I am trying to create an app with a top application bar and a tab bar below. When you scroll down, the bar should hide by moving off the screen (but tabs should stay), and when you scroll back up, the application bar should show again. This behaviour can be seen in WhatsApp. Please see this video for a demonstration. (Taken from Material.io). This is a similar behaviour, although the app bar and tab bar are hidden on scroll, so it is not exactly the behaviour I am looking for.
I have been able to achieve the autohiding, however, there are a few issues:
I have to set the snap of the SliverAppBar to true. Without this, the application bar will not show when I scroll back up.
Although this is works, it is not the behaviour I am looking for. I want the application bar to show smoothly (similar to WhatsApp) rather than coming into view even if you scroll very little.
To clarify, when I scroll all the way down, even if I scroll up very little, the app bar should come into view. I do not want to have to scroll all the way up to see the app bar.
When I scroll down and change tabs, a little bit of the content is cut out of view.
Below is a GIF showing the behaviour:
(See the part when I scroll down on the listView (tab1), then move back to tab2)
Here is the code for the DefaultTabController:
DefaultTabController(
length: 2,
child: new Scaffold(
body: new NestedScrollView(
headerSliverBuilder:
(BuildContext context, bool innerBoxIsScrolled) {
return <Widget>[
new SliverAppBar(
title: Text("Application"),
floating: true,
pinned: true,
snap: true, // <--- this is required if I want the application bar to show when I scroll up
bottom: new TabBar(
tabs: [ ... ], // <-- total of 2 tabs
),
),
];
},
body: new TabBarView(
children: [ ... ] // <--- the array item is a ListView
),
),
),
),
In case it is needed, the full code is in this GitHub repository. main.dart is here.
I also found this related question: Hide Appbar on Scroll Flutter?. However, it did not provide the solution. The same problems persist, and when you scroll up, the SliverAppBar will not show. (So snap: true is required)
I also found this issue on Flutter's GitHub. (Edit: someone commented that they are waiting for the Flutter team to fix this. Is there a possibility that there is no solution?)
This is the output of flutter doctor -v: Pastebin. Certain issues are found, but from what I have learned, they should not have an impact.
Edit: There are two issues for this:
https://github.com/flutter/flutter/issues/29561 (closed)
https://github.com/flutter/flutter/issues/17518
You need to use SliverOverlapAbsorber/SliverOverlapInjector, the following code works for me (Full Code):
#override
Widget build(BuildContext context) {
return Material(
child: Scaffold(
body: DefaultTabController(
length: _tabs.length, // This is the number of tabs.
child: NestedScrollView(
headerSliverBuilder:
(BuildContext context, bool innerBoxIsScrolled) {
// These are the slivers that show up in the "outer" scroll view.
return <Widget>[
SliverOverlapAbsorber(
// This widget takes the overlapping behavior of the SliverAppBar,
// and redirects it to the SliverOverlapInjector below. If it is
// missing, then it is possible for the nested "inner" scroll view
// below to end up under the SliverAppBar even when the inner
// scroll view thinks it has not been scrolled.
// This is not necessary if the "headerSliverBuilder" only builds
// widgets that do not overlap the next sliver.
handle:
NestedScrollView.sliverOverlapAbsorberHandleFor(context),
sliver: SliverSafeArea(
top: false,
sliver: SliverAppBar(
title: const Text('Books'),
floating: true,
pinned: true,
snap: false,
primary: true,
forceElevated: innerBoxIsScrolled,
bottom: TabBar(
// These are the widgets to put in each tab in the tab bar.
tabs: _tabs.map((String name) => Tab(text: name)).toList(),
),
),
),
),
];
},
body: TabBarView(
// These are the contents of the tab views, below the tabs.
children: _tabs.map((String name) {
return SafeArea(
top: false,
bottom: false,
child: Builder(
// This Builder is needed to provide a BuildContext that is "inside"
// the NestedScrollView, so that sliverOverlapAbsorberHandleFor() can
// find the NestedScrollView.
builder: (BuildContext context) {
return CustomScrollView(
// The "controller" and "primary" members should be left
// unset, so that the NestedScrollView can control this
// inner scroll view.
// If the "controller" property is set, then this scroll
// view will not be associated with the NestedScrollView.
// The PageStorageKey should be unique to this ScrollView;
// it allows the list to remember its scroll position when
// the tab view is not on the screen.
key: PageStorageKey<String>(name),
slivers: <Widget>[
SliverOverlapInjector(
// This is the flip side of the SliverOverlapAbsorber above.
handle:
NestedScrollView.sliverOverlapAbsorberHandleFor(
context),
),
SliverPadding(
padding: const EdgeInsets.all(8.0),
// In this example, the inner scroll view has
// fixed-height list items, hence the use of
// SliverFixedExtentList. However, one could use any
// sliver widget here, e.g. SliverList or SliverGrid.
sliver: SliverFixedExtentList(
// The items in this example are fixed to 48 pixels
// high. This matches the Material Design spec for
// ListTile widgets.
itemExtent: 60.0,
delegate: SliverChildBuilderDelegate(
(BuildContext context, int index) {
// This builder is called for each child.
// In this example, we just number each list item.
return Container(
color: Color((math.Random().nextDouble() *
0xFFFFFF)
.toInt() <<
0)
.withOpacity(1.0));
},
// The childCount of the SliverChildBuilderDelegate
// specifies how many children this inner list
// has. In this example, each tab has a list of
// exactly 30 items, but this is arbitrary.
childCount: 30,
),
),
),
],
);
},
),
);
}).toList(),
),
),
),
),
);
}
Update - Sliver App Bar Expanded
If you want to see Sliver App Bar expanded as soon as someone scrolls up i.e. not scrolling all the way to top but just little bit, Then just change snap: false to snap: true in code :)
Solution [Fixing All Points]
After surfing google, stackoverflow, github issues, reddit for hours. I could finally come up with a solution that addresses following:
Sliver App bar with title getting hidden and only tab bar visible after scrolling down. You would see title again when you reach top.
MAJOR : When you scroll in Tab 1 & then Navigate to Tab 2, you would not see any overlap. The content of Tab 2 will not get obstructed by Sliver App bar.
Sliver Padding for top most element in List is 0.
Preserves the Scroll Position in individual Tabs
below is the code, I would attempt to explain in a bit (dartpad preview) :
import 'package:flutter/material.dart';
void main() => runApp(const MyApp());
class MyApp extends StatelessWidget {
const MyApp({Key? key}) : super(key: key);
static const String _title = 'Flutter Code Sample';
#override
Widget build(BuildContext context) {
return const MaterialApp(
title: _title,
home: MyStatelessWidget(),
);
}
}
class MyStatelessWidget extends StatelessWidget {
const MyStatelessWidget({Key? key}) : super(key: key);
#override
Widget build(BuildContext context) {
final List<String> _tabs = <String>['Tab 1', 'Tab 2'];
return DefaultTabController(
length: _tabs.length,
child: Scaffold(
body: NestedScrollView(
headerSliverBuilder: (BuildContext context, bool innerBoxIsScrolled) {
return <Widget>[
SliverOverlapAbsorber(
handle: NestedScrollView.sliverOverlapAbsorberHandleFor(context),
sliver: SliverAppBar(
title: const Text('Books'),
floating: true,
pinned: true,
snap: false,
forceElevated: innerBoxIsScrolled,
bottom: TabBar(
tabs: _tabs.map((String name) => Tab(text: name)).toList(),
),
),
),
];
},
body: TabBarView(
children: _tabs.map((String name) {
return SafeArea(
top: false,
bottom: false,
child: Builder(
builder: (BuildContext context) {
return CustomScrollView(
key: PageStorageKey<String>(name),
slivers: <Widget>[
SliverOverlapInjector(
handle: NestedScrollView.sliverOverlapAbsorberHandleFor(context),
),
SliverPadding(
padding: const EdgeInsets.all(8.0),
sliver: SliverList(
delegate: SliverChildBuilderDelegate(
(BuildContext context, int index) {
return ListTile(
title: Text('Item $index'),
);
},
childCount: 30,
),
),
),
],
);
},
),
);
}).toList(),
),
),
),
);
}
}
Test it out all you want in dartpad, once you are fine then lets try to understand what is happening here.
Most of the code is from flutter documentation of NestedScrollView
They have mentioned very nicely in comments. I am no expert so I would just highlight what I think solved most of the issues.
I believe Two things are critical here:
SliverOverlapAbsorber & SliverOverlapInjector
Use of SliverList instead of ListView
Whatever extra space we were seeing or the space which sliver app bar consumed and first list item was overlapped was mainly resolved with the use of above two points.
To remember the scroll position of tabs, they added PageStorageKey inside CustomScrollView:
key: PageStorageKey<String>(name),
name is just a string -> 'Tab 1'
They also mentioned in docs that we can use SliverFixedExtentList, SliverGrid, basically Sliver widgets. Now use of Sliver widgets should be done when needed. In one of the Flutter Youtube videos (official channel) they mentioned that ListView, GridView, are all high level implementation of Slivers. So Slivers is low level stuff if you looking to super customize scrolling or appearance behaviour.
Please let me know in comments if I missed something or said wrong.
I was able to make the floating Appbar with Tabbar similar to that of WhatsApp by using SliverAppbar with NestedScrollView.
Do add floatHeaderSlivers: true, in NestedScrollView and
pinned: true, floating: true, in SliverAppBar
Link to working code sample
import 'dart:math';
import 'package:flutter/material.dart';
void main() {
runApp(MyApp());
}
class MyApp extends StatelessWidget {
#override
Widget build(BuildContext context) {
return MaterialApp(
title: 'Flutter Demo',
theme: ThemeData(
primarySwatch: Colors.blue,
visualDensity: VisualDensity.adaptivePlatformDensity,
),
home: CustomSliverAppbar(),
);
}
}
class CustomSliverAppbar extends StatefulWidget {
#override
_CustomSliverAppbarState createState() => _CustomSliverAppbarState();
}
class _CustomSliverAppbarState extends State<CustomSliverAppbar>
with SingleTickerProviderStateMixin {
TabController _tabController;
#override
void initState() {
_tabController = TabController(
initialIndex: 0,
length: 2,
vsync: this,
);
super.initState();
}
#override
Widget build(BuildContext context) {
return Scaffold(
body: NestedScrollView(
floatHeaderSlivers: true,
headerSliverBuilder: (BuildContext context, bool innerBoxIsScrolled) {
return <Widget>[
SliverAppBar(
title: Text(
"WhatsApp type sliver appbar",
),
centerTitle: true,
pinned: true,
floating: true,
bottom: TabBar(
indicatorColor: Colors.black,
labelPadding: const EdgeInsets.only(
bottom: 16,
),
controller: _tabController,
tabs: [
Text("TAB A"),
Text("TAB B"),
]),
),
];
},
body: TabBarView(
controller: _tabController,
children: [
TabA(),
const Center(
child: Text('Display Tab 2',
style: TextStyle(fontSize: 16, fontWeight: FontWeight.bold)),
),
],
),
),
);
}
#override
void dispose() {
_tabController.dispose();
super.dispose();
}
}
class TabA extends StatelessWidget {
#override
Widget build(BuildContext context) {
return Scrollbar(
child: ListView.separated(
separatorBuilder: (context, child) => Divider(
height: 1,
),
padding: EdgeInsets.all(0.0),
itemCount: 30,
itemBuilder: (context, i) {
return Container(
height: 100,
width: double.infinity,
color: Colors.primaries[Random().nextInt(Colors.primaries.length)],
);
},
),
);
}
}
--- EDIT 1 --
Alright so I threw together something quick for you. I followed this article (written by Emily Fortuna who is one of the main Flutter devs) to better understand Slivers.
Medium: Slivers, Demystified
But then found this Youtube video that basically used your code so I opted for this one, rather than try to figure out every small detail about Slivers.
Youtube: Using Tab and Scroll Controllers and the NestedScrollView in Dart's Flutter Framework
Turns out you were on the right track with your code. You can use SliverAppBar within NestedScrollView (this wasn't the case last time I tried) but I made a few changes. That I will explain after my code:
import 'package:flutter/material.dart';
import 'dart:math';
void main() => runApp(MyApp());
class MyApp extends StatelessWidget {
// This widget is the root of your application.
#override
Widget build(BuildContext context) {
return MaterialApp(
title: 'Flutter Demo',
theme: ThemeData(
primarySwatch: Colors.blue,
),
home: MyHomePage(title: 'Flutter Demo'),
);
}
}
class MyHomePage extends StatefulWidget {
MyHomePage({Key key, this.title}) : super(key: key);
final String title;
#override
_MyHomePageState createState() => _MyHomePageState();
}
class _MyHomePageState extends State<MyHomePage> with SingleTickerProviderStateMixin /*<-- This is for the controllers*/ {
TabController _tabController; // To control switching tabs
ScrollController _scrollViewController; // To control scrolling
List<String> items = [];
List<Color> colors = [Colors.red, Colors.green, Colors.yellow, Colors.purple, Colors.blue, Colors.amber, Colors.cyan, Colors.pink];
Random random = new Random();
Color getRandomColor() {
return colors.elementAt(random.nextInt(colors.length));
}
#override
void initState() {
super.initState();
_tabController =TabController(vsync: this, length: 2);
_scrollViewController =ScrollController();
}
#override
void dispose() {
super.dispose();
_tabController.dispose();
_scrollViewController.dispose();
}
#override
Widget build(BuildContext context) {
// Init the items
for (var i = 0; i < 100; i++) {
items.add('Item $i');
}
return SafeArea(
child: NestedScrollView(
controller: _scrollViewController,
headerSliverBuilder: (BuildContext context, bool boxIsScrolled) {
return <Widget>[
SliverAppBar(
title: Text("WhatsApp using Flutter"),
floating: true,
pinned: false,
snap: true,
bottom: TabBar(
tabs: <Widget>[
Tab(
child: Text("Colors"),
),
Tab(
child: Text("Chats"),
),
],
controller: _tabController,
),
),
];
},
body: TabBarView(
controller: _tabController,
children: <Widget>[
ListView.builder(
itemBuilder: (BuildContext context, int index) {
Color color = getRandomColor();
return Container(
height: 150.0,
color: color,
child: Text(
"Row $index",
style: TextStyle(
color: Colors.white,
),
),
);
},
//physics: NeverScrollableScrollPhysics(), //This may come in handy if you have issues with scrolling in the future
),
ListView.builder(
itemBuilder: (BuildContext context, int index) {
return Material(
child: ListTile(
leading: CircleAvatar(
backgroundColor: Colors.blueGrey,
),
title: Text(
items.elementAt(index)
),
),
);
},
//physics: NeverScrollableScrollPhysics(),
),
],
),
),
);
}
}
Alright so on to the explanation.
Use a StatefulWidget
Most widgets in Flutter are going to be stateful but it depends on the situation. I think in this case it is better because you are using a ListView which could change as users add or erase conversations/chats.
SafeArea because this widget is great.
Go read about it on Flutter Docs: SafeArea
The Controllers
I think this was the big issue at first but maybe it was something else. But you should usually make your own controllers if you are dealing with custom behavior in Flutter. So I made the _tabController and the _scrollViewController (I don't think I got every bit of functionality out of them, i.e. keeping track of scroll positions between tabs, but they work for the basics). The tab controller that you use for the TabBar and the TabView should be the same.
The Material Widget before the ListTile
You probably would have found this out sooner or later but the ListTile widget is a Material widget and therefore requires a "Material ancestor widget" according to the output I got while trying to render it at first. So I saved you a tiny headache with that. I think it is because I didn't use a Scaffold. (Just keep this in mind when you use Material widgets without Material ancestor widgets)
Hope this helps you get started, if you need any assistance with it just message me or add me to your Github repo and I'll see what I can do.
--- ORIGINAL ---
I answered you on Reddit as well, hopefully you see one of these two soon.
SliverAppBar Info
The key properties you want to have with the SliverAppBar are:
floating: Whether the app bar should become visible as soon as the user scrolls towards the app bar.
pinned: Whether the app bar should remain visible at the start of the scroll view. (This is the one you are asking about)
snap: If snap and floating are true then the floating app bar will "snap" into view.
All this came from the Flutter SliverAppBar Docs. They have lots of animated examples with different combos of floating, pinned and snap.
So for yours the following should work:
SliverAppBar(
title: Text("Application"),
floating: true, // <--- this is required if you want the appbar to come back into view when you scroll up
pinned: false, // <--- this will make the appbar disappear on scrolling down
snap: true, // <--- this is required if you want the application bar to 'snap' when you scroll up (floating MUST be true as well)
bottom: new TabBar(
tabs: [ ... ], // <-- total of 2 tabs
),
),
ScrollView with SliverAppBar
To answer the underlying question of the NestedScrollView. According to the docs (same as above) a SliverAppBar is:
A material design app bar that integrates with a CustomScrollView.
Therefore you cannot use a NestedScrollView you need to use a CustomScrollView. This is the intended use of Sliver classes but they can be used in the NestedScrollView Check out the docs.
Related
Android provides this concept of fast scroll what is useful for large lists.
I'm doing a flutter app, with this piece of code:
body: Scrollbar(
child: ListView(
…
On iOS and on mac it is possible to drag the scrollbar and achieve the same effect of fast scroll, but on android the scroll bar is just visual, I can't interact with it to fast scrolling the list.
My question is: is it possible to enable the "fast scroll" on android?
In order to make Scrollbar work you have to set interactive: true. Please have a look below:
Scrollbar(
thickness: 10,
interactive: true,
isAlwaysShown: true,
controller: scrollController,
child:ListView(),
)
(thickness and isAlwaysShown modified to make it easier for testing)
You have not provided the scroll controllers. Give scrollController to both ScrollBar and ListView
import 'package:flutter/material.dart';
void main() {
runApp(MyApp());
}
class MyApp extends StatelessWidget {
final ScrollController _scrollController = ScrollController();
#override
Widget build(BuildContext context) {
return MaterialApp(
home: Scaffold(
body: Center(
child: Scrollbar(
isAlwaysShown: true,
controller: _scrollController,
child: ListView.builder(
controller: _scrollController,
itemCount: 100,
itemBuilder: (context, index) {
return Card(
child: ListTile(
title: Text("Item: ${index + 1}"),
)
);
}
),
),
),
),
);
}
}
I am new to flutter, i am creating a screen without appbar and status bar, when i run the code its showing a white space in the bottom. If i try to use screenheight to divide it into two then am getting the ovrflowing of my second container.
But the code is running fine in iPhone screen,
Note: i have removed the appbar from the scaffold and removed the notification bar in my main.dart
return Scaffold(
// appBar: AppBar(title: Text('Screen Height')),
body: Column(
children: <Widget>[
Expanded(
child: Container(color: Colors.white),
),
Expanded(
child: Container(color: Colors.red),
)
],
));
to get full screen app, in your main method:
Future<void> main() async {
WidgetsFlutterBinding.ensureInitialized();
await SystemChrome.setEnabledSystemUIOverlays([]);
runApp(MyApp());
}
To add to #LoVe's answer, you might also want to add extendBody:true and extendBodyBehindAppBar: true to your scaffold.
I am unable to replicate the issue you mentioned. Below is the simplest code that I tried using your code on Android emulator and don't see the white space at the bottom:
import 'package:flutter/material.dart';
void main() {
runApp(MyApp());
}
class MyApp extends StatelessWidget {
#override
Widget build(BuildContext context) {
return MaterialApp(
home: MyHomePage()
);
}
}
class MyHomePage extends StatelessWidget {
#override
Widget build(BuildContext context) {
// TODO: implement build
return Scaffold( // appBar: AppBar(title: Text('Screen Height')),
body: Column(children:
[
Expanded
(child: Container
(color: Colors.white),
),
Expanded(
child: Container(color: Colors.red),
)
],
)
);
// );
}
}
There should be an extra line in styles.xml too ,to make this working on Android at least.
1. Add SystemChrome.setEnabledSystemUIOverlays([]);
2. Add <item name="android:windowLayoutInDisplayCutoutMode">shortEdges</item> in styles.xml
i found a solution here:
https://github.com/flutter/flutter/issues/46486
I am building a RegisterPage in flutter and I devided my scaffold into two containers. One for the top half and the other for the bottom half so that the logo/headline can be in the top half and the form be in the bottom half.
Now I noticed after testing on android that the keyboard overlaps the input fields. So I added a SingleChildScrollView() view to fix this. But there is a problem. The content appears to be too big and you can now always scroll even when the keyboard is down. I added a video to demonstrate what I mean.
I think that this space is responsible for that
It looks like that space is reserved for the android navigation bar. How do I remove that? Or how can I size my containers in such a way so that they account for that? Just to be clear the thing I want to know most is how I can stop my SingleChildScrollView() scrolling when the keyboard is down, which is probably cause by the containers being to big.
the_register_page.dart
#override
Widget build(BuildContext context) {
final AuthenticationProvider authenticationProvider = Provider.of<AuthenticationProvider>(context);
return Scaffold(
backgroundColor: Theme.of(context).backgroundColor,
body: Center(
child: ScrollConfiguration(
behavior: ScrollBehaviourWithoutGlow(),
child: SingleChildScrollView(
child: Column(
mainAxisAlignment: MainAxisAlignment.center,
mainAxisSize: MainAxisSize.max,
children: [
Container(
decoration: BoxDecoration(color: Colors.red),
height: MediaQuery.of(context).size.height / 2,
child: _buildLogo(),
),
Container(
decoration: BoxDecoration(color: Colors.green),
height: MediaQuery.of(context).size.height / 2,
child: _buildRegisterForm(authenticationProvider),
),
],
),
),
),
),
);
}
Notice that I used the SystemChrome.setEnabledSystemUIOverlays([]); in my main.dart.
main.dart
void main() {
runApp(App());
}
class App extends StatelessWidget {
#override
Widget build(BuildContext context) {
SystemChrome.setEnabledSystemUIOverlays([]);
return MultiProvider(
providers: [
ChangeNotifierProvider<PreferencesProvider>(
create: (_) => PreferencesProvider()),
ChangeNotifierProvider<AuthenticationProvider>(
create: (_) => AuthenticationProvider()),
Provider<GroupProvider>(create: (_) => GroupProvider()),
Provider<UserProvider>(
create: (_) => UserProvider(),
),
],
child: Consumer<PreferencesProvider>(
builder: (context, preferences, _) => MaterialApp(
home: TheSplashPage(),
routes: <String, WidgetBuilder>{
TheGroupPage.routeName: (BuildContext context) => TheGroupPage(),
TheSettingsPage.routeName: (BuildContext context) =>
TheSettingsPage(),
TheProfilePage.routeName: (BuildContext context) =>
TheProfilePage(),
TheGroupCreationPage.routeName: (BuildContext context) =>
TheGroupCreationPage(),
},
theme: preferences.isDarkMode
? DarkTheme.themeData
: LightTheme.themeData,
debugShowCheckedModeBanner: false,
),
),
);
}
}
Since this post didn't get any answers I decided to upload a video to show what I mean. Here is the video. As you can see you are able to swipe even when the keyboard is down which is not what I want.
https://www.youtube.com/watch?v=Rm91KMFqs60
Edit
This is tested on a android emulator
And my android device a Lenovo P2 with android 7
Edit
I can confirm that this bottom area is the cause. I looked at the pixel height on my pc screen and subtracted that from the container and now I can't scroll when the keyboard is down which is what I want.
So I would like to remove this area or get it's height any idea how?
You're very close. Setting the SystemChrome color to transparent just makes them see-through but won't draw your app over top of the navigation or status bars. The fix is a 2 step process.
Set SystemChrome.setEnabledSystemUIOverlays([SystemUIOverlay.top]) to display only the notification bar or SystemChrome.setEnabledSystemUIOverlays([]) to display your app in full screen.
In your Scaffold set the resizeToBottomInset property to false when you want the screen to display over top of the bottom system UI overlay and to true when the keyboard is up.
Full code example:
void main() async {
WidgetsFlutterBinding.ensureInitialized();
// Display your app in full-screen mode
SystemChrome.setEnabledSystemUIOverlays([]);
// Show the notification bar but not the navigation bar
// SystemChrome.setEnabledSystemUIOverlays([SystemUiOverlay.top]);
runApp(MyApp());
}
class MyApp extends StatelessWidget {
#override
Widget build(BuildContext context) {
return MaterialApp(
title: 'MyApp',
home: MyHomePage(),
);
}
}
class MyHomePage extends StatefulWidget {
#override
_MyHomePageState createState() => _MyHomePageState();
}
class _MyHomePageState extends State<MyHomePage> {
bool resizeToAvoidBottom;
#override
void initState() {
super.initState();
// Do not avoid bottom by default, this allows the display to paint over
// where the Android button bar would be.
resizeToAvoidBottom = false;
}
void setResize(bool resize) {
setState(() {
resizeToAvoidBottom = resize;
});
}
#override
Widget build(BuildContext context) {
final height = MediaQuery.of(context).size.height / 2;
return Scaffold(
resizeToAvoidBottomInset: resizeToAvoidBottom,
body: Container(
height: MediaQuery.of(context).size.height,
child: SingleChildScrollView(
child: Column(
mainAxisAlignment: MainAxisAlignment.spaceBetween,
mainAxisSize: MainAxisSize.min,
children: <Widget>[
Placeholder(
fallbackHeight: height,
),
Container(
height: height,
color: Colors.green,
child: Column(
children: <Widget>[
// Text fields update the resize property so that you
// can still scroll the display when the keyboard is up
// You will need to change when setResize(false) is
// called to suit the needs of your app
TextField(
onTap: () {
setResize(true);
},
onSubmitted: (str) {
setResize(false);
},
),
TextField(
onTap: () {
setResize(true);
},
onSubmitted: (str) {
setResize(false);
},
),
],
))
],
),
),
),
);
}
}
This is actually a current Issue.
There is workaround which you could use, which is setting extendxBody: true in your Scaffold.
But if it is not extremely critical I would wait for the fix to be deployed.
To clarify: My answer is about the empty space at the bottom.
The API documentation: https://api.flutter.dev/flutter/material/Scaffold-class.html says:
The Scaffold was designed to be the single top level container for a
MaterialApp and it's typically not necessary to nest scaffolds. For
example in a tabbed UI, where the bottomNavigationBar is a TabBar and
the body is a TabBarView, you might be tempted to make each tab bar
view a scaffold with a differently titled AppBar. It would be better
to add a listener to the TabController that updates the AppBar.
Does it mean there needs to be only one single Scaffold under the Material App or one single parent Scaffold for each page. If it's the first, how do we navigate? If the it's later, doesn't it mean the common AppBar and BottomBar get re-rendered on each navigation? What's the best practice.
It means that, usually, there should be one Scaffold for each page (more precisely, for each Route/screen), and that you should not nest Scaffolds.
Navigating between screens
For example, take a look at this snippet that you can run in DartPad:
import 'package:flutter/material.dart';
void main() {
runApp(MaterialApp(
title: 'Navigation Basics',
home: FirstRoute(),
));
}
class FirstRoute extends StatelessWidget {
#override
Widget build(BuildContext context) {
return Scaffold(
appBar: AppBar(
title: Text('First Route'),
),
body: Center(
child: RaisedButton(
child: Text('Open route'),
onPressed: () {
Navigator.push(
context,
MaterialPageRoute(builder: (context) => SecondRoute()),
);
},
),
),
);
}
}
class SecondRoute extends StatelessWidget {
#override
Widget build(BuildContext context) {
return Scaffold(
appBar: AppBar(
title: Text("Second Route"),
),
body: Center(
child: RaisedButton(
onPressed: () {
Navigator.pop(context);
},
child: Text('Go back!'),
),
),
);
}
}
Here, you can see there are two distinct pages/Routes/screens, and each one has its own Scaffold. We are navigating back and forth by using Navigator, and so our pages are being added to the stack, one Scaffold on top of the other. That is fine.
If the it's later, doesn't it mean the common AppBar and BottomBar get re-rendered on each navigation?
Yes, but that is precisely what we want when we make two separate screens, each one with its own Scaffold.
Navigating inside the body of a Scaffold / nested navigations
On the other hand, take a look at this example:
import 'package:flutter/material.dart';
void main() {
runApp(MaterialApp(
title: 'Navigation Basics',
home: FirstRoute(),
));
}
class FirstRoute extends StatelessWidget {
#override
Widget build(BuildContext context) {
return Scaffold(
appBar: AppBar(
title: Text('First Route'),
),
body: Scaffold(
body: Center(
child: RaisedButton(
child: Text('Open route'),
onPressed: () {},
),
),
),
);
}
}
Here, we are nesting two Scaffolds, and, as you can see, the second app bar is being drawn below the first app bar. That would not be the best approach for tabbed or nested navigations. If you want to navigate inside the body of a Scaffold, and change the app bar depending on the content, using TabControllers, such as DefaultTabController, is preferred. Take a look at this example:
import 'package:flutter/material.dart';
void main() {
runApp(TabBarDemo());
}
class TabBarDemo extends StatelessWidget {
#override
Widget build(BuildContext context) {
return MaterialApp(
home: DefaultTabController(
length: 3,
child: Scaffold(
appBar: AppBar(
bottom: TabBar(
tabs: [
Tab(icon: Icon(Icons.directions_car)),
Tab(icon: Icon(Icons.directions_transit)),
Tab(icon: Icon(Icons.directions_bike)),
],
),
title: Text('Tabs Demo'),
),
body: TabBarView(
children: [
Icon(Icons.directions_car),
Icon(Icons.directions_transit),
Icon(Icons.directions_bike),
],
),
),
),
);
}
}
As you can see, we have used only one Scaffold, since we are dealing with only one screen, really. It just happens that we want to show content pages and navigate inside the body of the Scaffold.
Conclusion
As a general rule of thumb: use only one Scaffold per Route/screen. Use only one Scaffold with widgets such as TabController or IndexedStack to navigate the content inside the body of a single screen.
I want to add a transparent appBar over a PageView.
The Pageview is implemented using Stacks in Flutter, So that all the content is placed over an image. Since it is different than how Tabs work, I need to place an appBar such that even during Scrolling b/w multiple pageViews, the appBar remains Fixed at given position.
I am using following Code to achieve this, but it is showing various kind of errors.
import 'package:flutter/material.dart';
import 'package:page_transformer/data.dart';
import 'package:page_transformer/intro_page_item.dart';
import 'package:page_transformer/page_transformer.dart';
class IntroPageView extends StatelessWidget{
#override
Widget build(BuildContext context) {
List<Widget> children = new List();
return
Stack(
fit: StackFit.expand,
children: [
_buildBackground(),
_buildforeground()
],
);
}
Widget _buildforeground() => new AppBar(
title: Text('Antara',
textDirection: TextDirection.rtl,),
);
Widget _buildBackground() => PageTransformer(
pageViewBuilder: (context, visibilityResolver) {
return PageView.builder(
controller: PageController(viewportFraction: 1.0),
itemCount: sampleItems.length,
itemBuilder: (context, index) {
final item = sampleItems[index];
final pageVisibility =
visibilityResolver.resolvePageVisibility(index);
return IntroPageItem(
item: item,
pageVisibility: pageVisibility,
);
},
);
},
);
}
Please tell me where i am wrong, Also, i forgot to mention that the pageviews are stateful widgets, and the PageTransformer widget is used to give parallax effect while scrolling b/w pageviews.
Thank You
You should apply two changes to your code to force the height
Remove the StackFit.expand because it makes the bar to occupy the whole screen
Wrap the AppBar with a Container or SizedBox and provide a height to constrain it
And finally set the transparent color and elevation to 0.0
#override
Widget build(BuildContext context) {
List<Widget> children = new List();
return Stack(
//fit: StackFit.expand,
children: [
_buildBackground(),
_buildforeground(),
],
);
}
Widget _buildforeground() => SizedBox(
height: 80.0,
child: new AppBar(
backgroundColor: Colors.transparent,
elevation: 0.0,
title: Text(
'Antara',
textDirection: TextDirection.rtl,
style: TextStyle(color: Colors.grey),
),
),
);