I am learning to code for Android and I have a problem with... maybe performance?
I want to play very short sound every second. I have created a CountDownTimer (with tick interval 20ms so very accurate) and putted there in onTick to play it. But the sound is played not precisely after one second and I can hear this - this is the problem...
fragment of my code:
private class ExerciseCountDownTimer extends CountDownTimer
{
...
public void onTick(long millisUntilFinished)
{
...
if(/*this is a next second not just a tick*/)
playSound(R.raw.quick_rest, true);
}
}
private void playSound(int resId, boolean releaseAfter)
{
if (currentMediaPlayerRes != resId || mediaPlayer == null)
{
if (mediaPlayer != null)
{
if (mediaPlayer.isPlaying())
mediaPlayer.stop();
mediaPlayer.reset();
mediaPlayer.release();
}
currentMediaPlayerRes = resId;
mediaPlayer = MediaPlayer.create(this, resId);
if (releaseAfter)
{
mediaPlayer.setOnCompletionListener(new MediaPlayer.OnCompletionListener()
{
#Override
public void onCompletion(MediaPlayer mp)
{
mediaPlayer.release();
mediaPlayer = null;
}
});
}
}
mediaPlayer.start();
}
Is it possible to have counter like this?
use this code to play a music one time
MediaPlayer AlarmMusic;
AlarmMusic = MediaPlayer.create(G.context, R.raw.music1);
AlarmMusic.setLooping(false);
AlarmMusic.start();
this worked for me !
Because of the lack of real time guarantees in Java/Android, using one thread to cue another probably will always have some inaccuracy.
I can think of two approaches that might work for you:
(1) make the sound file exactly 1 second long, e.g., 44100 frames at 44100 fps, if you are using the standard "CD-quality" format that Java supports. The sound file can probably be edited with Audacity to an exact frame length. Then, use a looping playback.
(2) Open a line for streaming audio. I can't recall exactly what the Android-supported command is for this, but I know it exists. With it, count elapsing frames while sending silence (bytes with 0 value). When you get to the 44100th frame, start feeding the PCM data that you wish to hear. When it is done, go back to feeding 0's until the next 44100 frame arrives. Never stop the line--keep it running in its own thread, probably with a high priority. It is generally okay to give audio a high priority (as long as you are doing nothing else on the line) as audio spends a vast majority of its time in a "blocked" state during which it is yielding to other lines.
A fellow on java-gaming.org made a metronome and got it working on Android. I bet if you search for "metronome" on that site, his thread will pop up and have some useful info. He basically used the second approach that I described above.
I am using SoundPool to play sfx sounds in a game on Android. In most cases it works perfectly, except sometimes I need to stop all sounds at once not pause (doesn't matter if they are set to loop or not).
I can't figure out how to stop a sound from playing without knowing the StreamID of that sound. What I know:
soundpool.load(...some sound...) returns a soundID
soundpool.play(soundID) plays the sound and returns a streamID
soundpool.stop(streamID) stops the sound
My question is, how can I stop a sound without knowing the streamID ? I tried tracking all streamIDs in a list, but sometimes there are so many short streams playing at once, that it won't work. And I can't find any method in SoundPoolto get the active streamIDs. Does anyone know how to stop all sounds?
Any hint is appreciated! thanks
I'd recommend using autoPause() and autoResume() to pause and restart your sounds. This function is part of the soundpool:
http://developer.android.com/reference/android/media/SoundPool.html#autoPause()
What about using .release() ? Accourding to the documentation:
Release the SoundPool resources. Release all memory and native resources used by the SoundPool object. The SoundPool can no longer be used and the reference should be set to null.
I think it also stops everything. (Actually it was causing a bug at one of my apps, that's why I say it)
However, I believe that if you want to play any sounds later, you may have to load them again.
SoundPool doesn't have a method to retrieve the streamID from the index of the stream, like it should. So even when you know the maximum number of streams, you can't just iterate through like the following:
for(int index=0;index<MAXSTREAMS;index++){
int streamid = SoundPool.getStreamID(index);//getStreamID action doesn't exist :(
soundpool.stop(streamid);
}
As you mentioned, the coder has to manage this himself with a list. I implement the declaration as follows:
List<Integer> streams = new ArrayList<Integer>();
You can add and remove soundIDs to this list as you play and stop sounds as follows:
streams.add(batattack_soundID);
streams.remove(Integer.valueOf(batattack_soundID));//NOT streams.remove(batattack_soundID);
Be sure to use Integer.valueOf() or .remove() will interpret your parameter as an index position, likely giving you an IndexOutOfBoundsException.
To clean everything up you can code as follows:
for (Integer stream : streams) {
soundPool.stop(stream);
}
streams.clear();
I have followed Igor Khrupin's tutorial on streaming mp3 files in Android using the MediaPlayer class: http://www.hrupin.com/2011/02/example-of-streaming-mp3-mediafile-with-android-mediaplayer-class
This is all working fine except that the primary progress of the seek bar is not updating correctly. It stops just after the beginning. On debugging this, I can see that the MediaPlayer.getCurrentPosition() method is always returning 261 (milliseconds) even though the mp3 song is playing fine.
Has anyone come across this issue before or got any ideas on how to fix it?
Many thanks
I also had the same problem. I solved the problem by determining the type of stream using the setAudioStreamType(int) method:
Uri myUri = ....; // initialize Uri here
MediaPlayer mediaPlayer = new MediaPlayer();
mediaPlayer.setAudioStreamType(AudioManager.STREAM_MUSIC);
mediaPlayer.setDataSource(getApplicationContext(), myUri);
mediaPlayer.prepare();
mediaPlayer.start();
I found the problem here. Firstly, the emulator I was running on did not have audio turned on, so I needed to add the audio enabled boolean in the AVD manager in eclipse. Not having audio turned on is what was causing it to always return 261 milliseconds. There was also a second problem. See the 2 code snippets below. The first was my code and the second is the code from the tutorial. There is a subtle difference (number of brackets) which causes the first one to always evaluate to 0.
seekBarProgress.setProgress((int)((float) mediaPlayer.getCurrentPosition() / getMp3Duration()) * 100);
seekBarProgress.setProgress((int) (((float) mediaPlayer.getCurrentPosition() / getMp3Duration()) * 100));
I am programming for android 2.2 and am trying to using the
SoundPool class to play several sounds simultaneously but at what feel like random times sound will stop coming out of the speakers.
for each sound that would have been played this is printed in the logcat:
AudioFlinger could not create track. status: -12
Error creating AudioTrack
Audio track delete
No exception is thrown and the program continues to execute without any changes except for the lack of volume. I've had a really hard time tracking down what conditions cause the error or recreating it after it happens. I can't find the error in the documentation anywhere and am pretty much at a loss.
Any help would be greatly appreciated!
Edit: I forgot to mention that I am loading mp3 files, not ogg.
i had almost this exact same problem with some sounds i was attempting to load and play recently.
i even broke it down to loading a single mp3 that was causing this error.
one thing i noted: when i loaded with a loop of -1, it would fail with the "status 12" error, but when i loaded it to loop 0 times, it would succeed. even attempting to load 1 time failed.
the final solution was to open the mp3 in an audio editor and re-edit it with slightly lesser quality so that the file is now smaller, and doesn't seem to take up quite as many resources in the system.
finally, there is this discussion that encourages performing a release on the objects you are using, because there is indeed a hard limit on the resources that can be used, and it is system-wide, so if you use several of the resources, other apps will not be able to use them.
https://groups.google.com/forum/#!topic/android-platform/tyITQ09vV3s/discussion%5B1-25%5D
For audio, there's a hard limit of 32 active AudioTrack objects per
device (not per app: you need to share those 32 with rest of the system), and AudioTrack is used internally beneath SoundPool,
ToneGenerator, MediaPlayer, native audio based on OpenSL ES, etc. But
the actual AudioTrack limit is < 32; it depends more on soft factors
such as memory, CPU load, etc. Also note that the limiter in the
Android audio mixer does not currently have dynamic range compression,
so it is possible to clip if you have a large number of active sounds
and they're all loud.
For video players the limit is much much lower due to the intense load
that video puts on the device.
I'll use this as an opportunity to remind media developers: please
remember to call release() for media objects when your app is paused.
This frees up the underlying resources that other apps will need.
Don't rely on the media objects being cleaned up in finalize by the
garbage collector, as that has unpredictable timing.
I had a similar issue where the music tracker within my Android game would drop notes and I got the Audioflinger error (although my status was -22). I got it working however so this might help some people.
The problem occurred when a single sample was being output multiple times simultaneously. So in my case it was a single sample being played on two or more tracks. This seemed to occasionally deadlock or something and one of the two notes would be dropped. The solution was to have two copies of the sample (two actual ogg files - identical but both in the assets). Then on each track even although I was playing the same sample, it was coming from a different file. This totally fixed the issue for me.
Not sure why it works as I cache the samples into memory, but even loading the same file into two different sounds didn't fix it. Only when the samples came out of two different files did the errors go away.
I'm sure this won't help everyone and it's not the prettiest fix but it might help someone.
john.k.doe is right. You must reduce the size of your mp3 file. You should keep the size under 100kb per file. I had to reduce my 200kb file to 72kb using a constante bit rate(CBR) of 32kbps instead of the usual 128kbps. That worked for me!
Try
final ToneGenerator tg = new ToneGenerator(AudioManager.STREAM_NOTIFICATION, 50);
tg.startTone(ToneGenerator.TONE_PROP_BEEP, 200);
tg.release();
Releasing should keep your resources.
I was with this problem. In order to solve it i run the method .release() of SoundPool object after finish playing the sound.
Here's my code:
SoundPool pool = new SoundPool(10, AudioManager.STREAM_MUSIC, 50);
final int teste = pool.load(this.ctx,this.soundS,1);
pool.setOnLoadCompleteListener(new OnLoadCompleteListener(){
#Override
public void onLoadComplete(SoundPool sound,int sampleId,int status){
pool.play(teste, 20,20, 1, 0, 1);
new Thread(new Runnable(){
#Override
public void run(){
try {
Thread.sleep(2000);
pool.release();
} catch (InterruptedException e) { e.printStackTrace(); }
}
}).start();
}
});
Note that in my case my sounds had length 1-2 seconds max, so i put the value of 2000 miliseconds in Thread.sleep(), in order to only release the resources after the player have had finished.
Like said above, there is a problem with looping: when I set repeat to -1 I get this error, but with 0 everything is working properly.
I've noticed that some sounds give this error when I'm trying to play them one by one. For example:
mSoundPool.stop(mStreamID);
mStreamID = mSoundPool.play(mRandID, mVolume, mVolume, 1, -1, 1f);
In such case, first track is played ok, but when I switch sounds, next track gives this error. It seems that using looping, a buffer is somehow overloaded, and mSoundPool.stop cannot release resources immediately.
Solution:
final Handler handler = new Handler();
handler.postDelayed(new Runnable() {
#Override
public void run() {
mStreamID = mSoundPool.play(mRandID, mVolume, mVolume, 1, -1, 1f);
}, 350);
And it's working, but delay is different for different devices.
In my case, reducing the quality and thereby the file sizes of the MP3's to under 100kb wasn't sufficient, as some 51kb files worked while some longer duration 41kb files still did not.
What helped us was reducing the sample rate from 44100 to 22050 or shortening the duration to less than 5 seconds.
I see too many overcomplicated answer. Error -12 means that you did not release the variables.
I had the same problem after I played an OGG audio file 8 times.
This worked for me:
SoundPoolPlayer onBeep; //Global variable
if(onBeep!=null){
onBeep.release();
}
onBeep = SoundPoolPlayer.create(getContext(), R.raw.micon);
onBeep.setOnCompletionListener(
new MediaPlayer.OnCompletionListener() {
#Override
public void onCompletion(MediaPlayer mp) { //mp will be null here
loge("ON Beep! END");
startGoogleASR_API_inner();
}
}
);
onBeep.play();
Releasing the variable right after .play() would mess things up, and it is not possible to release the variable inside onCompletion, so notice how I release the variable before using it(and checking for null to avoid nullpointer exceptions).
It works like charm!
A single soundPool has an internal memory limitation of 1 (one) Mb. You might be hitting this if your sound is very high quality. If you have many sounds and are hitting this limit, just create more soundpools, and distribute your sounds across them.
You may not even be able to reach the hard track limit if you are running out of memory before you get there.
That error not only appears when the stream or track limit has been reached, but also the memory limit. Soundpool will stop playing old and/or de-prioritized sounds in order to play a new sound.
When I add code to attach a BassBoost effect, the onCompletionListener of my MediaPlayer is fired immediately. Here's the relevant code:
player.setDataSource(context, Uri.parse(song.filename));
// everything is fine if I comment out these 3 lines
BassBoost boost = new BassBoost(0, player.getAudioSessionId());
boost.setStrength((short) 1000);
player.attachAuxEffect(boost.getId());
player.prepare();
player.start();
I have experimented with the order of this particular code to no avail. Finally, I logged the getCurrentPosition() and getDuration() values in the completion handler and wouldn't you know it: they're both zero!
My current thought is that attaching the effect requires asynchronous preparation, but I haven't been able to find any further clues.
I figured it out from another question being answered. If you specify the audio session in the effect constructor and then call attachAuxEffect, it will fail. This works:
BassBoost boost = new BassBoost(0, player.getAudioSessionId());
boost.setStrength((short) 1000);
// ALREADY ATTACHED IN CONSTRUCTOR ... player.attachAuxEffect(boost.getId());