while the dialog is up.
Ok, I think I've come up with a solution for my own situation with the help of both David's and Felix' answer (I believe David's helped Felix', which in turn helped mine). I thought I'd post it here together with a code sample in case someone else finds this approach useful as well. It also solves both of my problems (both the unwanted automatic selection and the desired re-selection trigger).
What I've done is added a "please select" dummy item as the first item in my list (initially just to get around the automatic selection problem so that I could ignore when it was selected without user interaction), and then, when another item is selected and I've handled the selection, I simply reset the spinner to the dummy item (which gets ignored). Come to think of it, I should've thought of this long ago before deciding to post my question on this site, but things are always more obvious in hindsight... and I found that writing my question actually helped me to think about what I wanted to achieve.
Obviously, if having a dummy item doesn't fit your situation, this might not be the ideal solution for you, but since what I wanted was to trigger an action when the user selected a value (and having the value remain selected is not required in my specific case), this works just fine. I'll try to add a simplified code example (may not compile as is, I've ripped out a few bits from my working code and renamed things before pasting, but hopefully you'll get the idea) below.
First, the list activity (in my case) containing the spinner, let's call it MyListActivity:
public class MyListActivity extends ListActivity {
private Spinner mySpinner;
#Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
// TODO: other code as required...
mySpinner = (Spinner) findViewById(R.id.mySpinner);
mySpinner.setAdapter(new MySpinnerAdapter(this));
mySpinner.setOnItemSelectedListener(new OnItemSelectedListener() {
#Override
public void onItemSelected(AdapterView<?> aParentView,
View aView, int aPosition, long anId) {
if (aPosition == 0) {
Log.d(getClass().getName(), "Ignoring selection of dummy list item...");
} else {
Log.d(getClass().getName(), "Handling selection of actual list item...");
// TODO: insert code to handle selection
resetSelection();
}
}
#Override
public void onNothingSelected(AdapterView<?> anAdapterView) {
// do nothing
}
});
}
/**
* Reset the filter spinner selection to 0 - which is ignored in
* onItemSelected() - so that a subsequent selection of another item is
* triggered, regardless of whether it's the same item that was selected
* previously.
*/
protected void resetSelection() {
Log.d(getClass().getName(), "Resetting selection to 0 (i.e. 'please select' item).");
mySpinner.setSelection(0);
}
}
And the spinner adapter code could look something like this (could in fact be an inner class in the above list activity if you prefer):
public class MySpinnerAdapter extends BaseAdapter implements SpinnerAdapter {
private List<MyListItem> items; // replace MyListItem with your model object type
private Context context;
public MySpinnerAdapter(Context aContext) {
context = aContext;
items = new ArrayList<MyListItem>();
items.add(null); // add first dummy item - selection of this will be ignored
// TODO: add other items;
}
#Override
public int getCount() {
return items.size();
}
#Override
public Object getItem(int aPosition) {
return items.get(aPosition);
}
#Override
public long getItemId(int aPosition) {
return aPosition;
}
#Override
public View getView(int aPosition, View aView, ViewGroup aParent) {
TextView text = new TextView(context);
if (aPosition == 0) {
text.setText("-- Please select --"); // text for first dummy item
} else {
text.setText(items.get(aPosition).toString());
// or use whatever model attribute you'd like displayed instead of toString()
}
return text;
}
}
I guess (haven't tried this) the same effect could be achieved using setSelected(false) instead of setSelection(0), but re-setting to "please select" suits my purposes fine. And, "look, Ma, no flag!" (Although I guess ignoring 0 selections is not that dissimilar.)
Hopefully, this can help someone else out there with a similar use case. :-) For other use cases, Felix' answer may be more suitable (thanks Felix!).
Look. I don't know if this will help you, but since you seem tired of looking for an answer without much success, this idea may help you, who knows...
The Spinner class is derived from AbsSpinner. Inside this, there is this method:
void setSelectionInt(int position, boolean animate) {
if (position != mOldSelectedPosition) {
mBlockLayoutRequests = true;
int delta = position - mSelectedPosition;
setNextSelectedPositionInt(position);
layout(delta, animate);
mBlockLayoutRequests = false;
}
}
This is AFAIK taken from 1.5 source. Perhaps you could check that source, see how Spinner/AbsSpinner works, and maybe extend that class just enough to catch the proper method and not check if position != mOldSelectedPosition.
I mean... that's a huge "maybe" with a lot of "ifs" (android versioning comes to mind etc.), but since you seem frustrated (and I've been there with Android many times), maybe this can give you some "light". And I assume that there are no other obvious answers by looking at your previous research.
I wish you good luck!
Here is an alternative solution to differentiate between any (intended or unintended) programmatic and user-initiated changes:
Create your listener for the spinner as both an OnTouchListener and OnItemSelectedListener
public class SpinnerInteractionListener implements AdapterView.OnItemSelectedListener, View.OnTouchListener {
boolean userSelect = false;
#Override
public boolean onTouch(View v, MotionEvent event) {
userSelect = true;
return false;
}
#Override
public void onItemSelected(AdapterView<?> parent, View view, int pos, long id) {
if (userSelect) {
// Your selection handling code here
userSelect = false;
}
}
}
Add the listener to the spinner registering for both event types
SpinnerInteractionListener listener = new SpinnerInteractionListener();
mSpinnerView.setOnTouchListener(listener);
mSpinnerView.setOnItemSelectedListener(listener);
This wouldn't handle the case in which the re-selection of the same item by the user doesn't trigger the onItemSelected method (which I have not observed), but I guess that could be handled by adding some code to the onTouch method.
Anyway, the problems Amos pointed out were driving me crazy before thinking of this solution, so I thought I'd share as widely as possible. There are many threads that discuss this, but I've only seen one other solution so far that is similar to this: https://stackoverflow.com/a/25070696/4556980.
Modifying the Spinner is useful if you want to have multiple selections simultaneously in the same activity.
If you only desire the user to have a hierarchical selection, for example:
What do you want to eat?
Fruit
Apples
Bananas
Oranges
Fast Food
Burgers
Fries
Hot dogs,
then the ExpandableListView might be better for you. It allows the user to navigate a hierarchy of different groups and choose a child element. This would be similar to having several Spinners for the user to choose from - if you do not desire a simultaneous selection, that is.
I worked through several of the issues mentioned in this thread before I realized that the PopupMenu widget is what I really wanted. That was easy to implement without the hacks and workarounds needed to change the functionality of a Spinner. PopupMenu was relatively new when this thread was started in 2011, but I hope this helps someone searching for similar functionality now.
I have an unusual issue with my ListView. I currently have a "deselectAll()" method which iterates through the items in my ListView and sets them to unchecked (the items implement the Checkable interface). The "checked" variable gets changed correctly (the view reports as not being checked), but the visual indicator (in this case, a background change) does not show the view as unchecked (the background stays the color of a checked item).
I am iterating and deselecting through my listview like so (I also added my declerations):
private ListView vw_entryList;
private void deselectAll() {
for (int i = 0; i < sAdapter.getCount(); i++) {
((Entry)vw_entryList.getItemAtPosition(i)).setChecked(false);
}
}
The code for my implemented setChecked() is as follows:
public void setChecked(boolean checked) {
_checked = checked;
if (checked) {
setBackgroundResource(R.drawable.listview_checked);
}
else {
setBackgroundResource(R.drawable.listview_unchecked);
}
invalidate();
}
It should be noted that when the items are clicked, they are toggled between checked and unchecked in the OnItemClickListener, and this works ok, with the background change and everything. The code for toggling is very similar:
public void toggle() {
_checked = !_checked;
setBackgroundResource(_checked ?
R.drawable.listview_checked : R.drawable.listview_unchecked);
invalidate();
}
The only difference I can see is where the methods are called from. toggle() is called from within the OnItemClickListener.onClick() method, while my deselectAll() is called from within a button's standard OnClickListener, both in the same class. Does anyone have any ideas as to why the background doesn't change when I call my deselectAll() function?
Do you have custom, non-standard color for the background? If so you might take a look at http://www.curious-creature.org/2008/12/22/why-is-my-list-black-an-android-optimization/ - it boils down to setting android:cacheColorHint attribute of your list to the background color. Maybe that will help.
Edited after further discussion:
I think you need to call getAdapter().notifyDataSetChanged() on the List rather than invalidate(). List is really build in the way that it is relying on adapter to provide the data. What you are doing in fact you have an implicit adapter - Entry is really kept in the adapter and by setting checked, you are changing the data model really, but if you do not call notifyDataSetChanged() the list does not really know that the model has changed and will not recreate the views (invalidate() will only redraw the existing ones).
After trying everything (thanks for your help Jarek), I found a solution that works for my purposes. Instead of implicitly calling the setChecked() within the view that was clicked, I leave it up to the setItemChecked() method within the ListView class.
My updated code:
private void deselectAll() {
for (int i = 0; i < sAdapter.getCount(); i++) {
vw_entryList.setItemChecked(i, false);
}
}
My best guess is that the ListView knows that its items implement the Checkable class, and thus requires itself to be the handler of all item operations. Something along those lines. If anyone can explain in more detail why this solution works while the others did not, I'll reward them with the answer and an upvote.
I'm having an issue with RadioGroup's clearChecked(). I'm displaying a multiple choice question to the user and after the user selects an answer I check the answer, give him some feedback and then move to the next question. In the process of moving to the next question I clearCheck on the RadioGroup.
Can anyone explain to me why the onCheckedChanged method is called 3 times? Once when the change actually occurs (with the user changes), once when I clearCheck(with -1 as the selected id) and once in between (with the user changes again)?
As far as I could tell the second trigger is provoked by clearCheck. Code below:
private void checkAnswer(RadioGroup group, int checkedId){
// this makes sure it doesn't blow up when the check is cleared
// also we don't check the answer when there is no answer
if (checkedId == -1) return;
if (group.getCheckedRadioButtonId() == -1) return;
// check if correct answer
if (checkedId == validAnswerId){
score++;
this.giveFeedBack(feedBackType.GOOD);
} else {
this.giveFeedBack(feedBackType.BAD);
}
// allow for user to see feedback and move to next question
h.postDelayed(this, 800);
}
private void changeToQuestion(int questionNumber){
if (questionNumber >= this.questionSet.size()){
// means we are past the question set
// we're going to the score activity
this.goToScoreActivity();
return;
}
//clearing the check
gr.clearCheck();
// give change the feedback back to question
imgFeedback.setImageResource(R.drawable.question_mark); //OTHER CODE HERE
}
and the run method looks like this
public void run() {
questionNumber++;
changeToQuestion(questionNumber);
}
What I've discovered is that if an item is checked and you call clearCheck() on the radio group it will call onCheckedChanged twice. The first time with the id of the item that was checked and the second time with -1/View.NO_ID. IMHO, this is a bug and apparently it has been around since at least 1.6. See this google code bug report: http://code.google.com/p/android/issues/detail?id=4785
It seems to be that the only solution is to check the actual RadioButton.isChecked() and test if it is true or false. This sort of defeats the purpose of the onCheckedChanged returning the id of the item since you now have to either keep references to those buttons or call findViewById every time.
I doubt they will fix this since changing it would probably break existing code in unexpected ways.
I faced the same problem and i solved with other work-around.
Set CheckedChangeListener as NULL
Do your operation
Reset your OnCheckedChangeListener again
Code snnipet :
rdbGroup.setOnCheckedChangeListener(null);
rdbGroup.clearCheck();
rdbGroup.setOnCheckedChangeListener(checkedChangeListener);
Hope this will help ツ
I had similar problem. My solution:
in procedure:
public void onCheckedChanged(RadioGroup rGroup, int checkedId)
I check checkedId. It equals to -1 if you use clearCheck()
else it equals to selected radiogroup child