I have OS Catalina, Android Studio 3.5.1 and mobile phone Xiaomi Redmi 7A in order to install and run app in development without emulator, but I cannot connect through USB, EVEN IF I HAVE the USB Debugging already enabled, and also default USB configuration as File Transfer, I also asume I don´t need any USB drivers.
As you can see in the picture below, the unit is being recognized by Android studio but it does not work, Error coming back is " Launching 'app' on Xiaomi Redmi 7A. Installation did not succeed.
The application could not be installed. Installation failed due to: 'device '3aa555fe0106' not found"
Please any help is welcome,
I did lots of testing, even with Stackoverflow proposed solutions, both with Xiaomi Redmi and with Huawei Y9, they did not work for me in anyway to run apps from Android Studio 3.5.1, while other phone brands like Alcatel or even ZTE blade did work with no problem just with activating USB debugging, my conclusion so far is that they get UI layers on top of Android from both manufacturers Xiaomi and Huawei that make it so difficult, so better switch to other brands for runing and testing in development mode
I've just installed VS2015 Community with Xamarin to develop some mobile apps. The problem is, I can't achieve debugging Android apps on any device. Android Device Monitor shows empty list. I tried connecting different phones, which I know are detected on my friend's PC. I can explore their files from windows explorer, from there computer sees them.
USB Debugging on the phone is turned on.
USB connection mode is set to camera, no change at all.
I have Google USB driver installed in Android SDK manager.
I tried adb kill-server, adb start-server. Nothing changed. adb devices
shows empty list.
This is device manager while Developers options are disabled on the phone.
And here with enabled Developers options
I also tried updateing driver to google usb driver, but windows said it's up to date.
You most likely did not grant access to the device. Try to go into the developer settings on the smartphone and revoke the USB debugging authorisation. Then connect the phone to the pc and and wait for a popup on the phone which you should accept. After accepting you should see your device with adb devices.
You can also try to set the connection mode to MTP (instead of the camera PTP).
Hope it helps!
Enable the device for development
Goto: Device > Settings > Developer Options > tick USB debugging
Sometimes just restarting Visual Studio might help
Try the this:
1 - Close Visual Studio
2 - connect your device
3 - Restart visual studio with the device already connected by usb (with the device options checked)
This just happened to me. And it seems setting the startup project to your Android project fixed it.
My understanding is that the Google USB Drivers from the Android SDK Manager only work for Google Nexus devices (at least according to https://developer.android.com/studio/run/win-usb.html); annoyingly enough, to use other kinds of devices you'll probably need to download vendor-specific drivers. For example, I definitely had to download Motorola's drivers to use my Droid for debugging purposes. Unfortunately, for whatever reason Windows wasn't able to automatically detect that that's what it needed to download, so I had to download them manually.
I had the same problem, using a Samsung Galaxy A5
Google Drivers Installed
Samsung Drivers Installed
Phone shows up in file explorer
Plugging the phone in while Visual Studio was opened resulted in a pop up asking for permission. After authorising, everything worked perfectly. I didn't have to go into the developer settings on the smartphone and revoke the USB debugging authorisation.
To preface, I had connected my phone (a blackberry which had Android and full Google Play Store access) via Android Studio before so I KNOW it's possible, but when I was trying to do it with Xamarin I was having issues, Visual Studio just wouldn't recognize my device.
Found the problem appears to be the USB cable I was using. When I standardly plug in the USB, blackberry gives me the option to just charge the phone, or to enable File Transferring. But the first cable I was using always just charged the phone and didn't give me options. I tried switching the usb cable and voila, I got the prompt, and I can see the device now in the Start Debugging dropdown. So it looks like there's charge-only usb cables as well as Data cables. Be sure you're using a Data cable else it won't be able to see your Device
I had the same issue after updating Visual Studio found that in recent versions is better if you open VS in administrator mode to properly work, this should fix the problem.
I had previously revoked debug auth on my phone, but my phone didn't prompt me to allow debugging on my PC when I connected it again. Ended-up restarting my LG V30 while connected to my PC and I was prompted to allow debugging.
After that, Visual Studio 2019 version 16.10.0 adds my phone to the device list.
Running on Windows 11. Visual Studio 2022. But, I don't think the versions are really relevant here - included for completeness.
Followed all instructions re enabling USB debugging from the device. Also, the USB Drivers for my Samsung device were successfully installed on the Windows machine.
I was running the Duet Display application as I had previously installed it for use with my iOS devices. This appears to have created a conflict when connecting the Android device, as the prompt related to Duet would appear but not the prompt to allow USB debugging from the computer along with the RSA thumbprint. Once I exited the Duet app from my system tray and reconnected the Android device I got the prompt and it immediately appeared in Visual Studio 2022.
Here's some things I check when having an issue with Android device not appearing:
Enable developer mode on the device from settings
Install (e.g. to windows) the manufacturer's* developer USB drivers for the device
Ensure the Minimum Android Version in the AndroidManifest.xml is lower or equal to your device
And as always, try a different lead and restart both PC and Device!!
*Manufacturer Android USB Development driver links I know of:
Sony | Samsung | Google/Nexus | Blackberry
I have just updated from VS2015 (14.0.25402.00 Update 3) to VS2017 (15.7.5).
Amongst other things, I had to migrate a .forms app from 2.3.x to 3.1.x...
As it (according to MS) now should be possible to install also the Xamarin integration software in parallel to older versions of VS, I first (for security reasons) wanted to leave my “old” .forms app under VS2015 and .forms 2.3x and start to update to .forms 3.x with VS2017.
First, everything looked good - I was able to open my “old” .forms 2.3.x project in VS2015 (what was not possible in the earlier migration from VS2013 to VS2015).
But, I was not able to bring my two dev mobiles (both Samsung Galaxy S7) to work under VS2015 again, although, they were showed to my dev-machine (windows explorer) correct.
After wasting about a full day (doing every suggested workaround, I found on the web), I gave up und started to migrate the .forms project under VS2017.
Under VS2017 both mobiles were showed immediately without any problems and I was able to debug to the device.
So.. it seems, as the installation of VS2017 (with Xamarin integration SW) has “destroyed” something in the VS2015 installation regarding the access to the mobile devices...
I wasn't getting the USB debugging prompt on the device to trust the PC it was connected to and it wasn't appearing in the drop down list of devices in Visual Studio or ADB. Tried many things but installing the USB driver for the device (in my case Sony Xperia XA1 from: https://developer.sony.com/develop/drivers/
After installing this device driver by right-clicking the ADB Interface device in Device Manager and choosing the downloaded driver it showed the prompt to allow the PC and now works fine. This was on Windows 8.1 . I don't remember having to do the same for my Windows 10 PC.
I tried all the options but the only way I got it working is to unplug the USB cable and connect it on a different USB port.
After downloading phone specific drivers and restarting computer / restarting visual studio etc etc. What fixed it for me was from developer options
Disable USB Debugging
Enable USB Debugging
This was on a Samsung Galaxy, looks like although it was saying USB debugging was enabled it was in fact not enabled until I retriggered it using the above method.
I am developing apps in Android Studio and I can run them in the virtual device succesfully. However running the apps on my own device (Samsung S3 GT-I9300) doesn't work.
Based on the documentation of Google (http://developer.android.com/tools/device.html) I have tried this:
In the application tag of the AndroidManifest.xml I have added: android:debuggable="true".
Installed the latest OEM driver from the Samsung Website
In the Android Studio I changed in the Edit Configurations the target device into USB device. But I constantly get this message:
Waiting for device.
USB device not found
I also have installed Kies software from Samsung and with this software I can connect my phone by USB. I have also tried adb devices in \sdk\platform-tools, but no devices are listed.
I have solved the problem! I didn't enable USB debugging in the settings.
For Mac user, just restart your mac after installing android studio. Check Choose a running device at Device Chooser interface, you can see your device in the list.
http://developer.android.com/training/basics/firstapp/running-app.html
I have a Samsung Galaxy S Advanced that I want to use to test my Android applications on. Just recently, I switched to Windows 8. Everything appeared to be working fine, Windows 8 detected my device fine however, the device was not list when I ran adb devices. I know I set-up the phone correctly, enabling USB debugging in the developer settings.
This problem can be fixed by installing the official Samsung USB Mobile Phone driver. You can find this driver at the official Samsung site: http://www.samsung.com/nl/support/model/GT-I9100LKATNL-downloads After installing this driver, your device will show up in adb devices
I want to debug Android app on Samsung gts5360 device via Windows 7. USB debugging on Android side is enabled, but device is not showing in Eclipse when connected. I had no such problems in Ubuntu.
So please suggest me how to debug apps on Android device via Window 7?
Try resetting the adb. I usually run Dalvik Debug Monitor in the background when using connected devices, so I can verify that the AVD and/or devices really are registered. You'll find this tool in C:\Program Files (x86)\android-sdk\tools or wherever you have your Android SDK installed. It's called ddms.exe.
If you don't see your device there, go to the menu Actions --> Reset asb. Now, all AVDs and devices should popup, and it will be available in Eclipse. At least, this works for me.