Related
I'm trying to create an app for Android using OpenGL ES, but I'm having trouble handling touch input.
I've created a class CubeGLRenderer which spawns a Cube. CubeGLRenderer is in charge of the projection and view matrix, and Cube is in charge of its model matrix. The Cube is moving along the positive X axis, with no movement in Y nor Z.
CubeGLRenderer updates the view matrix each frame in order to move along with the cube, making the cube look stationary on screen:
Matrix.setLookAtM(mViewMatrix, 0, 0.0f, cubePos.y, -10.0f, 0.0f, cubePos.y, 0.0f, 0.0f, 1.0f, 0.0f);
The projection matrix is calculated whenever the screen dimension changes (i.e. when the orientation of the device changes). The two matrices are then muliplied and passed to Cube.draw() where it applies its model matrix and renders itself to screen.
So far, so good. Let's move on to the problem.
I want to touch the screen and calculate an angle from the center of the cube's screen coordinates to the point of the screen that I touched.
I thought I'd just accomplish this using GLU.gluProject(), but I'm either not using it correctly or simply haven't understood it at all.
Here's the code I use to calculate the screen coordinates from the cube's world coordinates:
public boolean onTouchEvent(MotionEvent e) {
Vec3 cubePos = cube.getPos();
float[] modelMatrix = cube.getModelMatrix();
float[] modelViewMatrix = new float[16];
Matrix.multiplyMM(modelViewMatrix, 0, mViewMatrix, 0, modelMatrix, 0);
int[] view = {0, 0, width, height};
float[] screenCoordinates = new float[3];
GLU.gluProject(cubePos.x, cubePos.y, cubePos.z, modelViewMatrix, 0, mProjectionMatrix, 0, view, 0, screenCoordinates, 0);
switch (e.getAction()) {
case MotionEvent.ACTION_DOWN:
Log.d("CUBEAPP", "screenX: " + String.valueOf(screenCoordinates[0]));
break;
}
return true;
}
What am I doing wrong?
The same calculation you do in the vertex shader you use to render the cube should be used to translate the cube center into the screen space.
Normally you would multiply each each vertex of the cube by the modelViewProjection matrix and then send it to the fragment shader.
You should use the exact same matrix you use in the vertex shader and multiply the center of the cube with it.
However, multiplying a 4x4 matrix with a Vec4 vertex (x, y, z, 1) would give you a Vec4 result of (x2, y2, z2, w).
In order to get the screen space coordinates you need to divide x2 and y2 by w!
After you divide it by w your xy coordinates are suppose to be within [-1..1]x[-1..1] range.
In order to get the exact pixel you would need to normalize x2/w and y2/w into [0..1] and then multiply it by the screen resolution width and height.
Hope this helps.
Hi I have a 512x512 texture that I would like to display within my GlSurfaceview at a 100% scale at a 1:1 pixel for pixel view.
I have having troubles achieving this and require some assistance.
Every combination of settings in OnSurfaceChanged and onDrawFrame result in a scaled image.
Can someone pls direct me to an example where this is possible.
private float[] mProjectionMatrix = new float[16];
// where mWidth and mHeight are set to 512
public void onSurfaceChanged(GL10 gl, int mWidth, int mHeight) {
GLES20.glViewport(0, 0, mWidth, mHeight);
float left = -1.0f /(1/ScreenRatio );
float right = 1.0f /(1/ScreenRatio );
float bottom = -1.0f ;
float top = 1.0f ;
final float near = 1.0f;
final float far = 10.0f;
Matrix.frustumM(mProjectionMatrix, 0, left, right, bottom, top, near, far);
}
#Override
public void onDrawFrame(GL10 glUnused ) {
....stuff here
Matrix.setIdentityM(mModelMatrix, 0);
Matrix.translateM(mModelMatrix, 0, 0, 0, 1);
Matrix.rotateM(mModelMatrix, 0, 0.0f, 1.0f, 1.0f, 0.0f);
drawCube();
}
many thanks,
There's various options. The simplest IMHO is to not apply any view/projection transformations at all. Then draw a textured quad with a range of (-1.0, 1.0) for both the x- and y-coordinates. That would get your texture to fill the entire view. Since you want it displayed in a 512x512 part of the view, you can set the viewport to cover only that area:
glViewport(0, 0, 512, 512);
Another possibility is that you reduce the range of your input coordinates to map to a 512x512 area of the screen. Or scale the coordinates in the vertex shader.
You didn't specify what version of OpenGL ES you use. In ES 3.0, you could also use glBlitFramebuffer() to copy the texture to your view.
I am examining an interesting problem I'm facing with OpenGL lighting on Android. I'm working on a 3D Viewer where you can add and manipulate 3D objects. You can also set a light with different attributes. The problem I was facing with my Viewer was that the highlight on the 3D objects from the light (it is a point light) behaved strangely. If the light source was in the exact same point as the camera, the highlight would move in the opposite direction you would expect. (So if you move the object to the left, the highlight moves to the leftedge of the object as well, instead of the right, which is what I was expecting.)
So to further narrow the problem down I've created a small sample application that only renders a square and then I rotate that square around the camera position (the origin), which is also where the light is placed. This should result in all squares facing the camera directly, so that they would be completely highlighted. The result though looked like that:
Can it be that these artifacts appear because of the distortion you get on the border due to the projection?
In the first image the distance between the sphere and the camera is about 20 units and the size of the sphere is about 2. If I move the light closer to the object the highlight looks a lot better, in the way I'm expecting it.
In the second image the radius in which the squares are located is 25 units.
I'm using OpenGL ES 1.1 (since I was struggling to get it to work with shaders in ES 2.0) on Android 3.1
Here is some of the code I'm using:
public void onDrawFrame(GL10 gl) {
// Setting the camera
GLU.gluLookAt(gl, 0, 0, 0, 0f, 0f, -1f, 0f, 1.0f, 0.0f);
gl.glMatrixMode(GL10.GL_MODELVIEW);
gl.glLoadIdentity();
for (int i = 0; i < 72; i++) {
gl.glPushMatrix();
gl.glRotatef(5f * i, 0, 1, 0);
gl.glTranslatef(0, 0, -25);
draw(gl);
gl.glPopMatrix();
}
}
public void draw(GL10 gl) {
setMaterial(gl);
gl.glEnable(GL10.GL_NORMALIZE);
gl.glEnableClientState(GL10.GL_NORMAL_ARRAY);
gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
gl.glFrontFace(GL10.GL_CCW);
// Enable the vertex and normal state
gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer);
gl.glNormalPointer(GL10.GL_FLOAT, 0, mNormalBuffer);
gl.glDrawElements(GL10.GL_TRIANGLES, mIndexBuffer.capacity(), GL10.GL_UNSIGNED_SHORT, mIndexBuffer);
gl.glDisableClientState(GL10.GL_VERTEX_ARRAY);
gl.glDisableClientState(GL10.GL_NORMAL_ARRAY);
}
// Setting the light
private void drawLights(GL10 gl) {
// Point Light
float[] position = { 0, 0, 0, 1 };
float[] diffuse = { .6f, .6f, .6f, 1f };
float[] specular = { 1, 1, 1, 1 };
float[] ambient = { .2f, .2f, .2f, 1 };
gl.glEnable(GL10.GL_LIGHTING);
gl.glEnable(GL10.GL_LIGHT0);
gl.glMatrixMode(GL10.GL_MODELVIEW);
gl.glLoadIdentity();
gl.glLightfv(GL10.GL_LIGHT0, GL_POSITION, position, 0);
gl.glLightfv(GL10.GL_LIGHT0, GL_DIFFUSE, diffuse, 0);
gl.glLightfv(GL10.GL_LIGHT0, GL_AMBIENT, ambient, 0);
gl.glLightfv(GL10.GL_LIGHT0, GL_SPECULAR, specular, 0);
}
private void setMaterial(GL10 gl) {
float shininess = 30;
float[] ambient = { 0, 0, .3f, 1 };
float[] diffuse = { 0, 0, .7f, 1 };
float[] specular = { 1, 1, 1, 1 };
gl.glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, diffuse, 0);
gl.glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, ambient, 0);
gl.glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, specular, 0);
gl.glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, shininess);
}
I'm setting the light in the beginning, when the activity is started (in onSurfaceCreated) and the material everytime I draw a square.
The effect in your second example (with the squares) is rather due to the default non-local viewer that OpenGL uses. By default the eye-space view vector (the vector from vertex to camera, used for the specular highlight computation) is just taken to be the (0, 0, 1)-vector, instead of the normalized vertex position. This approximation is only correct if the vertex is in the middle of the screen, but gets more and more incorrect the farther you move to the boundary of the srceen.
To change this and let OpenGL use the real vector from the vertex to the camera, just use the glLightModel function, especially
glLightModeli(GL_LIGHT_MODEL_LOCAL_VIEWER, GL_TRUE);
I'm not sure if this is also the cause for your first problem (with the sphere), but maybe, just try it.
EDIT: It seems you cannot use GL_LIGHT_MODEL_LOCAL_VIEWER in OpenGL ES. In this case there is no way around this problem, except switching to OpenGL ES 2.0 and doing all lighting computations yourself, of course.
Your light is probably moving when you're moving your object.
Take a look at this answer http://www.opengl.org/resources/faq/technical/lights.htm#ligh0050
I need a little help with this:
android developers, Tutorials: OpenGLES10.
a link
It all works fine for the first Triangle, until I put in the code for Projection & Camera View. This should rezise OpenGLES Square view to match Phone's screen, so object stay in propotions.
As a Newbie watching, the code looks fine and i have cheked with referencefiles, that there's not missing a parameter or something like that. But now i'm lost..! Can't see what's wrong.
If Projection and Camera code are applied, there is no triangle, but the app. is runing and the View with backgroundcolor are shown.
Here is my code:
package notme.helloopengles10;
import java.nio.ByteBuffer;
import java.nio.ByteOrder;
import java.nio.FloatBuffer;
import javax.microedition.khronos.egl.EGLConfig;
import javax.microedition.khronos.opengles.GL10;
import android.opengl.GLSurfaceView;
import android.opengl.GLU;
public class HelloOpenGLES10Renderer implements GLSurfaceView.Renderer {
// Set the background frame color
public void onSurfaceCreated(GL10 gl, EGLConfig config) {
gl.glClearColor(0.5f, 0.5f, 0.5f, 1.0f);
// initialize the triangle vertex array
initShapes();
//enable use of vertex arrays
gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
}
public void onDrawFrame(GL10 gl) {
// Redraw background color
gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT);
/* // set GL_MODELVIEW transformation mode (If outline from here to after GLU.gluLookAt() - it works when also outlines further down i code!
gl.glMatrixMode(GL10.GL_MODELVIEW);
gl.glLoadIdentity(); // reset Matrix to its default state
// when using GL_MODELVIEW, you must set the view point
GLU.gluLookAt(gl, 0, 0, -5, 0f, 0f, 0f, 0f, 1.0f, 0.0f); */
//Draw Triangel
gl.glColor4f(0.63671875f, 0.76953125f, 0.22265625f, 0.0f);
gl.glVertexPointer(3, GL10.GL_FLOAT, 0, triangleVB);
gl.glDrawArrays(GL10.GL_TRIANGLES, 0, 3);
}
// Redraw on orientation changes // adjust for screen size ratio
public void onSurfaceChanged(GL10 gl, int width, int height) {
gl.glViewport(0, 0, width, height);
// Make adjustments for screen ratio
/*(If outline from here to after gl.Frumstumf() - it works!
float ratio = (float) width / height;
gl.glMatrixMode(GL10.GL_PROJECTION); // set matrix to projection mode
gl.glLoadIdentity(); // reset the matrix to its default state
gl.glFrustumf(-ratio, ratio, -1, 1, 3, 7); // apply the projection */
}
/*
* Draw a shape, a triangle. first add new member variable to contain
* the vertices of a triangle
*/
private FloatBuffer triangleVB;
//Create a method, initShaoe(), which populate the members variable
private void initShapes(){
//create a array
float triangleCoords[] = {
// X, Y, Z
-0.5f, -0.25f, 0,
0.5f, -0.25f, 0,
0.0f, 0,559016994f, 0
};
// initialize vertex Buffer for triangle
ByteBuffer vbb= ByteBuffer.allocateDirect(
//(# of coordinates values * 4 bytes per float)
triangleCoords.length * 4 );
vbb.order(ByteOrder.nativeOrder()); // use device hardware's native byte order
triangleVB = vbb.asFloatBuffer(); //create floating point buffer from the ByteBuffer
triangleVB.put(triangleCoords); // add coordinates to the FloatBuffer
triangleVB.position(0); // set the buffer to read the first coordinate
}
} // end
I hope some one can tell me, where things go wrong?
DevTool: Eclipse.
I had the same problem with this tutorial and it got solved when I changed the order of multiplying in the vertex shader code in the Triangle class. So instead of having uMVPMatrix * vPosition, replace it with vPosition * uMVPMatrix. I guess the reason for this is because vPosition is a row vector.
The code looks resonable (if you uncomment the parts that are commented out at the moment). Your matrix modification code is quite correct and all transformations are applied to the correct matrices.
But at the moment you are looking from the point (0,0,-5) to the point (0,0,0) and therefore along the +z axis. But since the default OpenGL view looks along the -z axis, you actually rotate the view 180 degrees around the y-axis. Whereas this is absolutely no problem, you now see the back-side of the triangle. So can it be, that you have back-face culling enabled and this back-side is just optimized away? Just try disabling back-face culling by calling glDisable(GL_CULL_FACE) or change the -5 in the gluLookAt call to a 5, so that you look along the -z axis.
You can also try to use gluPerspective(45, ratio, 3, 7) instead of the glFrustum call, but your arguments to glFrustum look quite reasonable. Of course, keep in mind that both calls create a perspective view, with farther objects getting smaller, like in reality. If you actually want a parallel/orthographic view (where size on screen is independent on depth) you should replace the glFrustum with a glOrtho, though the parameters can stay the same.
Your call to gluLookAt trashes your modelview matrix. You should call this function with the projection matrix active.
http://www.opengl.org/sdk/docs/man/xhtml/gluLookAt.xml
This code shows the triangle for me:
public void onDrawFrame(GL10 gl) {
// Redraw background color
gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT);
gl.glMatrixMode(GL10.GL_PROJECTION);
gl.glLoadIdentity();
// when using GL_MODELVIEW, you must set the view point
GLU.gluLookAt(gl, 0, 0, -5, 0f, 0f, 0f, 0f, 1.0f, 0.0f);
// set GL_MODELVIEW transformation mode (If outline from here to after GLU.gluLookAt() - it works when also outlines further down i code!
gl.glMatrixMode(GL10.GL_MODELVIEW);
gl.glLoadIdentity(); // reset Matrix to its default state
//Draw Triangel
gl.glColor4f(0.63671875f, 0.76953125f, 0.22265625f, 0.0f);
gl.glVertexPointer(3, GL10.GL_FLOAT, 0, triangleVB);
gl.glDrawArrays(GL10.GL_TRIANGLES, 0, 3);
}
I've been beating my head against the desk trying to figure this out for days now, and after scouring Stack Overflow and the web, I haven't found any examples that have worked for me. I've finally got code that's seems close, so maybe you guys (and gals?) can help me figure this out.
My first problem is that I'm trying to implement a motion blur by taking a screen grab as a texture, then drawing the texture over the next frame with transparency -- or use more frames for more blur. (If anyone's interested, this is the guide I followed: http://www.codeproject.com/KB/openGL/MotionBlur.aspx)
I've got the screen saving as a texture working fine. The issue I'm having is drawing in Ortho mode on top of the screen. After much head banging, I finally got a basic square drawing, but my lack of OpenGL ES understanding and an easy to follow example are holding me back now. I need to take the texture I saved, and draw it into the square I drew. Nothing I've been doing seems to work.
Also, my second problem, is drawing more complex 3d models into Ortho mode. I can't seem to get any models to draw. I'm using the (slightly customized) min3d framework (http://code.google.com/p/min3d/), and I'm trying to draw Object3d's in Ortho mode just like I draw them in Perspective mode. As I understand it, they should draw the same, they should just not have depth. Yet I don't seem to see them at all.
Here's the code I'm working with. I've tried a ton of different things and this is the closest I've gotten (actually drawing something on the screen that can be seen). I still have no idea how to get a proper 3d model drawing in the ortho view. I'm sure I'm doing something horribly wrong and probably completely misunderstanding some basic aspects of OpenGL drawing. Let me know if there's any other code I need to post.
// Gets called once, before all drawing occurs
//
private void reset()
{
// Reset TextureManager
Shared.textureManager().reset();
// Do OpenGL settings which we are using as defaults, or which we will not be changing on-draw
// Explicit depth settings
_gl.glEnable(GL10.GL_DEPTH_TEST);
_gl.glClearDepthf(1.0f);
_gl.glDepthFunc(GL10.GL_LESS);
_gl.glDepthRangef(0,1f);
_gl.glDepthMask(true);
// Alpha enabled
_gl.glEnable(GL10.GL_BLEND);
_gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA);
// "Transparency is best implemented using glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)
// with primitives sorted from farthest to nearest."
// Texture
_gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); // (OpenGL default is GL_NEAREST_MIPMAP)
_gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // (is OpenGL default)
// CCW frontfaces only, by default
_gl.glFrontFace(GL10.GL_CCW);
_gl.glCullFace(GL10.GL_BACK);
_gl.glEnable(GL10.GL_CULL_FACE);
// Disable lights by default
for (int i = GL10.GL_LIGHT0; i < GL10.GL_LIGHT0 + NUM_GLLIGHTS; i++) {
_gl.glDisable(i);
}
//
// Scene object init only happens here, when we get GL for the first time
//
}
// Called every frame
//
protected void drawScene()
{
if(_scene.fogEnabled() == true) {
_gl.glFogf(GL10.GL_FOG_MODE, _scene.fogType().glValue());
_gl.glFogf(GL10.GL_FOG_START, _scene.fogNear());
_gl.glFogf(GL10.GL_FOG_END, _scene.fogFar());
_gl.glFogfv(GL10.GL_FOG_COLOR, _scene.fogColor().toFloatBuffer() );
_gl.glEnable(GL10.GL_FOG);
} else {
_gl.glDisable(GL10.GL_FOG);
}
// Sync all of the object drawing so that updates in the mover
// thread can be synced if necessary
synchronized(Renderer.SYNC)
{
for (int i = 0; i < _scene.children().size(); i++)
{
Object3d o = _scene.children().get(i);
if(o.animationEnabled())
{
((AnimationObject3d)o).update();
}
drawObject(o);
}
}
//
//
//
// Draw the blur
// Set Up An Ortho View
_switchToOrtho();
_drawMotionBlur();
// Switch back to the previous view
_switchToPerspective();
_saveScreenToTexture("blur", 512);
}
private void _switchToOrtho()
{
// Set Up An Ortho View
_gl.glDisable(GL10.GL_DEPTH_TEST);
_gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection
_gl.glPushMatrix(); // Push The Matrix
_gl.glLoadIdentity(); // Reset The Matrix
_gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f);
//_gl.glOrthof(0f, 480f, 0f, 800f, -100f, 100f);
_gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix
_gl.glPushMatrix(); // Push The Matrix
_gl.glLoadIdentity(); // Reset The Matrix
}
private void _switchToPerspective()
{
// Switch back to the previous view
_gl.glEnable(GL10.GL_DEPTH_TEST);
_gl.glMatrixMode(GL10.GL_PROJECTION);
_gl.glPopMatrix();
_gl.glMatrixMode(GL10.GL_MODELVIEW);
_gl.glPopMatrix(); // Pop The Matrix
}
private void _saveScreenToTexture(String $textureId, int $size)
{
// Save the screen as a texture
_gl.glViewport(0, 0, $size, $size);
_gl.glBindTexture(GL10.GL_TEXTURE_2D, _textureManager.getGlTextureId($textureId));
_gl.glCopyTexImage2D(GL10.GL_TEXTURE_2D,0,GL10.GL_RGB,0,0,512,512,0);
_gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR);
_gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR);
_gl.glViewport(0, 0, 480, 800);
}
private void _drawMotionBlur()
{
// Vertices
float squareVertices[] = {
-3f, 0f, // Bottom Left
475f, 0f, // Bottom Right
475f, 800f, // Top Right
-3f, 800f // Top Left
};
ByteBuffer vbb = ByteBuffer.allocateDirect(squareVertices.length * 4);
vbb.order(ByteOrder.nativeOrder());
FloatBuffer vertexBuffer = vbb.asFloatBuffer();
vertexBuffer.put(squareVertices);
vertexBuffer.position(0);
//
//
// Textures
FloatBuffer textureBuffer; // buffer holding the texture coordinates
float texture[] = {
// Mapping coordinates for the vertices
0.0f, 1.0f, // top left (V2)
0.0f, 0.0f, // bottom left (V1)
1.0f, 1.0f, // top right (V4)
1.0f, 0.0f // bottom right (V3)
};
ByteBuffer byteBuffer = ByteBuffer.allocateDirect(squareVertices.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
byteBuffer = ByteBuffer.allocateDirect(texture.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
textureBuffer = byteBuffer.asFloatBuffer();
textureBuffer.put(texture);
textureBuffer.position(0);
//
//
//
_gl.glLineWidth(3.0f);
_gl.glTranslatef(5.0f, 0.0f, 0.0f);
_gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer);
_gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
_gl.glDrawArrays(GL10.GL_LINE_LOOP, 0, 4);
//_gl.glTranslatef(100.0f, 0.0f, 0.0f);
//_gl.glDrawArrays(GL10.GL_LINE_LOOP, 0, 4);
//_gl.glTranslatef(100.0f, 0.0f, 0.0f);
//_gl.glDrawArrays(GL10.GL_LINE_LOOP, 0, 4);
_gl.glEnable(GL10.GL_TEXTURE_2D);
_gl.glEnable(GL10.GL_BLEND);
_gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
_gl.glLoadIdentity();
//
//
//
_gl.glBindTexture(GL10.GL_TEXTURE_2D, _textureManager.getGlTextureId("blur"));
_gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer);
_gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4);
//
//
//
_gl.glDisable(GL10.GL_BLEND);
_gl.glDisable(GL10.GL_TEXTURE_2D);
_gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
}
EDIT: Here's a simpler example, it's all in the one function and doesn't include any of the saving the screen to a texture stuff. This is just drawing a 3d scene, switching to Ortho, drawing a square with a texture, then switching back to perspective.
// Called every frame
//
protected void drawScene()
{
// Draw the 3d models in perspective mode
// This part works (uses min3d) and draws a 3d scene
//
for (int i = 0; i < _scene.children().size(); i++)
{
Object3d o = _scene.children().get(i);
if(o.animationEnabled())
{
((AnimationObject3d)o).update();
}
drawObject(o);
}
// Set Up The Ortho View to draw a square with a texture
// over the 3d scene
//
_gl.glDisable(GL10.GL_DEPTH_TEST);
_gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection
_gl.glPushMatrix(); // Push The Matrix
_gl.glLoadIdentity(); // Reset The Matrix
_gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f);
_gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix
_gl.glPushMatrix(); // Push The Matrix
_gl.glLoadIdentity(); // Reset The Matrix
// Draw A Square With A Texture
// (Assume that the texture "blur" is already created properly --
// it is as I can use it when drawing my 3d scene if I apply it
// to one of the min3d objects)
//
float squareVertices[] = {
-3f, 0f, // Bottom Left
475f, 0f, // Bottom Right
475f, 800f, // Top Right
-3f, 800f // Top Left
};
ByteBuffer vbb = ByteBuffer.allocateDirect(squareVertices.length * 4);
vbb.order(ByteOrder.nativeOrder());
FloatBuffer vertexBuffer = vbb.asFloatBuffer();
vertexBuffer.put(squareVertices);
vertexBuffer.position(0);
FloatBuffer textureBuffer; // buffer holding the texture coordinates
float texture[] = {
// Mapping coordinates for the vertices
0.0f, 1.0f, // top left (V2)
0.0f, 0.0f, // bottom left (V1)
1.0f, 1.0f, // top right (V4)
1.0f, 0.0f // bottom right (V3)
};
ByteBuffer byteBuffer = ByteBuffer.allocateDirect(squareVertices.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
byteBuffer = ByteBuffer.allocateDirect(texture.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
textureBuffer = byteBuffer.asFloatBuffer();
textureBuffer.put(texture);
textureBuffer.position(0);
_gl.glLineWidth(3.0f);
_gl.glTranslatef(5.0f, 0.0f, 0.0f);
_gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer);
_gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
_gl.glDrawArrays(GL10.GL_LINE_LOOP, 0, 4);
_gl.glEnable(GL10.GL_TEXTURE_2D);
_gl.glEnable(GL10.GL_BLEND);
_gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
_gl.glLoadIdentity();
_gl.glBindTexture(GL10.GL_TEXTURE_2D, _textureManager.getGlTextureId("blur"));
_gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer);
_gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4);
_gl.glDisable(GL10.GL_BLEND);
_gl.glDisable(GL10.GL_TEXTURE_2D);
_gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
// Switch Back To The Perspective Mode
//
_gl.glEnable(GL10.GL_DEPTH_TEST);
_gl.glMatrixMode(GL10.GL_PROJECTION);
_gl.glPopMatrix();
_gl.glMatrixMode(GL10.GL_MODELVIEW);
_gl.glPopMatrix(); // Pop The Matrix
}
EDIT2: Thanks to Christian's answer, I removed the second glVertexPointer and _gl.glBlendFunc (GL10.GL_ONE, GL10.GL_ONE); (I deleted them from the sample code above as well so it wouldn't confuse the question). I now have a texture rendering, but only in one of the triangles that make up the square. So I'm seeing a triangle in the left portion of the screen that has the texture applied. Why is it not being applied to both halves of the square? I think it's because I have only one of these calls: gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); so I'm literally only drawing one triangle.
First, you set the blend function to (GL_ONE, GL_ONE), which will just add the blur texture to the framebuffer and make the whole scene overbright. You probalby want to use (GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA), but then you have to make sure your blur texture has the correct alpha, by configuring the texture environment to use a constant value for the alpha (instead of the texture's) or use GL_MODULATE with a (1,1,1,0.5) coloured square. Alternatively use a fragment shader.
Second, you specify a size 3 in the second call to glVertexPointer, but your data are 2d vectors (the first call is right).
glOrtho is not neccessarily 2D, its just a camera without perspective distortion (farther objects don't get smaller). The parameters to glOrtho specify your screen plane size in view coordinates. Thus if your scene covers the world in the unit cube, an ortho of 480x800 is just too large (this is no problem if you draw other objects than in perspective, as your square or UI elements, but when you want to draw your same 3d objects the scales have to match). Another thing is that in ortho the near and far distances still matter, everything that falls out is clipped away. So if your camera is at (0,0,0) and you view along -z with a glOrtho of (0,480,0,800,-1,1), you will only see those objects that intersect the (0,0,-1)-(480,800,1)-box.
So keep in mind, that glOrtho and glFrustum (or gluPerspective) all define a 3d viewing volume. In ortho its a box and in frustum its, guess a frustum (capped pyramid). consult some more introductory texts on transformations and viewing if this was not clear enough.