There are some exceptions when debugging .NET MAUI on Android which are harmless and I want to ignore them.
For example System.IO.FileNotFoundException during startup, somewhere in MAUI libraries possibly.
Eventhough the exceptions IS ignored in VS Exception Settings the debugger still breaks on the exceptions for some reason. This happens only in a MAUI project.
If I choose to ignore all CLR exceptions then all exceptions are really ignored...but that's hardly what I want, I just want to ignore this particular exception which is not ignored eventhough it's unchecked.
Has anyone found a way to make VS correctly ignore exceptions?
Current Visual Studio IDE can ignore specific exceptions as required.
The steps is :
Debug-->Windows-->Exception settings
You can record the previous exception's name and search under it and then uncheck it.
After that, please uncheck Just My Code option, otherwise the exception may still be interrupted.
Tools-->Options-->Debugging-->General-->Just My Code
Related
Obviously with code, errors can occur anywhere. So without having try/catch blocks all over the place (which as I understand it is major overhead) how do I allow errors to bubble up to the application level and then handle them there? Or at the very least, record the error somehow for troubleshooting? I found information on an product called ACRA, but the setup instructions are geared for Eclipse projects. I am using Mono for Android in Visual Studio 2010.
That's a bit of an "It depends" question.
The appropriate handling of an errors is going to depend on what the recovery strategy needs to be, how much information you want the user to see etc.
I wouldn't worry how many Try/Catch blocks you use - just use them wherever you need to handle an error that gets thrown - if they're everywhere, your strategy is probably wrong.
It terms of logging and later interrogation, you can log caught errors using the Android.Util.Log class.
These can be interrogated (provided you're debugging on your own device) using Logcat.
There's some more info on logging and Logcat here.
Found this project that writes crash info to google docs. Android Crasher
I'm primarily a C#/VS dev, but will be debugging an Android application in the near future. I can't seem to find a setting in eclipse that will cause it to break into the debugger when an exception occurs (regardless of whether there is an exception handler handling it).
This feature is available in visual studio via the Debug > Exceptions menu.
Is there anything similar in eclipse? otherwise, how does one figure out the source of an exception assuming limited initial knowledge of the codebase?
I don't know whether this also applies to Android debugging, but the feature is available for Java. In Eclipse, switch to the "debug" perspective. In the "Breakpoint" view, you will notice a little icon (at the top right, near the "minimize" button of the view) with a J and an exclamation point. This is the trigger to add "exception" breakpoints.
With this dialog, you can tell the debugger to suspend and caught and uncaught exceptions alike.
how does one figure out the source of an exception assuming limited initial knowledge of the codebase
Inspectind stack trace you can find the line that causes exception. So you can wrap this come with try/catch and pus breakpoint to catch.
You should declare a project debuggable in the AndroidManifest.xml Second, the debugger should have a break point where you wan't to inspect the code. When starting the project in debugger in eclipse, the view will automatically jump to debugger as it hits a break point.
Hope this helps!
I have just started doing Android development on Mac OS X in Eclipse. When debugging an Activity, I keep getting the following errors:
The JAR file /platforms/android-10/android.jar has no source attachment.
This is starting to get very annoying, does it mean something is throwing an exception somewhere? (the message itself does not give any meaningful information as to why this is happening) I do not want to step into the source; does Eclipse do this by default? How do I disable it?
It looks like you have some error in your application. And Android subsystem throws exception. Normally, if such exception originates from android, you'll see this behavior.
What you should do:
Turn on LogCat view to see logs.
Launch your app without debugger (Ctrl+F11 on ubuntu/windows)
Inspect those logs in LogCat very carefully. They will contain the place where exception happened (originating from your code). You will then easily be able to fix the issue yourself (or ask for more assistance if needed).
In a normal development workflow you shouldn't hit cases like yours too often. Its just the learning curve :) So stay calm and keep learning.
Please note, unlike many other questions having the subject title "application has stopped unexpectedly", I am not asking for troubleshooting a particular problem.
Rather, I am asking for an outline of the best strategy for an Android/Eclipse/Java rookie to tackle this formidable task of digesting huge amounts of information in order to develop (and debug!) a simple Android application.
In my case, I took the sample skeleton app from the SDK, modified it slightly and what did I get the moment I try to run it?
The application
(process.com.example.android.skeletonapp)
has stopped unexpectedly. Please try
again.
OK, so I know that I have to look LogCat. It's full of timestamped lines staring at me... What do I do now? What do I need to look for?
Is there a way to single-step the program, to find the statement that makes the app crash? (I thought Java programs never crash, but apparently I was mistaken)
How do I place a breakpoint?
Can you recommend an Android debug tutorial online, other than this one?
I'm an Eclipse/Android beginner as well, but hopefully my simple debugging process can help...
You set breakpoints in Eclipse by right-clicking next to the line you want to break at and selecting "Toggle Breakpoint". From there you'll want to select "Debug" rather than the standard "Run", which will allow you to step through and so on. Use the filters provided by LogCat (referenced in your tutorial) so you can target the messages you want rather than wading through all the output. That will (hopefully) go a long way in helping you make sense of your errors.
As for other good tutorials, I was searching around for a few myself, but didn't manage to find any gems yet.
Filter your log to just Error and look for FATAL EXCEPTION
If you use the Logcat display inside the 'debug' perspective in Eclipse the lines are colour-coded. It's pretty easy to find what made your app crash because it's usually in red.
The Java (or Dalvik) virtual machine should never crash, but if your program throws an exception and does not catch it the VM will terminate your program, which is the 'crash' you are seeing.
Check whether your app has the needed permissions.I was also getting the same error and I checked the logcat debug log which showed this:
04-15 13:38:25.387: E/AndroidRuntime(694): java.lang.SecurityException: Permission Denial: starting Intent { act=android.intent.action.CALL dat=tel:555-555-5555 cmp=com.android.phone/.OutgoingCallBroadcaster } from ProcessRecord{44068640 694:rahulserver.test/10055} (pid=694, uid=10055) requires android.permission.CALL_PHONE
I then gave the needed permission in my android-manifest which worked for me.
From the Home screen, press the Menu key.
List item
Touch Settings.
Touch Applications.
Touch Manage Applications.
Touch All.
Select the application that is having issues.
Touch Clear data and Clear cache if they are available. This resets the app as if it was new, and may delete personal data stored in the app.
Try the following:
Create a HelloWorld application.
Add a Log statement to the end of onCreate:
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
Log.d("HelloWorldActivity.onCreate()", "setContentView() completed");
}
Place a breakpoint on the Log statement.
Run the app in the emulator and note it works and step to see the Logged entry in the LogCat window of Eclipse.
Change the HelloWorldActivity to extend from ListActivity instead of Activity.
public class HelloWorldActivity extends ListActivity {
Run the app in the emulator again and note it fails to reach the Log statement.
My question is NOT why this fails. My question is, how would you go about debugging this failure? All I see in the Eclipse Debug pane is a RuntimeException. I see LogCat has a bunch of messages, but it's huge and I've searched it but can't find anything to indicate what's wrong or where in my code the exception happened. I can't find a way to display the message inside the RuntimeException or a stack trace to know which line of code initiated the exception.
I assume there must be better ways to use the tools to find errors, but I'm new and can't seem to figure out a better way to debug besides wrapping everything I code in a try/catch. I would have expected to find a message in LogCat generated by the throwing of the exception. I would have expected the Debug window to allow you to inspect the exception's contents. I'm not saying that such techniques don't exist, I'm saying I'm having trouble figuring out as a beginner how to debug and asking what techniques do exist and how do I use them?
So, simply put:
How would you find this error if you didn't already know what was causing it?
What techniques would you use to find out the root cause?
How would you go about inspecting the Exception's details?
Generally, how do you find problems in your Android code using Eclipse?
Multiple suggestions and discussion are welcomed. :)
I would have included my LogCat contents, but it's so large that's not reasonable. You should be able to easily reproduce this yourself, so I left it out. It is possible something is in LogCat to help me, but because it's so large with even running a small program, I would need a hint as to what to search for and how to interpret it when hitting an exception thrown from an API call. I see other posts that state something should be in LogCat, which while might be true, I'm not finding anything myself. If you think something should be in LogCat, please run the test yourself and copy the lines into your response that I should be finding.
Thanks.
========
Summary techniques list so far is as follows:
Invasive Techniques:
1. Place a Toast in code locations where you want to see you you've executed.
2. Place try/catch around code where you think there's a possibility of an Exception being thrown.
3. Comment out code and recompile and retest.
Non-Invasive Techniques:
1. Use the debugger. Breakpoints, variable inspection...
2. Monkey stress tester.
3. Download Android source library.
4. Use LogCat filters to see if a "Caused By" is listed.
Unclear if Available:
1. Debug version of Android library that has additional logging, assertions or other additional help.
2. Ability to inspect an Exception in Eclipse through the Debug pane or other techniques.
3. A way to define a more global try/catch exception handler.
4. Ability to debug through the Android library source code.
Not Available:
1. A non-invasive way to view the contents of an Exception or where the Exception happened.
hey,
Ineresting question. Well, first tip, you can filter what logcat tells you. For instance, you make it just show you errors by clickin in the red (e).
It also tells you where the error happened if you run your app in debug mode. It can either point you directly to your code or to android sdk. Knowing what android package caused the error is a big help.
These two just pop into my mind. hope it helps!
I was running into the same issue and found the following by Steve H. that helped out:
What happens is that when the debugger
is attached, the exception logs don't
get posted to LogCat until you
terminate the application from within
the Debug perspective. This happens
because the application doesn't
actually crash until the debugger
detaches. – Steve H Mar 31 at 15:47
------ yup, that did it. Now I see the same exception. AFTER I let the
program run through it's full crash
and exit process. It should display
that info when it halts my program and
brings up the IDE debugger screens.
Not leave me wondering and wasting my
time with more clicking around.
Eclipse has a long way to go it seems
to compete with the likes of Visual
Studio. Let's hope my patience for it
outlasts my project. Thanks for the
feedback. :) – Sebastian Dwornik Mar
31 at 17:35
Link to Question: What's wrong with debugging in Eclipse on Android?
Generally if anything throws an exception then you should probably be catering for that situation anyway, however putting try/catch blocks is a decent way of finding the specific problem.
I've found that if you don't put something in the catch block then you can't evaluate the exception in the watch variables window in eclipse. So i always put a Log call in and set a break point on that line.
public void onCreate(Bundle savedInstanceState) {
try{
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
}catch(Exception exception)
{
// put break point on line below so you can evaluate exception in debug mode.
Log.e(TAG, "Set content exception "+ exception.getMessage());
// note some exceptions return null on getMessage();
}
Log.d("HelloWorldActivity.onCreate()", "setContentView() completed");
}
So if your stack trace is huge then this will help. Other developers have also found that getting the source code for the sdk means you can view where the error is thrown in the main sdk code. I've not done this though.
Exceptions not caught with try/catch are errors and break the normal flow of the program.
Running in debug mode is just clicking in the bug button. I don't know if there are any "special" debug libraries. But when working with android, all "libraries" are open source so you can pretty much view anything.
The good thing about debug mode is that when an error occurs, your app is frozen right in the limbo when the error occurs. You can set set breakpoints, change your code on the fly while your program is running, which is great (Well, you can't make drastic changes like changing a method name).
The way you treat bugs and errors in android, however, can be a bit different from .NET, since the model in each one is different.
When programming to windows, apps work like small islands. You have a much direct control over the code flow (ie: you can call a modal dialog to freeze codeflow while a user inputs some data) and you can make a totally functional program using just one thread. In android almost everything runs in it's own sync. And your app must be prepared to handle stuff like receiving a phone call in the middle of execution. So, you can apply this model to debugging also: Errors (that happen due to unforsen circumstances) tend to propagate much more than in other development ambient. The way those errors are handled is different too: this is apparent when you realize that your app still runs even after throwing an exception.
Some more useful tips:
You have a very powerful tool called Monkey, a stress tool that generates "pseudo-random streams of user events such as clicks, touches, or gestures, as well as a number of system-
level events".
LogCat indicates you the "cause" of the error. The line usually starts with Caused By. If you're interested in the cause rather than the consequence, you can further filter your error reports looking for "Caused by".
Last but not least, I find the old method of commenting lines and see what happens very useful to figure things out.
hope it helps