I can not add physical device to Android studio - android

Physical device option is not shown
i'm trying to connect my device but there is no option appear

Please enable developer option in your device.
Step to enable developer option.
Open Setting app in device.
Search "Build number" & tap until message come "You are developer now".
Move back to Setting & search "Developer options" & tap on it.
In Developer option make toggle ON & also make "USB debugging" ON.
That's it!!

check if android sdk is installed on your system. You need to enable debugging in your phone settings (Android) After , connect your phone via USB to your machine. you will be asked to give access, you validate on your phone.

Related

How to get pair device dialog to show when adb debugging over wireless

I'm trying to adb debug over wireless per this. However, I'm only able to get to step 3/4: "Enable the Wireless debugging option"
and not able to find the pictured dialog for step 5 where it asks: "Select Pair device with pairing code. Take note of the pairing code, IP address, and port number displayed on the device (see image)." I was wondering how to get this dialog to show up. This is on a Pixel 3 running Android 11. Thank you!
Dont have a pixel 3, but below steps worked on Android 11 device:
Enable developer options and
1. Open Developer Options
2. Turn on Wireless Debugging and click it
3. Click on "Pair device with pairing code"

I have the below errors when I try to run my android project in phone; I already switched "ON" Developer mode and USB Debugging

com.android.ddmlib.AdbCommandRejectedException: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Error while Installing APK
When you first connect a phone to a new computer via USB Debugging, it will pop up a confirmation dialog ont he phone asking if you want to let this device debug. You need to click ok (you may need to toggle USB debugging on and off again to see the dialog again).
Yes, you are right but I got "Because an app is obscuring a permission request, Settings can't verify your response" error when I try to press "OK" in USB debugging popup menu in my phone....
Soluction:
I got this solution,https://www.reddit.com/r/GalaxyS8/comments/81r7xl/because_an_app_is_obscuring_a_permission_request/
What I do:
I uninstall night mode app from my mobile and now I am able to press ok button without any error.., and then app are installed in my mobile phone from Android Studio.

Xiomi Redmi Note 4 phone Install this app via usb, remember my choice coming every time app installation

Using redmi note 4 for mobile automation testig with appium. While executing the tests every time it is asking to install this app via usb and remember my choice radio button. I have enabled following options in developer options:
USB debuging mode: enabled
Install via USB: enabled
USB Debugging (Security settings): enabled
Verify apps over USB: enabled
Turn on MIUI Optimization: disabled
Please share info if you had faced same issue. Thank you enter image description here
Not sure don't enable verify app's over usb and give a try. Thanks.

Install app via usb: The device is temporarily restricted

When I toggle on the install via USB in developer mode:
it will pop the toast message said that the device is temporarily restricted
then toggle off the settings.
Is there any solution for this?
I searched through all the way like turning off MIUI optimization but still does not work. I cannot debug my application by Android Studio in this way......
"Install via USB" wont work if your Xiaomi phone is running MIUI 8 or above. Looks like when you try to Enable this option, your phone trys to connect to some chinese server and fails.
I got a work around and it worked for me. Idea is to connect to Chinese-Shanghai server through VPN. Try the following:
Install PlexVPN from Playstore and login into it. You will get a 24 hr free VPN service.
Select China-Shanghai server and connect.
From developer option in your Xiaomi phone, Enable "Install via USB".
You can then disconnect the VPN and logout from PlexVPN.
Enjoy!!
All you have to do is Turn your Wi-Fi off, turn on mobile data, and then enable the setting for "Install via USB". It'll go through.
Source: http://en.miui.com/thread-544718-1-1.html
For me on a rooted MIUI v.8.5.1 I just need to:
turn off wifi
turn on mobile connection In development options
after doing that both Install via USB and USB debugging started to work.
Try this
Settings -> Additional Settings -> Developer options -> Turn off Miui Optimizations -> Restart
Security -> Permissions -> Gear Icon at top right corner -> Turn On "Install via USB"
Settings -> Additional Settings -> Developer options -> Turn On/Off "USB Debugging" -> Turn On "Install vis USB"
Turning off Wi-Fi and enabling Mobile Data (thank you Xiaomi for wasting my money to enabling mobile data which the last one I didn't have) on Xiaomi 4A did not work for me. Every time I tried to enable Install App Via USB it displayed me "the device is temporarily restricted". So, I found this solution:
Turn on VPN onto your device with these parameters and try again toggle Install from USB:
Server Address: China server from https://www.vpngate.net/en/
IPSec Key: vpn
Username: vpn
Password: vpn
(1) Turn Off your Wi-Fi
(2) Turn On your Mobile Data
(3) Turn On "Install via USB" from Developer Option of your device.
That's all
The Best what I found devices without mobile data in device is to SIGN_OUT from MI_Account in the device and Login Again -> Try to enable USB_Debugging(Security Setting)-> enable INSTALL_VIA_USB
i had same problem with MI Redmi 4a i solved it by ->
first become a developer by clicking on
setting->About phone->MIUI version (7-8 times)
then, setting->additional setting->developer options->USB debugging
Turn on your usb debugging, then in developer options go for last item name is 'Turn on MIUI optimization', turn off this option it will ask for reboot , then reboot device by clicking Turn off & reboot button
after reboot go to Setting->Permissions click on top right menu button Turn on install via USB option
thats it !
These steps worked for me after struggling 1 hour, Not needed to connect to Chinese server.
(1) Turn Off your Wi-Fi
(2) Turn Off your Mobile Data
(3) Turn On "Install via USB" from Developer Option of your device.
4) It will show the Error "No network found"
5) Now Turn On your Mobile Data
6) Again Turn on "Install via USB"
7) it will work, now
Happy!
In MIUI 8.5 it gives the error like you mention while enabling "install via USB", to resolve the error you need to make WIFI off and make mobile data on and then enable the option “Install via USB”. it will work for you.
A detailed blog: http://sforsuresh.in/xiaomi-mi-note-4-install-via-usb-device-temporarily-restricted/
You will need to sign up/sign in for a Mi account before you continue.
1) Extract sim card from your non-Redmi phone. (It should be nano sim. Contact your telecom provider to get one if you have a micro or normal sim).
2) Insert sim card into Redmi phone.
3) Go to Settings -> Additional Settings -> Developer options.
4) Under Debugging, click on 'Install via USB' option.
The phone will enable this.
Remove the sim card.
That's it!! You should now be able to install your apps via USB from Android studio.
Please remember not to disable this option, otherwise, you may need to re-insert your sim card.
PLEASE NOTE: The above steps are guaranteed to work in Xiaomi Redmi 5 phone. Please improve this answer if the steps are different for other models of Xiaomi.
Disable WiFi and switch install via USB on while you are connected through data and under your xiaomi account. It works!
In my case,
I turned on Airplane mode and
turn it off then
turn off Wifi and
turn on mobile data.
Now I can turn on install via USB.
May it helps some one like me.
Please verify your email and phone number in Mi account first then try this:
Settings -> Additional Settings -> Developer options -> Turn off Miui Optimizations -> Restart
Security -> Permissions -> Gear Icon at top right corner -> Turn On "Install via USB"
Settings -> Additional Settings -> Developer options -> Turn On/Off "USB Debugging" -> Turn On "Install vis USB"
Redmi Note 4 (Nougat 7.0, MIUI 9)
For me, options like Turning WiFi off & on, trying on Data Network, or Turning off MIUI Optimization din't work.
Also, the Install via USB never got enabled.
Following steps helped me to install apps via USB
Additional Settings > Developer Options
Here, click on USB Debugging (Security Settings). This will take you through some warning screens. Allow (click on Next/Accept) for all. At the end, it will be enabled.
Now turn on the Install via USB and it gets enabled.
Try to Run the app by connecting your device. If it still doesn't run (as in my case), find Select USB Configuration and select Charging
This worked for me.
Solution with NO VPNing that worked for me:
go to Settings->Accounts->MiAccount->AccountSecurity->Devices
I had a Redmi 9 device listed there (I don't own a Redmi device)
I removed that Device, so now no devices were listed
go back to developer settings, enable install via USB, everything works.
I assume not everyone will have a Redmi device listed there, maybe some will have a different device, maybe some will even have the correct device(this is not something I can test by myself), but it makes sense to me that correcting any wrong devices from that list (or maybe deleting all devices like I did) might fix the problem.
I got this problem in my Xiaomi Mi5 from India. All the mentioned solutions didn't work in my case. Then I tried to figure out the Core reason behind it and solve it. In MIUI, in order to change "Install via USB" option, you must be connected to the internet and signed in your Mi account. Due to some reason, requests from out of the China servers are getting rejected, so I connected to one open China VPN and tried again to enable 'Install via USB' and I got success. For detailed solution and VPN details, see this useful Youtube video: https://youtu.be/MeKUJlD-Ke4
I will write what worked for me, these other solutions did not work out.
switch "Install via USB" to ON,
When the dialog box "Allowing" appear, quick tap your screen out of the dialog box.
Repeat it until u see that "Install via USB" is ON.
After u see "Install Via USB" is ON, you need to re-checking by pressing back button and go to developer option again.
This worked for me. Thanks.
I had this issue on my Redmi Note 4 with MIUI 9. For me the procedure is very simple.
1. Go to Settings -> Permissions -> Gear icon at top right corner.
2. Give the required permission for Install via USB.
3. Goto Developer Options and try using Install via USB. It will work now.
This process is for one time. I hope you have resolved this issue too.
Faced same problem with Xiaomi Mi5 MUI9.
Turning on/off connections or MUI optimization did not work for me.
What worked is:
Settings -> Additional Settings -> Privacy -> enable Unknown sources
In my case when i updated MIUI version to the new available version, resolved the issue.
So check if there is any update available for your device, go to
Settings => About phone => System update
=> here it will shows you the new available MIUI version for your device. So update it then try again.
Note: Turn your Mobile data before enabling install via USB.
In my case, I connect to Chinese VPN, then I turn on install via USB and its work.
I had the exact same problem, tried all the suggested workarounds, but none of them worked for me. Strangely enough, what actually has worked for me was turning on MIUI optimization (it was turned off when the problem occurred)! After turning it on, I was able to toggle on install via USB.
This worked for me:
Go to settings-> Mi Account->Account security
Then verify phone and email, If not added then add and verify that
I tried everything to no result, then read somewhere that you should use VPN and connect under China to unlock your phone's bootloader. Applied the same solution here and it worked!
If turning your Wi-Fi off is not working for you, then you might have not yet registered your MIUI account as a developer account.
To do so go to MIUI Dev center and register your already created account. After the review process this should not be bugging you anymore.
But remember as other have noted to:
Turn off Wi-Fi connection
Turn on mobile connection
In my case,I was using my phone that is Redmi 4 and the usb debugging was not working.It was always giving the message "the device is temporarily restricted" .I have tried all this steps but the result was same.Then I found the foolish thing that I have put the device in charging mode only.When I switch to MTP(Transfer files) and then it started working correctly.I know its a foolish thing but it may help to someone.
if you have root you can force it with adb shell
adb shell
su
setprop persist.security.adbinput 1
Above solutions doesn't work for me. In my case it works by changing Additional settings -> Region to Russia/Some other country.
For me, on Redmi 3s prime with MIUI 9.2, enabling MIUI optimisation on developer menu worked. It caused phone to restart.

DDMS not showing Device name

DDMS is not showing up the Device information in Eclipse which is running on Ubuntu.
Also, i am not getting Logcat messages. I am getting a blank device name. I tried to reset ADB but that didn't help. How to resolve this?
Validate your device is enabled properly:
Settings > Developer Options is visible. If not, you would need to enable it by finding Build number preference, normally in Settings > About Device and tap on it 7 times
Settings > Developer Options - ensure USB Debugging is enabled
slide down system bar and tap on Connected as... (normally media device or camera). Change the value to the other and see if this helps
sometimes a simple USB cable disconnect/reconnect helps
If all above does not help, then issue in USB driver. What device are you refeering?

Categories

Resources