How to know which Emulator image will contain su?
I can see that often it only contains su or google play
Run adb root and you get a root shell ... otherwise su needs to be manually installed.
However, when already having a root shell available, installing it isn't much of a problem.
All images are rooted, but SDK apps requesting escalation of privileges do rely upon su.
This question here generally duplicates: How to get root access on Android emulator?
adb shell scripting must:
start the emulator
run adb root
run adb shell
remount system partition
adb push the su binary
chmod to set permissions
exit
Or to answer the question:
start the emulator
and check if the file exists, eg. with adb shell stat /usr/bin/su
Where stat gives this response, when it's not installed:
stat: '/usr/bin/su': No such file or directory
One could even loop all Android images installed in $ANDROID_SDK_HOME...
there's no "one click" solution, but adb can be fully automated with Bash or Batch. And one wouldn't even have to run the emulator, but can mount QCOW2 as a nbd network block device.
Related
My phone Samsung Galaxy S5 mini is rooted. I'm trying to pull files from /data/data/myapp.package/ to folder on my PC.
adb pull /data/data/myapp.package E:\myapp\myapp.package
it gives me this error
adb: error: failed to copy '/data/data/myapp.package' to 'E:\myapp\myapp.package': Permission denied
I found many questions like mine but no answer solved my problem. Some suggested to execute this command adb root before pulling files. Some suggested to install adbd insecure app to enable root access. In fact after installing that app, phone disappeared from adb terminal. Both solution didn't work for me.
BTW, I can copy files using cp command from adb shell but I have to copy files to sdcard and then pull from sdcard. I'm looking for solution which allows me to copy files directly from /data/data/myapp.package to my PC
Any solution?
For your adb to be able to access /data/data directly (for adb pull), your adbd should be running as root - which can generally be done by adb root command.
adb root would not work on commercial devices like Samsung Galaxy S5 mini as commercial devices have ro.secure=1, i.e., the adbd can't be restarted as root due to a check of property called ro.secure. adbd insecure app circumvents this and restarts adbd in root mode to enable adb pull, etc. to work.
In short, if adbd insecure app doesn't work for you, it's not possible to do adb pull from /data/data in your existing ROM. It might be possible if you change the ROM / do some boot.img tweaks, but I would probably suggest trying latest version / different versions of adbd insecure app before going for ROM changes.
Read more on rooting here.
First you need to hit these two command from command line
adb root
adb remount
then
adb pull /data/data/myapp.package E:\myapp\myapp.package
This is my example pulling DB file from the root directory
adb -e shell "run-as com.example.project cp /data/data/com.example.project/databases/project.db /sdcard"
The key is run-as
Here's a one-liner that lets you pull a file without installing anything else and without having to copy it to a public location on the device to then pull it to your computer:
adb exec-out su -c cat /data/data/myapp.package/my_file.apk > my_file.apk
What this does:
adb exec-out runs a command and outputs the raw binary output
su -c runs the provided command as root
cat <file> prints out the file contents
> <file> redirects the output from adb (i.e. the raw file contents) to a local file.
I'm trying to use the Android Adb Command Prompt to copy a folder inside the app container to a local Windows folder. The device is running Android 5.1.1 and is not rooted.
adb pull or cp aren't working. How can I copy a folder?
The following approaches aren't working:
Approach 1
adb shell
adb pull /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs C:/temp/test
error: device not found
Inside the shell you can't see to do adb pull. See here.
Approach 2
DDMS can't access the data folder.
Approach 3
adb shell
run-as DroidSample.DroidSample
cp /files/MetroLog/MetroLogs/ C:/temp/test
cp: /files/MetroLog/MetroLogs/: No such file or directory
Approach 4
adb shell
run-as DroidSample.DroidSample
cp /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs/ C:/temp/test
cp: /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs is a directory (not copied).
This is also not working.
Approach 5
adb shell
run-as DroidSample.DroidSample
chmod 777 /files/MetroLog/MetroLogs
exit
exit
adb pull /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs C:/temp/test
adb shell run-as DroidSample.DroidSample
chmod 700 /files/MetroLog/Metrologs
remote object '/data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs' does not exist
So also this isn't working.
Approach 6
adb shell
mkdir /sdcard/tmp
cp /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs /sdcard/tmp
cp: /data/data/DroidSample.DroidSample/files/MetroLog/MetroLogs: Permission denied
This is also not working.
Approach 7
The only thing which half work is this
adb exec-out run-as DroidSample.DroidSample cat "files/MetroLog/MetroLogs/Log - 20160509.log" > C:/temp/test/test.log
But here I don't get the original file and I also have to know the exact file name. Additionally, that I loose line breaks and I have to do this for each file. Not that what I want.
So I'm running out of ideas. How can I access the internal stored files and copy them over?
You have almost solved the problem. As the storage of this kind is secured, you need to do one additional step. You need to copy the file from secured location to sdcard of the device. And then you can copy it anywhere via usb or android pull. Here are the command sequence I executed successfully.
adb shell
run-as DroidSample.DroidSample
cd shared_prefs
cp DroidSample.DroidSample_preferences.xml /sdcard/DroidSample.DroidSample_preferences.xml
exit
exit
adb pull /sdcard/DroidSample.DroidSample_preferences.xml C:/test/
That's it.
And I really appreciate the way you posted your question. Best of luck.
You're trying to gain read access to /data partition on actual android device. Such thing is not possible without root access, even if the app folder is yours. For the reason that permissions to read /data partition are not granted and cannot be granted, unless you're using an emulator. On emulator, which by default is with admin privileges for developer, you can access the data partition to read and write. On actual device you cannot. Not with adb, not with DDMS.
So basically speaking, anything that requires access to those files under /data is not going to work. Whether you sue cp command or pull command. The moment your kernel reads the beginning of your path which starts with /data/... it says: Oops, no can do.
You are trying to access /data folder of android device which is not accessible in unrooted device.
I am currently using 'Visual Studio Emulator for Android' to run android apps on my computer, i find that after using multiple types of emulators bluestacks, genymotion, andy etc. That VS is the most stable and easy-to-use out of them all.
The only problem that i have compared to the other emulators is running apps that require root permission, with this being an emulator i know that its not possible to go the route of rooting via fastboot/recovery, this is the only method i know of rooting as thats how i normally do it on my phone.
I have tried most of the 'rooting' APK's (kingo,towel,frama etc) and none of those have worked.
So would anybody happen to know how i can get root access on Visual Studio Android Emulator?
I am trying to run a touch-replication app (Frep & RepetiTouch) but all of them seem to require root access.
Any advice would be much appreciated. Thanks
Yes, you can. Here are some basics before the steps. Fundamentally all Visual Studio Emulator has root access; if you do adb shell you will get a root prompt. The only thing that is missing is the su binary and access for applications to connect to root shell through su. You can get the su binary from superuser apk from clockworkmod and the access to the root shell through the su daemon.
Installing su binary
Download superuser apk from clockworkmod. Ideal way is to download the app from google play store and navigate to /data/app/ and copy com.koushikdutta.superuser to your pc through adb pull /data/app/com.koushikdutta.superuser <local_path_in_your_system>
Change the .apk extension to .zip.
Navigate to assets/x86/ and copy the su binary to /system/xbin in your emulator
adb push <location_of_su> /system/xbin
chmod with suid and rwx
adb shell
chmod 6777 /system/xbin/su
symlink to /system/bin
ln -s /system/xbin/su /system/bin/su
Run the su daemon
/system/xbin/su --daemon
Giving Access to Applications through su
Install the superuser binary by either dragging and dropping into
the emulator or using adb install <path_to_superuser_apk>
Download rootchecker free\basic or even a terminal emulator for that
matter. We just want to check if our device is rooted.
Run the rootchecker app to check root and you should be able to get
the prompt from superuser.
I rooted my unlocked Galaxy S3 (SGH-T999)
Now, I'm trying to run adb root from Windows Command Prompt, however, I'm getting adbd cannot run as root in production builds error. So, the very first thing I checked was whether my phone was really rooted?
So I tried the following:
Open Command prompt
$adb devices // lists my device
$adb shell //goes to shell
$su // opens a 'SuperSu' prompt on my phone and I 'Grant' permission
# // Before following the rooting instructions, I was getting 'no su command found' in the previous step. So, I believe my phone is ROOTED. **Correct me if I'm wrong.**
However, when I do adb root, I get adbd cannot run as root in production builds error.
So, I thought, I might have to do some additional stuff beyond what I did above. I tried all the solutions in the following SO questions:
Launch a script as root through ADB
adb remount permission denied, but able to access super user in shell -- android
Unable to run 'adb root' on a rooted Android phone
None of the above worked for me. All they do is give the ROOT access INSIDE of SHELL. I want adb root to work so that I can execute various adb commands WITHOUT going into shell.
By design adb root command works in development builds only (i.e. eng and userdebug which have ro.debuggable=1 by default). So to enable the adb root command on your otherwise rooted device just add the ro.debuggable=1 line to one of the following files:
/system/build.prop
/system/default.prop
/data/local.prop
If you want adb shell to start as root by default - then add ro.secure=0 as well.
Alternatively you could use modified adbd binary (which does not check for ro.debuggable)
From https://android.googlesource.com/platform/system/core/+/master/adb/daemon/main.cpp
#if defined(ALLOW_ADBD_ROOT)
// The properties that affect `adb root` and `adb unroot` are ro.secure and
// ro.debuggable. In this context the names don't make the expected behavior
// particularly obvious.
//
// ro.debuggable:
// Allowed to become root, but not necessarily the default. Set to 1 on
// eng and userdebug builds.
//
// ro.secure:
// Drop privileges by default. Set to 1 on userdebug and user builds.
In some developer-friendly ROMs you could just enable Root Access in Settings > Developer option > Root access. After that adb root becomes available. Unfortunately it does not work for most stock ROMs on the market.
I ran into this issue when trying to root the emulator, I found out it was because I was running the Nexus 5x emulator which had Google Play on it. Created a different emulator that didn't have google play and adb root will root the device for you. Hope this helps someone.
I use for enter su mode in abd shell
adb shell "su"
I have a rooted Samsung Galaxy Trend Plus (GT-S7580).
Running 'adb root' gives me the same 'adbd cannot run as root in production builds' error.
For devices that have Developer Options -> Root access, choose "ADB only" to provide adb root access to the device (as suggested by NgaNguyenDuy).
Then try to run the command as per the solution at Launch a script as root through ADB.
In my case, I just wanted to run the 'netcfg rndis0 dhcp' command, and I did it this way:
adb shell "su -c netcfg rndis0 dhcp"
Please check whether you are making any mistakes while running it this way.
If it still does not work, check whether you rooted the device correctly.
If still no luck, try installing a custom ROM such as Cyanogen Mod in order for 'adb root' to work.
You need to replace the adbd binary in the boot.img/sbin/ folder to one that is su capable. You will also have to make some default.prop edits too.
Samsung seems to make this more difficult than other vendors. I have some adbd binaries you can try but it will require the knowledge of de-compiling and re-compiling the boot.img with the new binary. Also, if you have a locked bootloader... this is not gonna happen.
Also Chainfire has an app that will grant adbd root permission in the play store: https://play.google.com/store/apps/details?id=eu.chainfire.adbd&hl=en
Lastly, if you are trying to write a windows script with SU permissions you can do this buy using the following command style... However, you will at least need to grant (on the phone) SU permissions the frist time its ran...
adb shell "su -c ls" <-list working directory with su rights.
adb shell "su -c echo anytext > /data/test.file"
These are just some examples. If you state specifically what you are trying to accomplish I may be able to give more specific advice
-scosler
adbd has a compilation flag/option to enable root access: ALLOW_ADBD_ROOT=1.
Up to Android 9: If adbd on your device is compiled without that flag, it will always drop privileges when starting up and thus "adb root" will not help at all.
I had to patch the calls to setuid(), setgid(), setgroups() and the capability drops out of the binary myself to get a permanently rooted adbd on my ebook reader.
With Android 10 this changed; when the phone/tablet is unlocked (ro.boot.verifiedbootstate == "orange"), then adb root mode is possible in any case.
If you really need to have ADB running as root, the quickest and easiest way is to install Android Custom ROMs and the most popular is CyanogenMod for it has the Root Access options in developer options menu where you can choose to give root access to apps and ADB. I used CM before but since it wasn't developed anymore, I tried looking for some solutions out there. Although CyanogenMod is still a good alternative because it does not have bloatware.
One alternative I found out from a friend is using adbd insecure app which you could try from here: https://forum.xda-developers.com/showthread.php?t=1687590. In my case, it works perferct with an Android custom kernel, but not with the Android stock ROM (vanilla android only). You may try other alternatives too like modifying boot.img of the Android ROM.
in my case, ( device is rooted )
linux$ adb shell # in linux shell
mobile$ su root #=> notice the $ will become #
mobile# whoami #=> root
if you installed "adb root" module in Magisk, you still have to manually switch to root by su root, otherwise, it just LOOKS LIKE you are root, but actually you are NOT root.
I have a Samsung Galaxy Tab S2 running Android 7.0.
Here's how I rooted it today:
Root the device using Odin
Read Alex P.'s answer in this thread regarding editing system\build.prop file.
download onto your tablet: v1.3.9 System Tools Android: All-In-One toolbox
run the app; under "System Utilities" confirm your Odin root worked using "Root Check"
in the same app goto "Root Manager" and use the "Build.prop editor" to effect the changes in the system\build.prop (as specified by Alex P.).
Final Confirmation:
C:\Android\sdk\platform-tools>adb shell
gts28vewifi:/ $ whoami
shell
gts28vewifi:/ $ su
gts28vewifi:/ # su root
gts28vewifi:/ # whoami
root
Upvote Alex P.'s answer.
Further info
and here
and here too
Root Access in Windows Command: adb shell su
Root Access in MacOS Command: ./adb shell su
This is a recurrent question, and it seems it has several reasons. I cannot discover mine, even after googling. Several people had answered this question, though.
The problem is that when I try to run an android project with Eclipse and ADB, I get:
Failed to get the adb version: Cannot run program "/extraHD/android/android-sdk-linux/platform-tools/adb":
error=13, Permission denied from '/extraHD/android/android-sdk-linux/platform-tools/adb'
- exists=true
Some data:
1) /extraHD is my second HD, 180GB free, where I have full permissions
2) adb executable has full permission 777
3) If, after 'cd /extraHD/android/android-sdk-linux/platform-tools', I run any of these (no adb process running):
./adb
./adb shell
./adb start-server
./adb kill-server
./adb shell kill you
./adb root
./adb remount
I get the very same answer:
bash: ./adb: Permission denied
And same answer when executing as root! I can create/delete files in that directory, even as a normal user...
Same problem after reinstalling ADB, both through Eclipse and zip file.
Rebooting didn't work either.
I get the same problem with /extraHD/android/android-sdk-linux//tools/emulator.
Tried fsck, reinstalled Eclipse, reinstalled Tools and Platform-tools (adb in particular), reinstalled the APIs. Same thing.
Clues??
I had a similar problem and I solved it by doing the following (mounting the sdk partition at boot time and changing permissions in fstab in order to allow writing in Windows NTFS partition):
Open a terminal, you can use Ctrl+Alt+t
Use 'blkid' to list the block devices and print the universally unique identifiers (UUID)
sudo blkid
Locate the line with the label of your SDK partition and copy the UUID value:
/dev/sXX: LABEL="secondHD" UUID="copy_this" TYPE="ntfs"
Add a new line at the end of the fstab file so the partition will be mounted during boot:
sudo gedit /etc/fstab
Remember to customize the "your.." values, the order it's important, fields on each line are separated by tabs or space; type man fstab for further information). Save and exit.
UUID="yourValueCopied" "yourPartitionPath&Name" ntfs users,uid="YourGroup",gid="YourUserGroup",umask=0022,exec,permissions,auto 0 2
Restart the computer and try another time adb :)
Seems that It's a ntfs partition issue:
https://askubuntu.com/questions/207180/changing-permissions-in-fstab-in-order-to-allow-writing-in-windows-ntfs-partitio
A very good explanation of fstab-permission-masks:
http://www.omaroid.com/fstab-permission-masks-explained/