I need to read/write to a smart-card using a smart-card reader attached to an Android phone by USB.
Is this possible with native APIs or do I have to install other libraries?
Thank you
In java the communication takes place using package javax.smarcard which is not available for Android so take a look here for getting an idea as to how you can communicate or send/receive APDU (smartcard command).
Using the USB Host API to connect :
:
//Allows you to enumerate and communicate with connected USB devices.
UsbManager mUsbManager = (UsbManager) getSystemService(Context.USB_SERVICE);
//Explicitly asking for permission
final String ACTION_USB_PERMISSION = "com.android.example.USB_PERMISSION";
PendingIntent mPermissionIntent = PendingIntent.getBroadcast(this, 0, new Intent(ACTION_USB_PERMISSION), 0);
HashMap<String, UsbDevice> deviceList = mUsbManager.getDeviceList();
UsbDevice device = deviceList.get("//the device you want to work with");
if (device != null) {
mUsbManager.requestPermission(device, mPermissionIntent);
}
And now you will need endpoints, simply send an APDU (smartcard command) over the bulk-out endpoint and expect to receive a response APDU over the bulk-in endpoint.
Code to get endpoints ::
UsbEndpoint epOut = null, epIn = null;
UsbInterface usbInterface;
UsbDeviceConnection connection = mUsbManager.openDevice(device);
for (int i = 0; i < device.getInterfaceCount(); i++) {
usbInterface = device.getInterface(i);
connection.claimInterface(usbInterface, true);
for (int j = 0; j < usbInterface.getEndpointCount(); j++) {
UsbEndpoint ep = usbInterface.getEndpoint(j);
if (ep.getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) {
if (ep.getDirection() == UsbConstants.USB_DIR_OUT) {
// from host to device
epOut = ep;
} else if (ep.getDirection() == UsbConstants.USB_DIR_IN) {
// from device to host
epIn = ep;
}
}
}
}
To send commands use this :
public void write(UsbDeviceConnection connection, UsbEndpoint epOut, byte[] command) {
result = new StringBuilder();
connection.bulkTransfer(epOut, command, command.length, TIMEOUT);
//For Printing logs you can use result variable
for (byte bb : command) {
result.append(String.format(" %02X ", bb));
}
}
And to read data or send binary read you can use this code:
public int read(UsbDeviceConnection connection, UsbEndpoint epIn) {
result = new StringBuilder();
final byte[] buffer = new byte[epIn.getMaxPacketSize()];
int byteCount = 0;
byteCount = connection.bulkTransfer(epIn, buffer, buffer.length, TIMEOUT);
//For Printing logs you can use result variable
if (byteCount >= 0) {
for (byte bb : buffer) {
result.append(String.format(" %02X ", bb));
}
//Buffer received was : result.toString()
} else {
//Something went wrong as count was : " + byteCount
}
return byteCount;
}
Now let's take an example of this command like the one here: 62000000000000000000 How you can send this is :
write(connection, epOut, "62000000000000000000");
Now after you have successfully sent the APDU command, you can read the response using :
read(connection, epIn);
And receive something like
80 18000000 00 00 00 00 00 3BBF11008131FE45455041000000000000000000000000F1
Now the response received in the code here will be in the result variable of read() method.And likewise you can write your own commands for communicating.
Sadly there is no abstraction layer like PC/SC in the native Android system. But you can utilize Android USB library to talk directly to the USB smart card reader.
I'm trying to read the data already stored by me in the Arduino kit, I'm using the physicaloid library to achieve this. I tested the kit (reading data) by connecting it to my PC using the Type B USB cable provided by Arduino itself and using Tera Term. The data begins to transfer after I press '#' on the keyboard (specific to our implementation).
But when I connect it my Android tablet and use the test project by physicaloid to open a device and start communicating, every time I click 'open' it shows a Toast saying it cannot open. I give permission to access the USB device every time it prompts me. Here is the sample program which I had created to read the data:
if(mPhysicaloid.open()){
Toast.makeText(getBaseContext(), "communicating", Toast.LENGTH_SHORT).show();
String signalToStart = new String("#");
byte[] bufToWrite = signalToStart.getBytes();
mPhysicaloid.write(bufToWrite, bufToWrite.length);
byte[] buf = new byte[255];
mPhysicaloid.read(buf);
String data = new String(buf);
tvResult.setText(data);
mPhysicaloid.close();
}
else
Toast.makeText(getBaseContext(), "no communication with device", Toast.LENGTH_LONG).show();
Now here's what I want to know about the data coming from the Arduino USB cable: is it in the RS232 format where the Android device is not able to understand (I don't know, I may be making a blunder here by asking this data format) or is it in the USB data format that is suitable for the Android device to understand? Please help, I have searched over this the whole day. What can I do to open the device and communicate?
I finally got the idea of reading the data from serial USB device. So I thought I'd share it:
First, get all the USB devices attached (if more than one) and get a suitable interface and search for endpoints to communicate with. While initializing the USB device make sure you consider the USB device which you really want to communicate with. You can do that by considering product id and Vendor id.
The code for doing the above described..
private boolean searchEndPoint() {
usbInterface = null;//class level variables, declare these.
endpointOut = null;
endpointIn = null;
Log.d("USB","Searching device and endpoints...");
if (device == null) {
usbDevices = usbManager.getDeviceList();
Iterator<UsbDevice> deviceIterator = usbDevices.values().iterator();
while (deviceIterator.hasNext()) {
UsbDevice tempDevice = deviceIterator.next();
/**Search device for targetVendorID(class level variables[vendorId = SOME_NUMBER and productId=SOME_NUMBER] which u can find) and targetProductID.*/
if (tempDevice .getVendorId() == vendorId) {
if (tempDevice .getProductId() == productId) {
device = tempDevice ;
}
}
}
}
if (device == null){
Log.d("USB","The device with specified VendorId and ProductId not found");
return false;
}
else
Log.d("USB","device found");
/**Search for UsbInterface with Endpoint of USB_ENDPOINT_XFER_BULK,
*and direction USB_DIR_OUT and USB_DIR_IN
*/
try{
for (int i = 0; i < device.getInterfaceCount(); i++) {
UsbInterface usbif = device.getInterface(i);
UsbEndpoint tOut = null;
UsbEndpoint tIn = null;
int tEndpointCnt = usbif.getEndpointCount();
if (tEndpointCnt >= 2) {
for (int j = 0; j < tEndpointCnt; j++) {
if (usbif.getEndpoint(j).getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) {
if (usbif.getEndpoint(j).getDirection() == UsbConstants.USB_DIR_OUT) {
tOut = usbif.getEndpoint(j);
} else if (usbif.getEndpoint(j).getDirection() == UsbConstants.USB_DIR_IN) {
tIn = usbif.getEndpoint(j);
}
}
}
if (tOut != null && tIn != null) {
/** This interface have both USB_DIR_OUT
* And USB_DIR_IN of USB_ENDPOINT_XFER_BULK
*/
usbInterface = usbif;
endpointOut = tOut;
endpointIn = tIn;
}
}
}
if (usbInterface == null) {
Log.d("USB","No suitable interface found!");
return false;
} else {
Log.d("USB","Suitable interface found!");
return true;
}
}catch(Exception ex){
ex.printStackTrace();
return false;
}
}
Now you have a device, USB interface, and endpoints ready for communication. Now it's time to establish a connection between your Android device and USB device.
Below is the code for this (and checking whether the connection is up and communicating):
private boolean checkUsbCOMM() {
/**Value for setting request, on the USB connection.*/
final int RQSID_SET_CONTROL_LINE_STATE = 0x22;
boolean success = false;
Log.d("USB","Checking USB Device for communication: ");
try{
Boolean permitToRead = SUSBS_usbManager.hasPermission(SUSBS_device);
if (permitToRead) {
//class level variable(connection, usbManager : declare it)
connection = usbManager.openDevice(device);
if (connection != null) {
connection.claimInterface(usbInterface, true);
int usbResult;
usbResult = connection.controlTransfer(0x21, //requestType
RQSID_SET_CONTROL_LINE_STATE, //SET_CONTROL_LINE_STATE(request)
0, //value
0, //index
null, //buffer
0, //length
500); //timeout = 500ms
Log.i("USB","controlTransfer(SET_CONTROL_LINE_STATE)[must be 0 or greater than 0]: "+usbResult);
if(usbResult >= 0)
success = true;
else
success = false;
}
}
else {
/**If permission is not there then ask for permission*/
usbManager.requestPermission(device, mPermissionIntent);
Log.d("USB","Requesting Permission to access USB Device: ");
}
return success;
}catch(Exception ex){
ex.printStackTrace();
return false;
}
}
Voila, the USB device is now able to communicate. So let's read using a separate thread:
if(device!=null){
Thread readerThread = new Thread(){
public void run(){
int usbResult = -1000;
int totalBytes = 0;
StringBuffer sb = new StringBuffer();
String usbReadResult=null;
byte[] bytesIn ;
try {
while(true){
/**Reading data until there is no more data to receive from USB device.*/
bytesIn = new byte[endpointIn.getMaxPacketSize()];
usbResult = connection.bulkTransfer(endpointIn,
bytesIn, bytesIn.length, 500);
/**The data read during each bulk transfer is logged*/
Log.i("USB","data-length/read: "+usbResult);
/**The USB result is negative when there is failure in reading or
* when there is no more data to be read[That is :
* The USB device stops transmitting data]*/
if(usbResult < 0){
Log.d("USB","Breaking out from while, usb result is -1");
break;
}
/**Total bytes read from the USB device*/
totalBytes = totalBytes+usbResult;
Log.i("USB","TotalBytes read: "+totalBytes);
for(byte b: bytesIn){
if(b == 0 )
break;
else{
sb.append((char) b);
}
}
}
/**Converting byte data into characters*/
usbReadResult = new String(sb);
Log.d("USB","The result: "+usbReadResult);
//usbResult holds the data read.
} catch (Exception ex) {
ex.printStackTrace();
}
}
};
/**Starting thread to read data from USB.*/
SUSBS_readerThread.start();
SUSBS_readerThread.join();
}
For permission, make sure you add a PendingIntent as well add the permission to your manifest.
AndroidManifest : <uses-feature android:name="android.hardware.usb.host" />
PendingIntent:
private PendingIntent mPermissionIntent;
private static final String ACTION_USB_PERMISSION = "com.android.example.USB_PERMISSION";
mPermissionIntent = PendingIntent.getBroadcast(MainActivity.this,
0, new Intent(ACTION_USB_PERMISSION), 0);
/**Setting up the Broadcast receiver to request a permission to allow the APP to access the USB device*/
IntentFilter filterPermission = new IntentFilter(ACTION_USB_PERMISSION);
registerReceiver(mUsbReceiver, filterPermission);
I have problems when I when to send messages via USB from the board to the devicersa.
Hardware:
Arduino ADK 2011
Samsung Galaxy S3, Android 4.1.2
The problem is the read method in the Android app never terminates and makes the thread get stuck:
mFileDescriptor = mUsbManager.openAccessory(accessory);
if (mFileDescriptor != null) {
mAccessory = accessory;
FileDescriptor fd = mFileDescriptor.getFileDescriptor();
Log.d(TAG, "openAccessory(): FileDescriptor instanciated. valid " + fd.valid());
mInputStream = new FileInputStream(fd);
mOutputStream = new FileOutputStream(fd);
new Thread(null, new Runnable() {
#Override
public void run() {
int ret = 0;
byte[] buffer = new byte[255];
while (ret >= 0 && mInputStream != null) {
try {
// never terminates
ret = mInputStream.read(buffer);
} catch (IOException e) {
Log.e(TAG, "openAccessory(): Could not read inputStream: " + e);
e.printStackTrace();
break;
}
} ...
The connection works fine since I use the special USB-library. When I connect the device the app opens automatically very well. But with logs I see it never passes the read command. Also the Arduinio monitor says that:
Device addressed... Requesting device descriptor.
found possible device. swithcing to serial mode
device supports protcol 1 or above
found android acessory device
config desc
interface desc
interface desc
2
4
Sending message...
Done
disconnect
The ADK sends messages, to the device in the loop (once):
sntmsg[0] = COMMAND_TEXT;
sntmsg[1] = TARGET_DEFAULT;
sntmsg[2] = 25;
for (int i = 0; i < 25; i++) {
sntmsg[3 + i] = hello[i];
}
// schreiben (buffer, length)
Serial.println("Sending message...");
acc.write(sntmsg, 3 + 25);
Serial.println("Done");
done = true;
delay(250);
Now I figured out the problem might be the disconnect. Immedeately after running through the first loop in the Arduiino code it prints disconnect to the monitor. The code in the libraries of AndroidAccessory.cpp is:
bool AndroidAccessory::isConnected(void)
{
USB_DEVICE_DESCRIPTOR *devDesc = (USB_DEVICE_DESCRIPTOR *) descBuff;
byte err;
max.Task();
usb.Task();
if (!connected &&
usb.getUsbTaskState() >= USB_STATE_CONFIGURING &&
usb.getUsbTaskState() != USB_STATE_RUNNING) {
Serial.print("\nDevice addressed... ");
Serial.print("Requesting device descriptor.\n");
err = usb.getDevDescr(1, 0, 0x12, (char *) devDesc);
if (err) {
Serial.print("\nDevice descriptor cannot be retrieved. Trying again\n");
return false;
}
if (isAccessoryDevice(devDesc)) {
Serial.print("found android acessory device\n");
connected = configureAndroid();
} else {
Serial.print("found possible device. swithcing to serial mode\n");
switchDevice(1);
}
} else if (usb.getUsbTaskState() == USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE) {
if (connected)
Serial.println("disconnect\n");
connected = false;
}
return connected;
}
So in the second loop this method returns false, even though the smartphone is still connected via usb. Do you know why it thinks it is dosconnected after the first loop iteration?
Thanks,
FL
I am new to USB and to Android so please forgive me if I don't explain myself clearly.
I have a USB HID device that I can communicate with in Windows. I am trying to establish communication using an Acer Iconia A500 tablet running Android 3.1.
I am able to find the device, enumerate it, get its only available interface, get the only available endpoint (0), and determine what type of endpoint it is (transfer interrupt from device to host).
My understanding of the USB spec is that all HID devices are required at a munimum to have a control endpoint (Endpoint 0) and an interrupt IN endpoint. But it seems that endpoint 0 here is the interrupt In endpoint, not the control endpoint.
Yet in order for the device to enumerate it must successfully transfer its descriptor data across the control endpoint. I deduce that the control endpoint therefore must be getting found (and used) because the host does, in fact, enumerate the device.
This is as far as I am able to proceed, as stated above, the only interface/endpoint presented to me at the application level is an interrupt type going from device to host. No endpoint available to my app going from host to device, interrupt or control. So the device waits to be told what to do and the host waits for something to happen in the device. Not very stimulating.
Bear in mind that this device responds properly when connected to Windows, e.g. I am able to send a report containing 13 bytes of data that causes the device to light an LED. So it seems to be complying with the USB HID spec. As an act of desperation I have tried using this one endpoint as both a control endpoint and as a interrupt OUT endpoint, using controltransfer() and UsbRequest() to submit the data to the device, no response in either case.
So my question is: "The control transfer endpoint is (?) being used to set up the device, why am I not able to find & use it?"
Thanks for any insight, below is the relevant code, I can include the rest in its entirety if needed:
private UsbManager mUsbManager;
private UsbDevice mDevice;
private UsbDeviceConnection mConnectionRead;
private UsbDeviceConnection mConnectionWrite;
private UsbEndpoint mEndpointRead;
private UsbEndpoint mEndpointWrite;
// check for existing devices
for (UsbDevice device : mUsbManager.getDeviceList().values())
{
//Need to filter for my device when other HIDs are also connected, but for now...
String devName = device.getDeviceName();
if (DEBUG == 1){
Toast.makeText(UsbHidDeviceTesterActivity.this, "My device got connected: " + devName, Toast.LENGTH_LONG).show();
}
//mDevice = device;
setHIDDevice(device);
}
private boolean setHIDDevice(UsbDevice device)
{
UsbInterface usbInterfaceRead = null;
UsbInterface usbInterfaceWrite = null;
UsbEndpoint ep1 = null;
UsbEndpoint ep2 = null;
boolean UsingSingleInterface = true;
mDevice = device;
//This HID device is using a single interface
if (UsingSingleInterface)
{
//usbInterfaceRead = device.getInterface(0x00);//only 1 EP on this interface
usbInterfaceRead = findInterface(device);
//Try getting an interface at next index
//usbInterfaceWrite = device.getInterface(0x01);//throws exception
// Try using the same interface for reading and writing
usbInterfaceWrite = usbInterfaceRead;
int endPointCount = usbInterfaceWrite.getEndpointCount();
if (DEBUG == 2)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Endpoints: " + endPointCount, Toast.LENGTH_LONG).show();
//Toast.makeText(UsbHidDeviceTesterActivity.this, "Interface: " + usbInterfaceRead, Toast.LENGTH_LONG).show();
}
if (endPointCount == 1)//only getting 1 endpoint
{
ep1 = usbInterfaceRead.getEndpoint(0);
//As an act of desperation try equating ep2 to this read EP, so that we can later attempt to write to it anyway
ep2 = usbInterfaceRead.getEndpoint(0);
}
else if (endPointCount == 2)
{
ep1 = usbInterfaceRead.getEndpoint(0);
ep2 = usbInterfaceRead.getEndpoint(1);
}
}
else // ! UsingSingleInterface
{
usbInterfaceRead = device.getInterface(0x00);
usbInterfaceWrite = device.getInterface(0x01);
if ((usbInterfaceRead.getEndpointCount() == 1) && (usbInterfaceWrite.getEndpointCount() == 1))
{
ep1 = usbInterfaceRead.getEndpoint(0);
ep2 = usbInterfaceWrite.getEndpoint(0);
}
if (DEBUG == 3)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Using Dual Interface", Toast.LENGTH_LONG).show();
}
}
//because ep1 = ep2 this will now not cause a return unless no ep is found at all
if ((ep1 == null) || (ep2 == null))
{
if (DEBUG == 4)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "One EP is null", Toast.LENGTH_LONG).show();
}
return false;
}
// Determine which endpoint is the read, and which is the write
if (ep1.getType() == UsbConstants.USB_ENDPOINT_XFER_INT)//I am getting a return of 3, which is an interrupt transfer
{
if (ep1.getDirection() == UsbConstants.USB_DIR_IN)//I am getting a return of 128, which is a device-to-host endpoint
{
mEndpointRead = ep1;
if (DEBUG == 5)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "EP1 type: " + ep1.getType(), Toast.LENGTH_LONG).show();
}
}
if (ep1.getDirection() == UsbConstants.USB_DIR_OUT)//nope
{
mEndpointWrite = ep1;
if (DEBUG == 6)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "EP1 is a write", Toast.LENGTH_LONG).show();
}
}
}
if (ep2.getType() == UsbConstants.USB_ENDPOINT_XFER_INT)
{
if (ep2.getDirection() == UsbConstants.USB_DIR_IN)
{
//Try treating it as a write anyway
//mEndpointRead = ep2;
mEndpointWrite = ep2;
}
else if (ep2.getDirection() == UsbConstants.USB_DIR_OUT)
{
//usbEndpointWrite = ep2;
mEndpointWrite = ep2;
}
}
//check that we should be able to read and write
if ((mEndpointRead == null) || (mEndpointWrite == null))
{
return false;
}
if (device != null)
{
UsbDeviceConnection connection = mUsbManager.openDevice(device);
if (connection != null && connection.claimInterface(usbInterfaceRead, true))
{
Log.d(TAG, "open SUCCESS");
mConnectionRead = connection;
// Start the read thread
//Comment out while desperately attempting to write on this connection/interface
//Thread thread = new Thread(this);
//thread.start();
}
else
{
Log.d(TAG, "open FAIL");
mConnectionRead = null;
}
}
if (UsingSingleInterface)
{
mConnectionWrite = mConnectionRead;
}
else //! UsingSingleInterface
{
mConnectionWrite = mUsbManager.openDevice(device);
mConnectionWrite.claimInterface(usbInterfaceWrite, true);
}
return true;
}
// searches for an interface on the given USB device
private UsbInterface findInterface(UsbDevice device) {
Log.d(TAG, "findInterface " + device);
int count = device.getInterfaceCount();
if (DEBUG == 7)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Interface count: " + count, Toast.LENGTH_LONG).show();
}
for (int i = 0; i < count; i++) {
UsbInterface intf = device.getInterface(i);
String InterfaceInfo = intf.toString();
Log.d(TAG, "Interface: " + InterfaceInfo);
//Class below is 3 for USB_HID
if (intf.getInterfaceClass() == 3 && intf.getInterfaceSubclass() == 0 &&
intf.getInterfaceProtocol() == 0) {
return intf;
}
//....try just returning the interface regardless of class/subclass
//return intf;
}
return null;
}
private boolean sendControlTransfer(byte[] dataToSend)
{
synchronized (this)
{
if (mConnectionRead != null)
{
//byte[] message = new byte[13]; // or 14?
byte[] message = dataToSend;
if (DEBUG == 9)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Sending Control Transfer", Toast.LENGTH_LONG).show();
}
//first field ox21 is bin 00100001 which splits into 0 01 00001 for direction(1bit)/type(2b)/recipient(5b)
//To set direction as 'host to Device' we need 0, To set type to HID we need 11 (3), and for recipient we want 00001
//second field 0x09 is class specific request code, 0x09 is listed as 'reserved for future use'
//third field 0x200 is value
//int transfer = mConnectionRead.controlTransfer(0x21, 0x9, 0x200, 0, message, message.length, 0);
//try with type set to HID
int transfer = mConnectionRead.controlTransfer(0xC1, 0x9, 0x200, 0, message, message.length, 0);
if (DEBUG == 10)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Transfer returned " + transfer, Toast.LENGTH_LONG).show();
}
}
}
return true;
}
private boolean sendInterruptTransfer(byte[] dataToSend)
{
int bufferDataLength = mEndpointWrite.getMaxPacketSize();//The write endpoint is null unless we just copy the read endpoint
if (DEBUG == 12)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Max Packet Size: " + bufferDataLength, Toast.LENGTH_LONG).show();
}
ByteBuffer buffer = ByteBuffer.allocate(bufferDataLength + 1);
UsbRequest request = new UsbRequest();
buffer.put(dataToSend);
request.initialize(mConnectionWrite, mEndpointWrite);
request.queue(buffer, bufferDataLength);
try
{
/* only use requestwait on a read
if (request.equals(mConnectionWrite.requestWait()))
{
return true;
}
*/
}
catch (Exception ex)
{
// An exception has occurred
if (DEBUG == 13)
{
Toast.makeText(UsbHidDeviceTesterActivity.this, "Caught Write Exception", Toast.LENGTH_LONG).show();
}
}
return true;
}
So, I have been researching similar things. I cannot confirm, but what I believe is happening is:
Android does not list the control endpoint when it enumerates it's endpoints. It only lists other endpoints.
A connection to any endpoint can send control transfers to endpoint 0, through the controlTransfer method, which (quoting from the api) "Performs a control transaction on endpoint zero for this device."
So, in your above code, I would use the 0th endpoint as an interrupt input endpoint, but it will still allow for control transfers.
An example of someone using a HID device is the Missle Launcher demo, the device it uses is a HID device with an interrupt endpoint.
You can get a full list of the details of interfaces and endpoint by using the following:
UsbManager mManager = (UsbManager) getSystemService(Context.USB_SERVICE);
HashMap<String, UsbDevice> deviceList = mManager.getDeviceList();
Iterator<UsbDevice> deviceIterator = deviceList.values().iterator();
while (deviceIterator.hasNext())
{
UsbDevice device = deviceIterator.next();
Log.i(TAG,"Model: " + device.getDeviceName());
Log.i(TAG,"ID: " + device.getDeviceId());
Log.i(TAG,"Class: " + device.getDeviceClass());
Log.i(TAG,"Protocol: " + device.getDeviceProtocol());
Log.i(TAG,"Vendor ID " + device.getVendorId());
Log.i(TAG,"Product ID: " + device.getProductId());
Log.i(TAG,"Interface count: " + device.getInterfaceCount());
Log.i(TAG,"---------------------------------------");
// Get interface details
for (int index = 0; index < device.getInterfaceCount(); index++)
{
UsbInterface mUsbInterface = device.getInterface(index);
Log.i(TAG," ***** *****");
Log.i(TAG," Interface index: " + index);
Log.i(TAG," Interface ID: " + mUsbInterface.getId());
Log.i(TAG," Inteface class: " + mUsbInterface.getInterfaceClass());
Log.i(TAG," Interface protocol: " + mUsbInterface.getInterfaceProtocol());
Log.i(TAG," Endpoint count: " + mUsbInterface.getEndpointCount());
// Get endpoint details
for (int epi = 0; epi < mUsbInterface.getEndpointCount(); epi++)
{
UsbEndpoint mEndpoint = mUsbInterface.getEndpoint(epi);
Log.i(TAG," ++++ ++++ ++++");
Log.i(TAG," Endpoint index: " + epi);
Log.i(TAG," Attributes: " + mEndpoint.getAttributes());
Log.i(TAG," Direction: " + mEndpoint.getDirection());
Log.i(TAG," Number: " + mEndpoint.getEndpointNumber());
Log.i(TAG," Interval: " + mEndpoint.getInterval());
Log.i(TAG," Packet size: " + mEndpoint.getMaxPacketSize());
Log.i(TAG," Type: " + mEndpoint.getType());
}
}
}
Log.i(TAG," No more devices connected.");
}
Control transfer doesn't show any interface descriptor and its endpoint number is 0 by default, for both in and out transfer.
if you have other interfaces the index of those interfaces should start from 0 i.e. default control transfer interface does not count.
So your interface 0 holds the endpoint 1 descriptor. use the UsbEndpoint methods to find the attributes of the endpoint whether it is interrupt type or not. if it is then endpoint type by UsbEndpoint.getType() should return 0x03 and endpoint number by UsbEndpoint.getEndpointNumber() should return 0x81 which is usual value for endpoint 1.
below your code is wrong:
//first field ox21 is bin 00100001 which splits into 0 01 00001 for direction(1bit)/type(2b)/recipient(5b)
//To set direction as 'host to Device' we need 0, **To set type to HID we need 11 (3)**, and for recipient we want 00001
//second field 0x09 is class specific request code, **0x09 is listed as 'reserved for future use'**
//**third field 0x200 is value**
//int transfer = mConnectionRead.controlTransfer(0x21, 0x9, 0x200, 0, message, message.length, 0);
//try with type set to HID
int transfer = mConnectionRead.controlTransfer(0xC1, 0x9, 0x200, 0, message, message.length, 0);
Type 2 bits is used to indicate class specific request, i.e. its value is 01,
0x09 is Hid class specific request SET_REPORT, not reserved.
value is the wValue which is used as Report ID for Hid class, for your case it is probably 0, if you have only one report at you HID descriptor.
and the 4 th parameter is wIndex which should be used to indicate the recipient, for your case it should be 0x01 for interface as recipient.
So your code for control transfer for Read or receive data form device should be:
int transfer = mConnectionRead.controlTransfer(0xA1, 0x01, 0x00, 0x01, message, message.length, 0);
where 0x01 in second parameter is GET_REPORT is Hid calls specific request.
And your code for control transfer for Write or send data to device should be:
int transfer = mConnectionWrite.controlTransfer(0x21, 0x09, 0x00, 0x01, message, message.length, 0);
Since you only have Interrupt IN endpoint 1, Bulk or Interrupt transfer should be like:
int transfer = bulkTransfer (ep1, message, message.length, 0);
to have the interrupt Out endpoint there should be a endpoint descriptor for that at the interface descriptor of firmware of your device.
Maybe it is a late answer or off topic. However, I hope someone will one day find this answer useful.
Github now contains great Android libraries to communicate with custom HID devices:
Mine in Kotlin
in Java
The good thing is that if you are lucky, then you only need to know the device VID:PID and the commands it accepts. You don't need to worry about USB protocol or communication details.
If interested about how USB works, then you can have a closer look at library source code.
I am trying to make application for reading external storage file system connected using OTG cable to XOOM with ICS.
i am using this code to determine IN and OUT endpoint for communication with flash device
final UsbDeviceConnection connection = manager.openDevice(device);
UsbInterface inf = device.getInterface(0);
if (!connection.claimInterface(inf, true)) {
Log.v("USB", "failed to claim interface");
}
UsbEndpoint epOut = null;
UsbEndpoint epIn = null;
// look for our bulk endpoints
for (int i = 0; i < inf.getEndpointCount(); i++) {
UsbEndpoint ep = inf.getEndpoint(i);
if (ep.getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) {
if (ep.getDirection() == UsbConstants.USB_DIR_OUT) {
epOut = ep;
} else {
epIn = ep;
}
}
}
if (epOut == null || epIn == null) {
throw new IllegalArgumentException("not all endpoints found");
}
final UsbEndpoint inEndPoint = epIn;
it works normal.
then i am trying to read first 512 bytes to get FAT32 boot sector
ByteBuffer arg1 = ByteBuffer.allocate(512);
UsbRequest request = new UsbRequest();
request.initialize(connection, inEndPoint);
request.queue(arg1, inEndPoint.getMaxPacketSize());
UsbRequest result = connection.requestWait(); // halt here
connection.releaseInterface(inf);
connection.close();
but it does not read any data from connected device.
all this code run on separate thread after granding permission on device
PendingIntent mPermissionIntent = PendingIntent.getBroadcast(USBHostSampleActivity.this, 0, new Intent(ACTION_USB_PERMISSION), 0);
IntentFilter filter = new IntentFilter(ACTION_USB_PERMISSION);
registerReceiver(mUsbReceiver, filter);
manager.requestPermission(lDevices.get(position),mPermissionIntent);
in Broadcast receiver i just start new thread with previous code;
i also tried to make call to
USBDeviceConnection.controlTransfer
byte[] b = new byte[0x10];
int cTransfer = connection.controlTransfer(128, 6, 16, 0,b, 12, 0);
like in libusb sample to get f0 data and/or hwstats but it always return -1
also i tried replace async request using USBRequst to sync bulkTransfers but result is the same.
Have anyone worked with this part of Android SDK?
Thanks!
It appears you are missing a whole protocol layer; you can't just read 512 bytes from the device. What should it send back? How could it know you want to start to read at the beginning of the disk?
How you actually read a memory location from USB-MSC device depends on the device sub class type and the supported transport protocol.
It is likely that an ordinary flash disk uses the SCSI transparent command set in conjunction with the USB Mass Storage Class Bulk-Only (BBB) Transport.
You have to examine the device descriptor to find out what your device supports. See also the MSC device class overview for all possible values and references to their documentation.
I wrote a library for that called libaums: https://github.com/mjdev/libaums
The library takes care of low level USB communication and implements the FAT32 file system. It also includes an example app. Listing a directory would work as follows:
UsbMassStorageDevice[] devices = UsbMassStorageDevice.getMassStorageDevices(this);
device.init();
// we only use the first device
device = devices[0];
// we always use the first partition of the device
FileSystem fs = device.getPartitions().get(0).getFileSystem();
Log.d(TAG, "Capacity: " + fs.getCapacity());
Log.d(TAG, "Occupied Space: " + fs.getOccupiedSpace());
Log.d(TAG, "Free Space: " + fs.getFreeSpace());
UsbFile root = fs.getRootDirectory();
for(UsbFile f : root.listFiles())
Log.d(TAG, f.getName())